Hi all, new guy here. I've been vaping for about 4 months, spent more money than I care to admit buying mods. Well, I recently picked up a RX75 kr kit to put a bigger tank on. I was assured that my tobeco tanks would fit. They do but I keep getting the no atomizer found message on the screen. It has a spring loaded pin and the tanks I have don't make a connection because they are fairly flush compared to the one on the tank that came with it. It's there an adapter made that can remedy this problem? I love these tobeco tanks and would like to use them instead of the one that came with it. Thanks in advance!
Become a Patron!
RX75 kr no atomizer found
- Thread starter lowss97
- Start date
PreparationHero
I drink and I know things
VU Donator
Bronze Contributor
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
This should probably be in the help forum vapingunderground.com/forums/help-topics.15/
I don't have any tobeco tanks so I'm not sure, but they probably have a line on the bottom of the connecting pin on the bottom of the tank, use a Phillips head screw driver to extend that a slight turn at a time then test the connection, and make sure the Tank is empty first. Another problem could be the coils you're putting in, try replacing it, with a different resistance if possible.
Like I said I've never had those tanks, but those suggestions usually fixed the problem with the tanks I did have.
I don't have any tobeco tanks so I'm not sure, but they probably have a line on the bottom of the connecting pin on the bottom of the tank, use a Phillips head screw driver to extend that a slight turn at a time then test the connection, and make sure the Tank is empty first. Another problem could be the coils you're putting in, try replacing it, with a different resistance if possible.
Like I said I've never had those tanks, but those suggestions usually fixed the problem with the tanks I did have.
Last edited:
PreparationHero
I drink and I know things
VU Donator
Bronze Contributor
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
Definitely the mod then. I read up on it and most people are having problems with the lock switch. Spinfuel.com seems to be the only one who had the same problem..
don’t mind that the 510 connector is set downinto the front of the device, but because access to the atomizer is limited, unscrewing the atomizer takes a few seconds longer than it should. It’s not a simple ‘hold and unscrew’ situation.
"On the plus side, you can use any 22mm atomizer with the Reuleaux Rx75. That said, after using the device for a day or so I went through a short period where every atomizer I used on theReuleaux Rx75 caused the device to display aShort Circuit error. After trying half a dozen tanks, I shut the device down, removed the battery, made sure there wasn’t anything blocking a secure connection to the 510 connector, then tried it again. After that, only the Armor atomizer shorted out sporadically."
I can't find anything on fixes, you might want to contact the manufacturer about a replacement, or where you bought it from. Sorry I can't be of more help.
don’t mind that the 510 connector is set downinto the front of the device, but because access to the atomizer is limited, unscrewing the atomizer takes a few seconds longer than it should. It’s not a simple ‘hold and unscrew’ situation.
"On the plus side, you can use any 22mm atomizer with the Reuleaux Rx75. That said, after using the device for a day or so I went through a short period where every atomizer I used on theReuleaux Rx75 caused the device to display aShort Circuit error. After trying half a dozen tanks, I shut the device down, removed the battery, made sure there wasn’t anything blocking a secure connection to the 510 connector, then tried it again. After that, only the Armor atomizer shorted out sporadically."
I can't find anything on fixes, you might want to contact the manufacturer about a replacement, or where you bought it from. Sorry I can't be of more help.
I've not had any issues with the tank that came with it or the on off switch, always works. You can put any 22mm tank on it but if it doesn't have an adjustable pin or spring loaded pin they won't make the connection to fire. I've seen the cooling fins attachment that have an adjustable pin on them, kinda wondering if one of them might help.