Become a Patron!

Sapor major flavor build?

mreeveshp

Bronze Contributor
Member For 5 Years
What's a good major amount of flavor build for the sapor using either SS or kanthal. Like which wire should I use, what ohms, and what ID to use. I just got a sapor on recommendations that it has amazing flavor and so far it's just decent and my velocity, heaven's and hell, alliance, and even doge are giving me the same.

Sent from my VS990 using Tapatalk
 

mach1ne

Gold Contributor
Member For 4 Years
i found it can be a little picky about everything. my favorite setup for it right now is a little fused clapton (2x28g kanthal/38 or 40g n80 wrap) at 2.5mm and 4 wraps. it seems like the key to getting the most out of it is to make sure everything is tidy inside. i make sure my coils are directly under the airflow slots in the cap, and about 1mm away from touching them. my wicks are skinny and they just hang straight down from the coils, without touching the posts, or taking up too much room underneath the coils. in my collection, the only rda that competes with the sapor for flavor is the petri, though its a bit more work to get there.
 

Heartsdelight

VU Donator
Diamond Contributor
Member For 5 Years
i found it can be a little picky about everything. my favorite setup for it right now is a little fused clapton (2x28g kanthal/38 or 40g n80 wrap) at 2.5mm and 4 wraps. it seems like the key to getting the most out of it is to make sure everything is tidy inside. i make sure my coils are directly under the airflow slots in the cap, and about 1mm away from touching them. my wicks are skinny and they just hang straight down from the coils, without touching the posts, or taking up too much room underneath the coils. in my collection, the only rda that competes with the sapor for flavor is the petri, though its a bit more work to get there.
I'm going to try & remember your tips next time I build on mine. Thanks! & thanks @mreeveshp for asking!
 

mreeveshp

Bronze Contributor
Member For 5 Years
Great now I gotta get my hands on n80 all I got is stainless and kanthal no one carries n80 around but a guy gave me some n90 it was enough to build 2 coils with and I liked it so I know I'm going to like it. I was just trying to stay away from nickel cause you can't use it in wattage mode.

Sent from my VS990 using Tapatalk
 

mreeveshp

Bronze Contributor
Member For 5 Years
And with stainless all I got is 24 gauge right now kanthal I'm set and ni200 I have 28-32 but haven't touched the stuff cause I can't get spaced coils with it. Finally tried titanium someone gave me in 24 gauge and it's just okay so I don't know what I'm going to use it for

Sent from my VS990 using Tapatalk
 

mreeveshp

Bronze Contributor
Member For 5 Years
The stores I go to only carry 20-24 stainless they are going to start at least carrying 26 for me but I am looking at doing a larger order of 22-3? Of stainless and maybe 22-3? Ni chrome I just don't know how high I want to go just yet but I need to go high enough to make claptons so probably 36 for both

Sent from my VS990 using Tapatalk
 

mreeveshp

Bronze Contributor
Member For 5 Years
Usually I use kanthal for my inner and my ni200 for my outer but now that I've tried stainless and ni chrome and love them I want to get them I just like stainless better because I can use it on temp control and I just noticed today that the temp mode on my X cube mini is stronger and better than my tarot that goes all the way to 200w

Sent from my VS990 using Tapatalk
 

Heartsdelight

VU Donator
Diamond Contributor
Member For 5 Years
The stores I go to only carry 20-24 stainless they are going to start at least carrying 26 for me but I am looking at doing a larger order of 22-3? Of stainless and maybe 22-3? Ni chrome I just don't know how high I want to go just yet but I need to go high enough to make claptons so probably 36 for both

Sent from my VS990 using Tapatalk
Try Temcoindustrial.com online, lots of peeps use their wire, fast, good quality & great pricing.
 

VU Sponsors

Top