SMALLER BUILDS....................

[John Vezirian]

Hey there folks, hope everyone had a great weekend...

Spent mine tinkering with the toys and came up with some new builds, this time instead of my usual big monster combinations, I went in the direction of more hand held size, and would love to see other peoples combinations...

• KANGER NANO ON A WISMEC CONTROL HEAD ON A SMOK MAGNETO III WITH A 22MM GLASS DRIP TIP
• UD ZYPHERUS ON THE SAME CONTROL HEAD ON THE MAGNETO III

 

[John Vezirian]

• SMOWELL 50 WATT MOD WITH BLACK FOGGER V4 ON A 22MM BLACK FINNED HEAT SINK AND 22MM HURRICANE DRIP TIP

 

[John Vezirian]

Well this is not a small mod, but I received my Ephro Big Buddha Evil Eye today and the matching Mars mod, I searched high and low for the blue mod, seems folks want to only sell the silver and black. Actually went directly to the source EPHRO and got them to sell me one, but at the last min a trusted source on Ebay came through with the one and only one he had, brand new in the box for $30.00 for the mod, $30.00 for the atty......

 

[Fishman1704]

Either that or he likes the way it looks when in his pocket, especially when out picking up girls.

 

[bondo]

Hey there folks, hope everyone had a great weekend...

Spent mine tinkering with the toys and came up with some new builds, this time instead of my usual big monster combinations, I went in the direction of more hand held size, and would love to see other peoples combinations...

• KANGER NANO ON A WISMEC CONTROL HEAD ON A SMOK MAGNETO III WITH A 22MM GLASS DRIP TIPView attachment 28594
• UD ZYPHERUS ON THE SAME CONTROL HEAD ON THE MAGNETO III

View attachment 28595

If you want small and stealthy you can't go wrong with 18350 and low profile rda.
4nine/derringer next to 18650 gp/nucleus.


That blue Mars is pretty sexi.

Either that or he likes the way it looks when in his pocket, especially when out picking up girls.

26650 for this...

 

[John Vezirian]

did some smaller builds last night, my (1) Le Petit Gros with Doge V3 is the smallest yet, also a (2) Le Petit Gros with Velocity RDA, just under 3.3" long, did the (3) Le Petite with and Aeolus and glass drip, and Wismec El Grande with the 18650 section out, using 18350 battery it come in just under 3" long, think I will get their "bambino" RDA, then it will come in well under 3"...

 

[John Vezirian]

Now I need to find a RBA/RTA 22mm that uses pre-made OCC coils, that is short...

 

[John Vezirian]

Oh and I finished my "Light Saber" LMAO........

Received the blue glass tip in the mail last night...

 

[John Vezirian]

Yeah I think I cornered the market on them...lol.. The have a 510 connection but they are also available in the big bore opening, I like the look, but they really vape nice, they have a bit of a cooling effect, and I thing kind of condense the vape when it hits the tube (glass drip), I can take two three good puffs on them and they do not heat up like some metal ones.

Thanks on the micro compliment, I just took the glass tip off the Le Petit Aeolus, and pt this wide bore stainless I found in my parts box, going to keep it that way, hell I think it looks much much better...

 

[John Vezirian]

Also got a Wismec Venti Kit from Heavens Gifts, this thing is the bomb... and had a 22mmx38mm glass tip for it...



Oh and I think my Perseus looks good on it too...... And damn it vapes freaking great...

 

[John Vezirian]

The blue rig consist of an EPHRO Mars Mod in Blue, took me forever to find it, a blue Big Buddha, Blue Stainless Steel heat sink between the mod and the tank and the blue tip, the tip is 22mmx24mm, the Buddha is 30mm diameter, the sink is 22mm dia, the mod is 30mm diameter

 

[John Vezirian]

Oh ant it is 7/30 watt if that is what you were asking

 

[John Vezirian]

actually 35 watt

 

[John Vezirian]

Have not seen those... care to share a pic or link

 

[John Vezirian]

Well I fired up my Wismec Venti... Damn it is clean, nice looking and vapes really well, this is th 1.0 ohm coil in it...

https://www.dropbox.com/s/wn8vhnife3ce3wi/IMG_0465.MOV?dl=0

 

[sahid_ibn]

Can you help me pls ??
I am mostly using SnowWolf with RDAs and vaping high VG juices. And got the Venti as a pocket driver, but in a vape more than 2 sec with .5 CLR head, it gives damn dry hit !!! Any solution pls??

 

[John Vezirian]

On my Venti I am usually running a 50/50 mix and or 60/40, I have run 40/60 PG/VG, not much higher, I can say presoak the coil, you can even take a fine pin and poke the wick a bit, kind of rough it up a bit, they can get kind of non absorbative when they are packaged a long time, it has helped me when going to more VG, do not poke all the way through...

 

[sahid_ibn]

On my Venti I am usually running a 50/50 mix and or 60/40, I have run 40/60 PG/VG, not much higher, I can say presoak the coil, you can even take a fine pin and poke the wick a bit, kind of rough it up a bit, they can get kind of non absorbative when they are packaged a long time, it has helped me when going to more VG, do not poke all the way through...

Thanks John, will try this. If I am not satisfied with this solution, should I try any 30mm RDA/tank/Buddha or anything? Sorry, I am not that experienced

 

[John Vezirian]

You could probably use a Big Buddha, I have one on a ephro mod, it should work on the venti and fit nicely
[/URL] [/IMG]

 

[sahid_ibn]

thnx again Jhon
will get back to you again for further suggesions

 

[Fishman1704]

Drop your wattage. You only need to be vaping at 25 to 35 watts on your .5 build. If you're dry hitting in 2 seconds, you have to be blasting way too much power at your atty. If you have the 200 watt SnowWolf, you will most likely never, ever, ever need to use it all. And unless you're running a dual coil clapton or a big 22 gauge build that might take a second or two to ramp up, I don't even see the need for half of that, or less.

 

[John Vezirian]

Agreed... Most of my builds are smaller .5 ohm, some .3 Ohm, lots up near 1.0, have several Kangers and such with 1.0 and .5 coils and most of the time I run at 15 to 20 watts, also depends on the e-juice, I have a few that really taste better at 30 watts, but I do have one build on a Goliath, (4) 24ga Coils and I run that at 75 watts, but that is my room fogger.... LOL