Become a Patron!
TFV12 BIG BABY PRINCE leakage！！！！
- Thread starter SmithDNAL
- Start date
-
- Tags
- smok tfv 8 big baby
50W，sometimes 40W or higher
May not be burning off enough juice depending on your coil rating. Tank could be defective where the coil seats. Hard to know really.
Does it leak just stitting or when you use it, or both..??
Try first screwing the coil into the chimney. Otherwise, you may not be getting a tight enough connection on top.
If it is the coils, many other brands fit the Smok baby tanks- and tend to have better qc. Vaporesso GT coils are good, and include mesh and ceramic options. GeekVape coils are not bad either.
Make sure airflow holes are closed when filling, them flip the tank over and back before reopening. Will help create vacuum in the tank to keep the liquid inside.
If it is the coils, many other brands fit the Smok baby tanks- and tend to have better qc. Vaporesso GT coils are good, and include mesh and ceramic options. GeekVape coils are not bad either.
Make sure airflow holes are closed when filling, them flip the tank over and back before reopening. Will help create vacuum in the tank to keep the liquid inside.
Maybe you are right, now I have changed an RDA. Ammit RDA works very well, and I don't need to worry about the explosion.I had the same problem, every coil I put in mine leaked, didn't matter what I did (and I had it cranked up on 120)....solved my problem by ordering the RBA deck, hasn't leaked a drop since.
Thank you for your answer. I tried to tighten all the accessories and it still leaked. I guess it should be that the cotton of the SMOK coil is of poor quality and it can't lock the e-juice. I guess... maybe
Yes，both. Thank you for your answer. I guess the cause of the problem is the coil of SMOK. I am planning to change the coil of other brands. What do you recommend?