So I basically started vaping with a KangerTech Subtank and a simple KangerTech box, after that I moved on to Fuchai-200w with temp control and a smok tfv4 tank which is what I bought a few days ago, the guy at the shop told me to try vaping with the temp control but the coil thats on the tank is a smok TF- Q4 which i suppose is Kanthal. I still get smoke when I run the device on TC Ni but I dont think im doing the right thing. I just ordered a build your coil kit with Titanium wire and I'm gonna try building from there. I also ordered a dripper so I can vape while making the most out of my temp control and my titanium wires. I have an app which calculates my resistance and how many wraps I should have but my plan is to set the ohms to 0.15 and 2mm diameter dual coil with 6 wraps on each coil. Thank you
Become a Patron!
Temp Control
- Thread starter kayno100
- Start date
So, what is your question?I just want to make sure if all the information I provided was correct?
Well, you cannot use the TF-Q4 in TC mode, due to the coil being made of Kanthal wire. See the following for more information on the heads available/produced by Smok http://www.smoktech.com/atomizer/tfv4-big-family.
Regarding the Ti wire coil(s), it will depend on the gauge the wire has, in order to have the wraps calculated. However, you should go with at least 2.5mm ID for your coil(s), for RDAs, I usually go with a 3mm ID.
Regarding the Ti wire coil(s), it will depend on the gauge the wire has, in order to have the wraps calculated. However, you should go with at least 2.5mm ID for your coil(s), for RDAs, I usually go with a 3mm ID.
Thank you very much!