Become a Patron!
sigelei 75w tc rda coil build help
- Thread starter Rincones
- Start date
I don't know that tank. However, if it's a single coil, the following might help.
CurlyxCracker
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Dual coil will not fit in that rba head. You need 14 wraps with both coils with a 2.5 ID with 26 awg ni200.
CurlyxCracker
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
That's to reach the lowest (0.05 ohms) it will fire at
CurlyxCracker
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
I highly recommend either 28/30 awg ni200 for dual coils
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I use a makowar, freakshow or freakshow mini for single coil tc builds with 26g
Most of the newer RDAs either don't have single coil options or too little airflow for me on single coil mode.
But I've found a 3mm inside diameter and tempered 28g ni200 to work best for me with dual coil nickel. same thing but 26g for single coil.
I did try that 14wrap dual on a tugboat just to see how it would work. And it wasn't bad but I had to do contact coils to fit it in the hole
Most of the newer RDAs either don't have single coil options or too little airflow for me on single coil mode.
But I've found a 3mm inside diameter and tempered 28g ni200 to work best for me with dual coil nickel. same thing but 26g for single coil.
I did try that 14wrap dual on a tugboat just to see how it would work. And it wasn't bad but I had to do contact coils to fit it in the hole
I'm useing a madhater mini with dual and single option I think ima try single coil tomaro not really likeing dual having issues with the coil wraps burning to fast pretty much turning black not use to that I've never had that issue with kanthal but yet again I'm new with ni200 might be doin something wrong .... Wat temp and watts do u recommend if u don't mind me asking thanks
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Ive never seen a madhatter in real life but I think its similar to the freakshow mini.
Normally a single coil 26g I would set at 38j/520°
Topically I would build it at a 0.07 ohms
On the freakshow mini I had to do 2.5mm instead of 3 because the coil would get close to the roof of the atty and arc. I switched to the Cuff Cap which opened it Io enough to go back to the 3mm.... something to look out for.
Also- you aren't dry burning it are you?
Ya I'm sure they similar I've seen pics kinda the same and on the j thang idk if my sigelei does that on my screen it's watts volts.Ohm and temp and dry burn I don't think so cause I keep it juiced and 're drop when I feel that ima get a cotton hit..... Man idk I've tryd different wics first jap cotton than some Angel hair kinda like a silk cotton... Also made sure nothing touching top cap , spaced coils evenly just as I would on a kanthal build..
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Sounds like you're at that point that we all went through with temp limiting... it's growing pains. must like when you were learning to build the first time.
Really getting the single coil before you start messing with dual is really the best way to learn. check your grub nuts too... you want it secure but not too tight, its another one of those 'things'.
I stick with Japanese organic for wick, and for me the hardest part was taking my time.
just keep playing with the nickel it'll get rhythmic.
You'll get it straight, nickel is a pain in the ass at first.
Really getting the single coil before you start messing with dual is really the best way to learn. check your grub nuts too... you want it secure but not too tight, its another one of those 'things'.
I stick with Japanese organic for wick, and for me the hardest part was taking my time.
just keep playing with the nickel it'll get rhythmic.
You'll get it straight, nickel is a pain in the ass at first.
Last edited:
Lol yes.... I have a sigelei v2 elite sub tank work awesome but dam I wanna get into nickel builds for rdas but it keeps kicking my butt lol but thanks for ur help I appreciate it... Il just get some 28g might work out much better
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
A lot of people are also finding success with titanium ...
Can't help you there but I'm sure There's a thread on here or maybe someone that knows will chime in.
CurlyxCracker
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
I prefer titanium to ni200. Contact coils work, flavor and clouds.
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Tried it and it didn't go so well.... But im giving it another shot, I have some 26,28 and 24 on order
CurlyxCracker
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
26 gauge titanium for dual coils is nice. Do you have a mod with ti mode? If not you have to set it to a higher or lower temp (don't remember which) , like significantly..
Pulse coil on mech or something that will fire that low, VERY quick pulses to work out hotspots, if it turns white you've gone to far
Pulse coil on mech or something that will fire that low, VERY quick pulses to work out hotspots, if it turns white you've gone to far