Tesla stealth 70 watt atomizer short on all of my atomizers is there a way to fix it??????

[Fuckingproblems]

I bought it from a friend it was decent and needed a new mod so I used it for a little under a week and it quit now with every tank (atomizer) I put on it it will only say atomizer short and I know there isn't a short in my tanks as they work fine on all of his other mods so is there a way to fix this permanently??

 

[KingPin!]

Probably a lose wire inside the mod if you have ruled out the atomiser

Have you had any major juice leaks that might have found thier way inside the mod?

 

[Fuckingproblems]

No

Probably a lose wire inside the mod if you have ruled out the atomiser

Have you had any major juice leaks that might have found thier way inside the mod?

No but I spent 3 hours looking and searching so I took the pin out of my tanks cleaned them then lossend my pin.in the mod cleaned it then tightened it all the way down after that I took my coil apart and made sure my ground lead was connected put it back together then it started working again but just in case I do need to take it apart eventually do you know how YouTube didn't help at all

 

[KingPin!]

For now if it’s working great stick with it stripping down and possibly soldering requires a level of skill practising on your mod as a first go isn’t advisable maybe look up that first get some practise in on something that doesn’t matter

I don’t know much about your mod sorry maybe someone else will chime in for you

 

[Fuckingproblems]

For now if it’s working great stick with it stripping down and possibly soldering requires a level of skill practising on your mod as a first go isn’t advisable maybe look up that first get some practise in on something that doesn’t matter

I don’t know much about your mod sorry maybe someone else will chime in for you

Thx and I have practice on soldering from highschool we had robotics team and I always done soldering and a little programming but since graduation I have to do my own stuff lol

But I'll be waiting on the next person

 

[KingPin!]

Ahh in that case you’ll be fine although quickly looking up the pics for it looks like it’s a sealed unit unless you can see screws to enable you to remove the casing ...there’s normally two wires soldered to the connection

 

[Fuckingproblems]

Ahh in that case you’ll be fine although quickly looking up the pics for it looks like it’s a sealed unit unless you can see screws to enable you to remove the casing ...there’s normally two wires soldered to the connection

Thx

 

[KingPin!]

If you figure out how to dismantle post some pics up will always handy for others in the future as well