The New 200w Istick

[raymo2u]

Ive seen this here and there and the latest Isticks seem to be much better quality compared to their past renditions, hopefully this will follow the trend. It uses replaceable 18650's which Im pretty happy about. Can anyone else chime in about size in comparison to other mods or anything else?

Istick 200w Specs:
The newly-released iStick TC200W MOD by Eleaf, powered by three 18650 batteries, supports VW/TC(Ni/Ti/SS/TCR) modes. It looks fashionable with the unique design of flip-open battery cover and the innovative streamlined shape. With Max output 200W, this MOD brings huge vapor.

Parameters
Size: 57 x 37 x 84mm
Cell type: high-rate 18650 cells
(Discharge current should be above 25A, for example, Sony VTC4)
Output mode: VW/TC(Ni/Ti/SS/TCR-M1,M2,M3) mode
Output wattage: 1-200W
Resistance range: 0.05-1.5ohm (TC modes);0.1-3.5ohm (VW mode)
Temperature range: 100－315℃/200－600℉ (TC modes)
Thread type: 510 thread
Color: Black, Grey, White

iStick TC200W comes with
1 x Eleaf iStick TC200W Mod (without battery cell)
1 x micro USB cable
1 x Manual
Simple packing. Customary packing from the factory, the packing is subject to change without notice.

iStick 200W TC Features
1. 200W VW/TC Box MOD
2. Switchable TC(Ni/Ti/SS/TCR)/VW modes
3. Upgradable firmware
4. Powered by three 18650 cells
5. Innovative Flip-open Battery Cover
6. Unique Fashionable Looking with 3 colors
7. 510 Spring Connector
8. Dual Circuit Protection
9. Reverse Polarity Protection

Power on/off: unlock the battery cover on the bottom of the device and install three high-rate 18650 cells correctly; press the fire button five times in quick succession to turn it on/off.
Vaping: long press the fire button to take a puff.
Switch display orientation: keep pressing left and right button simultaneously for two seconds when the device is powered off, the screen display will rotate 180 degrees.
Shift between VW/TC mode: long press the mode button to shift modes.

Istick 200w LINK

 

[ej1024]

Does it remind you of ur octagon box mod?


VAPE IT

 

[raymo2u]

Does it remind you of ur octagon box mod?


VAPE IT

From its pics it looks similar to the RX style

 

[ej1024]

From its pics it looks similar to the RX style

They should've put the 510 in the middle

 

[DevAuto]

It looks too big to hold comfortably, but pics don't always tell the whole story either... Guess I just need to hold one to figure it out for sure ...

 

[Jimi D]

Was really interested in this. But I really want the Kangside 200 3x 18650 with the Yihi chip.

 

[Markw4mms]

Thanks for sharing! It's good to see ILeaf upping their game now. I think their quality issues might be fixed from what I've heard. Also, it's good to see them moving away from all captive battery mods, which I hate.

 

[raymo2u]

The only thing I can complain about is the resistance range but thats always something I complain about...Im wondering if the batteries are in parallel or series also.

 

[Jimi D]

Thanks for sharing! It's good to see ILeaf upping their game now. I think their quality issues might be fixed from what I've heard. Also, it's good to see them moving away from all captive battery mods, which I hate.

I've been using the iStick 100 since it was first released. Best 34 bucks I ever spent. Saved a few bucks from good ol VU !

 

[Markw4mms]

The only thing I can complain about is the resistance range but thats always something I complain about...Im wondering if the batteries are in parallel or series also.

I seem to remember another write up on this saying it's a series box.

 

[raymo2u]

I've been using the iStick 100 since it was first released. Best 34 bucks I ever spent. Saved a few bucks from good ol VU !

Im inpatiently waiting for my Istick100wTC to come in, I got it from BPROSEK....Ive loved the design since I saw it and I finally caved in getting one!

 

[Markw4mms]

Im inpatiently waiting for my Istick100wTC to come in, I got it from BPROSEK....Ive loved the design since I saw it and I finally caved in getting one!

I'm with you on that one. I really like the form factor of that mod, and I haven't really heard anything bad about it so far.

 

[Jimi D]

Im inpatiently waiting for my Istick100wTC to come in, I got it from BPROSEK....Ive loved the design since I saw it and I finally caved in getting one!

I'll probably get one too. Shit, I have so many tanks and RDA's. Wouldn't hurt to have another mod. Especially if its parallel. It's a smoother vape.

 

[raymo2u]

I'm with you on that one. I really like the form factor of that mod, and I haven't really heard anything bad about it so far.

Thats because there's no cheapo lipo inside this time

 

[raymo2u]

I'll probably get one too. Shit, I have so many tanks and RDA's. Wouldn't hurt to have another mod. Especially if its parallel. It's a smoother vape.

Looks to be Series bud

 

[Jimi D]

Looks to be Series bud

NOOOOOoooo !!

 

[raymo2u]

NOOOOOoooo !!

I added pics I found in the OP...Atleast the 510 is almost Centered..thats a nice feature.

 

[Zamazam]

I seem to remember another write up on this saying it's a series box.

it is. Needs the 12.6V to get to 200W safely.

 

[raymo2u]

Its got a real smiley face for its buttons and usb!

 

[Jimi D]

it is. Needs the 12.6V to get to 200W safely.

Makes sense. I'll live Lol

 

[Jim_MDP]

From its pics it looks similar to the RX style

No it doesn't, and you're like the third I've read say that.
You're all wrong... now, cut it out.



Reuleaux means three circles within a triangle. That's the shape's definition.

What this does remind me of is that triple 18650 DNA200 mod with the 3D printed enclosure in neon colors. More or less "side-by-side" cell arrangement. And similar "unusual" grip to hit the fire button.
I can't recall the name though.

 

[Zamazam]

From its pics it looks similar to the RX style

Yea, a squashed triangle.

 

[raymo2u]

No it doesn't, and you're like the third I've read say that.
You're all wrong... now, cut it out.



Reuleaux means three circles within a triangle. That's the shape's definition.

What this does remind me of is that triple 18650 DNA200 mod with the 3D printed enclosure in neon colors. More or less "side-by-side" cell arrangement. And similar "unusual" grip to hit the fire button.
I can't recall the name though.

Its rounded and triangly, thats my description of the RX...this fits that same description

 

[Jim_MDP]

Yea, a squashed triangle.

Peckerhead... cut it out.

 

[Jim_MDP]

Its rounded and triangly, thats my description of the RX...this fits that same description

You too.

 

[raymo2u]

You too.

I own a Tres Equis so I cant say I dont like the form...Im just not a fan of the RX....maybe if it had Hohm Wrecker/Snow Wolf Specs then I would but for now it looks and is as useful to me as one of those triangles from that Hammer/Block game..

(Hint: Its a Blue one )

 

[Jim_MDP]

Fucking peasants...

https://en.wikipedia.org/wiki/Reuleaux_triangle



I'll have to stop using the "3 circles within a triangle" as that's just a variant application.

 

[Zamazam]

Its rounded and triangly, thats my description of the RX...this fits that same description

Yep, a kinda squished acute triangle.

 

[raymo2u]

Yep, a kinda squished acute triangle.

Like a Triangle made of silly putty, after 2 minutes of sitting (I dont think Jim D is happy with us)

 

[Jim_MDP]

I own a Tres Equis so I cant say I dont like the form...Im just not a fan of the RX....maybe if it had Hohm Wrecker/Snow Wolf Specs then I would

Yeah, I understand that for your uses.
It has inherent limitations... being cheap and all.

There are both YiHi and another upcoming DNA200 version though.
The shape really is efficient and comfortable.

 

[raymo2u]

Yeah, I understand that for your uses.
It has inherent limitations... being cheap and all.

There are both YiHi and another upcoming DNA200 version though.
The shape really is efficient and comfortable.

We are just picking bud, dont let it get to you!
My favorite mod is the Hohm Wrecker G2...and trust me I shit on that box as well for its looks

 

[ej1024]

Looks like a blueberry muffin


VAPE IT

 

[Zamazam]

Yeah, I understand that for your uses.
It has inherent limitations... being cheap and all.

There are both YiHi and another upcoming DNA200 version though.
The shape really is efficient and comfortable.

I'd be interested in either the DNA200 or the YiHi.

 

[Zamazam]

Looks like a blueberry muffin


VAPE IT

Someone's hungry.....

 

[ej1024]

Don't mind
JIM JIM JIM he's a certified
GOP


VAPE IT

 

[ej1024]

Put a DNA chip sell it 59.99 I will buy 2


VAPE IT

 

[Jim_MDP]

We are just picking bud, dont let it get to you!
My favorite mod is the Hohm Wrecker G2...and trust me I shit on that box as well for its looks

Aw fuck no... I've got my tongue firmly planted in cheek. No worries.



Will you get the new HohmTech single? Any AnyWireTC bugs getting quashed?

 

[Jim_MDP]

Don't mind
JIM JIM JIM he's a certified
GOP


VAPE IT

Uh... I'm not that Jim.

 

[raymo2u]

Aw fuck no... I've got my tongue firmly planted in cheek. No worries.



Will you get the new HohmTech single? Any AnyWireTC bugs getting quashed?

Nope Unless they come out with a even more heavy duty Box Im not buying...I love the G2 for its specs, its power/accuracy, and its All metal TC (I dont see how others have an issue with the TC)

 

[ej1024]

Uh... I'm not that Jim.

Ah shit!!
Mah bad!

 

[Jim_MDP]

..., and its All metal TC (I dont see how others have an issue with the TC)

You've posted that K & NiCr TC work as advertised. Amazing in itself.

I've read elsewhere that it's iffy. Not Kanger level dodgy, but still.
And promo copy says that the upcoming TC is "new and improved".

So I thought I'd ask. Either way... it's certainly no Assholio.

 

[Jim_MDP]

Ah shit!!
Mah bad!

S'all cool... you spend too much time in "Say it Here".

 

[raymo2u]

You've posted that K & NiCr TC work as advertised. Amazing in itself.

I've read elsewhere that it's iffy. Not Kanger level dodgy, but still.
And promo copy says that the upcoming TC is "new and improved".

So I thought I'd ask. Either way... it's certainly no Assholio.

Ive posted a quick tut to get it dialed in, PhilB also posted a follow up video stating that he didnt know how to use it and since the first video he has had it working well. Most people are still only tieing to the first video as the only impression on the device...The newest update makes it even most stable and smooth.

 

[Condensation]

Here's an up close screenshot from a review someone did on YouTube comparing the RX shape to the Istick 200w.

 

[Jim_MDP]

Looks narrower than I feared, shouldn't be too funky to reach the fire button.

No one remembers the name of that DNA mod I mentioned?

 

[raymo2u]

It actually looks very comfy...

 

[HDMontana]

I might have to get one with a silicone case. If case doesn't cover battery door. Taking out batteries will be easy, such as it is on the cuboid. Hope this mod gets good reviews.

HD

 

[HDMontana]

Got my istick 200, from eccigity, in the mail today. Finish is nice. I had charged up 3 lg he2s that I hadn't used yet. Still waiting on a trio of lg hg2s that I ordered. Threw on a Boreas, got setting where I wanted and started vaping. I don't have an rx200 to compare to, but I like the way it feels in the hand. My thumb crosses the fire button and with a slight press, the mod fires. Not as heavy as I thought it might be. Battery door seems solid. I need to use it for a few days to get a good impression. It will probably get used at home and on road trips. Grey with black window and silver buttons looks nice.

HD

 

[DevAuto]

Glad to hear it feels good to hold. Never can tell just from a picture!

 

[heateris]

I got a black istick 200w this weekend. I like it. Very similar to the rx200, but I like it better. It's a tad lighter, a bit more pocket friendly, doesn't seem to get as hot, the 510 seems a bit better, easier to hold/fire, and cheaper. $33.xx from 101vape.


Sent from my iPhone using Tapatalk