Rincoe Manto Beast 228W VV Variable Voltage Vape Box Mod 18650
Features
Powered by 2 x 18650 batteriss (not included)
Charging: 5V / 2A
PCB Efficiency: 95%
Input Voltage: 6.4~8.4V
Output Voltage: 1~8V
Max Output Current: 40A
Lightweight with PC material
5-Level voltage adjustment
Fast firing speed of 0.004S
Type-C charging cable
228W max power with dual 18650 cells
Multiple battery protections: Overheating protection, Reverse battery protection, Overload / short-circuit protection
Blackjam Ubertoot UAE2 22mm RTA w/Nano Kit 2.5ml/5ml
Features
Adjustable airflow from 0mm-3mm（exchangeable airflow pins size1.2/1.8/2.5mm）
Materials: Full 316 stainless steel,Ultem PEI tank ,Gold plated brass adjustable 510 pin
Juice control: Adjustable (internal)
Diameter 22mm
Juice capacity: Standard 5ml, (Short 2.5ml)
Drip tip: Black derlin interchangeable 510
Auguse Draw RTA Pod Cartridge for Voopoo Drag S / X Vape Pod System 4.5ml
Features
Stainless steel construction
Acrylic tank holds 4.5ml capacity
Draw RTA Style Rebuildable Tank Pod Cartridge
Suitable for Voopoo Drag S / X Vape Pod System Vape Kit
ULTON Tripod Style 316SS 22mm RTA
The Deck
The deck of the Tripod is targeted for single coil setups with design details aiming to facilitate and improve rebuilding process as much as possible. Focusing on some of them, you can see high precision large pan head phillips post screws, conveniently placed rails to capture wire either between rail and screw head / body or around screw body (depending on wire D), cut – outs on outer deck rim for easier rebuilding, cut – outs on inner deck rim plus cotton wells to help proper cotton placement and juice distribution along cotton body, sufficient liquid intake slots on deck sides ( approx. 4.0mm x 2.0mm). The Tripod deck can literally host any size of single coil build, from classic small sized ones up to larger exotic coils.
The Air Flow
You may tune air flow via four pin options, each one with air hole D=1.0mm/1.2mm/ 1.5mm/1.8mm pinned inside a D=4.0mm nest. You may also regulate more “airy” flow via the AFCS Ring, adjusting from zero to D=4.0mm.
The Drip Tip
Another interesting point is the custom drip tip that comes with the device. This is a two-parts assembly as well, with its two parts sandwiching the Top Cap to ensure extra stability when removing top cap to refill. The drip tip is easily removable to let you use your own 510 drip tip.
Optimised Ergonomics
A thread-less mechanism with twist and pull / push actions in order to design and manufacture high precision parts that make vaping with an RTA so much easier. Instant access to deck can’t get any simpler and quicker. You just twist, align the small triangles that are located on the sides of chimney and deck and then pull in order to access to your deck super quickly, any time, even with a full tank. Same with refilling, as good old screw on threaded cap is no longer here. Simply align triangle on side of the top cap with the dot on the rim right below and pull up to refill through the large liquid slots. Don’t need to worry if you find it hard to spot dots and triangles: If you twist and pull gently you will definitely get it when you reach to the aligned – unlocking point of each mechanism.
Features
Powered by 2 x 18650 batteriss (not included)
Charging: 5V / 2A
PCB Efficiency: 95%
Input Voltage: 6.4~8.4V
Output Voltage: 1~8V
Max Output Current: 40A
Lightweight with PC material
5-Level voltage adjustment
Fast firing speed of 0.004S
Type-C charging cable
228W max power with dual 18650 cells
Multiple battery protections: Overheating protection, Reverse battery protection, Overload / short-circuit protection
Blackjam Ubertoot UAE2 22mm RTA w/Nano Kit 2.5ml/5ml
Features
Adjustable airflow from 0mm-3mm（exchangeable airflow pins size1.2/1.8/2.5mm）
Materials: Full 316 stainless steel,Ultem PEI tank ,Gold plated brass adjustable 510 pin
Juice control: Adjustable (internal)
Diameter 22mm
Juice capacity: Standard 5ml, (Short 2.5ml)
Drip tip: Black derlin interchangeable 510
Auguse Draw RTA Pod Cartridge for Voopoo Drag S / X Vape Pod System 4.5ml
Features
Stainless steel construction
Acrylic tank holds 4.5ml capacity
Draw RTA Style Rebuildable Tank Pod Cartridge
Suitable for Voopoo Drag S / X Vape Pod System Vape Kit
ULTON Tripod Style 316SS 22mm RTA
The Deck
The deck of the Tripod is targeted for single coil setups with design details aiming to facilitate and improve rebuilding process as much as possible. Focusing on some of them, you can see high precision large pan head phillips post screws, conveniently placed rails to capture wire either between rail and screw head / body or around screw body (depending on wire D), cut – outs on outer deck rim for easier rebuilding, cut – outs on inner deck rim plus cotton wells to help proper cotton placement and juice distribution along cotton body, sufficient liquid intake slots on deck sides ( approx. 4.0mm x 2.0mm). The Tripod deck can literally host any size of single coil build, from classic small sized ones up to larger exotic coils.
The Air Flow
You may tune air flow via four pin options, each one with air hole D=1.0mm/1.2mm/ 1.5mm/1.8mm pinned inside a D=4.0mm nest. You may also regulate more “airy” flow via the AFCS Ring, adjusting from zero to D=4.0mm.
The Drip Tip
Another interesting point is the custom drip tip that comes with the device. This is a two-parts assembly as well, with its two parts sandwiching the Top Cap to ensure extra stability when removing top cap to refill. The drip tip is easily removable to let you use your own 510 drip tip.
Optimised Ergonomics
A thread-less mechanism with twist and pull / push actions in order to design and manufacture high precision parts that make vaping with an RTA so much easier. Instant access to deck can’t get any simpler and quicker. You just twist, align the small triangles that are located on the sides of chimney and deck and then pull in order to access to your deck super quickly, any time, even with a full tank. Same with refilling, as good old screw on threaded cap is no longer here. Simply align triangle on side of the top cap with the dot on the rim right below and pull up to refill through the large liquid slots. Don’t need to worry if you find it hard to spot dots and triangles: If you twist and pull gently you will definitely get it when you reach to the aligned – unlocking point of each mechanism.