SMOK TF-RTA G4 Tank With Top Filling Design Silver
E
Stainless steel
PACKAGE CONTENTS
G4 Edition
1*TF-RTA Tank(24.5mm)
1*TF-RTA G4 Deck(Pre-installed)
1*Gross Point Screwdriver for G4 Deck
1*Replacement Glass Tube
1*SMOK Vape Band
1*User Manual
Spare Parts
FEATURE
Super big deck-off-base design
With 16mm in diameter, the deck space has increased by 30 percent (compared with the TF-RCA deck) and be more convenient to build.
G4 deck & G2 Deck
Initial available in 2 decks, and more will come soon!
TF-RTA G4 Deck
Authentic quad coil design,16mm big build deck,0.14ohm pre-installed
TF-RTA G2 Deck
Dual post velocity style
16mm big build deck,0.45ohm pre-installed
Hidden sealing ring and innovative juice flow control system
For clearomizer or rebuildable atomizer, no leaking is a top-priority task. TF-RTA has more compact body and excellent sealing performance by using hidden sealing ring. Along with the innovative juice flow control system, you can close the juice flow slots before filling or replacing deck to prevent leaking.
Patented swivel top cap design
TFV4 classic swivel-cap design makes top-filling as easy as it gets.
Double-layered drip tip
The drip tip with double-layered structure has been improved on the inner layer of glass to avoid scalding.
Adjustable airflow system
With four large air slots at the base
HOW TO BUILD THE RTA(G4)
1.Before starting make sure your hands are clean.
2.Taking the TF-RTA G4 deck apart.
3.Installing the pre-wrapped coil. Insert one end of your coil into the up-side screw, and the other end into the down-side screw.
4.Positioning and cutting the exceeding ends of wire off. Make sure the coil is fixed and lined up with the air hole, and also make sure the coil is NOT touching the deck. Then cut the exceeding ends of wire off.
5.Cutting a strip of cotton and make sure it's just larger than the coil you built. 6.Inserting the cotton, and placing it in the middle.
7.Cutting the wick at an angle and make sure it's not too short and not too long.
8.Wet the coil with your e-liquid and adjust the wick.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.
- See more at: http://www.angelcigs.com/smok-tf-rt...gn-silver-authentic.html#sthash.F9mQEs9j.dpuf
E
- HEIGHT: 65MM
WIDTH: 24.5MM
CAPACITY:4.5ML
WEIGHT:80g
- 510
Stainless steel
PACKAGE CONTENTS
G4 Edition
1*TF-RTA Tank(24.5mm)
1*TF-RTA G4 Deck(Pre-installed)
1*Gross Point Screwdriver for G4 Deck
1*Replacement Glass Tube
1*SMOK Vape Band
1*User Manual
Spare Parts
FEATURE
Super big deck-off-base design
With 16mm in diameter, the deck space has increased by 30 percent (compared with the TF-RCA deck) and be more convenient to build.
G4 deck & G2 Deck
Initial available in 2 decks, and more will come soon!
TF-RTA G4 Deck
Authentic quad coil design,16mm big build deck,0.14ohm pre-installed
TF-RTA G2 Deck
Dual post velocity style
16mm big build deck,0.45ohm pre-installed
Hidden sealing ring and innovative juice flow control system
For clearomizer or rebuildable atomizer, no leaking is a top-priority task. TF-RTA has more compact body and excellent sealing performance by using hidden sealing ring. Along with the innovative juice flow control system, you can close the juice flow slots before filling or replacing deck to prevent leaking.
Patented swivel top cap design
TFV4 classic swivel-cap design makes top-filling as easy as it gets.
Double-layered drip tip
The drip tip with double-layered structure has been improved on the inner layer of glass to avoid scalding.
Adjustable airflow system
With four large air slots at the base
HOW TO BUILD THE RTA(G4)
1.Before starting make sure your hands are clean.
2.Taking the TF-RTA G4 deck apart.
3.Installing the pre-wrapped coil. Insert one end of your coil into the up-side screw, and the other end into the down-side screw.
4.Positioning and cutting the exceeding ends of wire off. Make sure the coil is fixed and lined up with the air hole, and also make sure the coil is NOT touching the deck. Then cut the exceeding ends of wire off.
5.Cutting a strip of cotton and make sure it's just larger than the coil you built. 6.Inserting the cotton, and placing it in the middle.
7.Cutting the wick at an angle and make sure it's not too short and not too long.
8.Wet the coil with your e-liquid and adjust the wick.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.
- See more at: http://www.angelcigs.com/smok-tf-rt...gn-silver-authentic.html#sthash.F9mQEs9j.dpuf