Hi Vaping Underground members, In this review i take a look at the Aeglos P1 Pod Mod Kit from Uwell. The Uwell Aeglos P1 Pod Mod Kit was supplied for the purpose of this review by Sourcemore.
Uwell Aeglos P1 Kit 80W Pod Mod Kit
Introduction
When Uwell released the original Crown sub-ohm Tank many considered it the tank to judge all others by but then they seemed to have a sketchy couple of years before the release of the Caliburn which once again saw Uwell much talked about but this time they followed the Caliburn with many well received products although I must admit I personally have not used many!
The Aeglos P1 Pod Mod combines a tubular form factor with classic C-frame allowing for a pull off spine for battery installation. It's a power only simple device which has 2 different lock features and smart coil recognition to restrict the power dependant on the coils resistance. With a type C USB connection, 2A charge rate and coming in 5 different colour options lets check out the Aeglos PI Pod Mod!
_________________________________________________________________________
In The Box
Contents:
1* Aeglos P1 Device With 4ml Pod (2ml TPD)
1* FeCrAI UN2 Meshed-H 0.2ohm Aeglos P1 Coil(pre-installed, DTL)
1* FeCrAI UN2 Meshed-H 0.6ohm Aeglos P1 Coil(RDL + MTL)
1* Pack of O-rings
1* User Manual
_________________________________________________________________________
Aesthetics and Ergonomics
The Aeglos P1 came in cardboard box packaging with outer cardboard sleeve with a raised picture on the front and contents etc on the reverse. The device has that Drag X form factor but is combined with a C-frame allowing the Leather covered spine to be removed for battery installation. A combination of Zinc Alloy and Aluminium is used for it's construction and the colour choice refers to the colour of the Leather on the spine, I received the Olive Green, the options are Wine Red, Dark Blue, Olive Green, Reddish Brown or Saddle Tan.
The flattened face has a slightly protruding large square fire button top followed by a colour screen, underneath the screen we have a horizontal navigational rocker followed by a Type C USB port. Embossed onto one side of the Leather we have "AEGLOS" and on the opposite side "UWELL". The base is featureless then moving up top we have a cylindrical collar with airflow slot either side, this collar is the bay for the tinted pod with integrated mouthpiece to be installed.
The curved spine and compact size allows the device to feel great in the hand! Even when vigorously shaking the device we have no rattle whatsoever, it's a nice looking, well made device!
_________________________________________________________________________
Aeglos Pod Mod Specs and Features:
Size: 122* 29* 34mm
Material: Zinc alloy & Aluminium Alloy & PCTG & leather
Battery: single 18650 battery(not included)
Wattage: 5-80W
Screen: 0.96 inch TFT color display
Charging: 5V/2A
Capacity: 4ml (2ml TPD)
Resistance: FeCrAl UN2 Meshed-H 0.2ohm Aeglos P1 Coil(45-52W)
FeCrAl UN2 Meshed-H 0.6ohm Aeglos P1 Coil(23-27W)
Internal chipset with multi protection
Airflow: Adjustable
Pro-FOCS flavour technology
Magnetic pod connection
Colour: Wine Red, Dark Blue, Olive Green, Reddish Brown, Saddle Tan
_________________________________________________________________________
What You Receive?
Actually not a lot! The device comes with a pre-installed pod which in turn has a pre-installed 0.2ohm mesh coil installed and you also receive a 0.6ohm mesh coil. You then receive some spare O-rings for those coil heads and a manual and that's it! You don't even get a USB cable which fair enough most would probably already have a Type C to type 2 cable and also most would always charge externally but if you have a device with Type C connection and you are advertising 2A quick charging how about popping a cable inside the box!
_________________________________________________________________________
The Pod
The Pod for the Aeglos P1 is rounded, tinted and one complete moulding including integrated mouthpiece. Most of the pod protrudes out of the device for good visibility of your juice so no issues there.
Looking at it's circular base we have 3 evenly placed strong magnets and a silicone flap with fill port bung which stays attached when lifted. When the Silicone is lifted a generous fill port is exposed so most nozzles can be used for a quick, mess free fill, the standard pod holds 4ml of juice while of course the TPD pod holds 2ml.
At the base of the pod we have two protruding sections facing each other which will allow for airflow adjustment when turned against the airflow slots on the collar of the device.
_________________________________________________________________________
Fitting The Pod
The Pod Bay looks quite different to other bays as it incorporates part of the condensation recycling system which Uwell have used for a while. We have an upper metallic shelf for the pod magnets to attract to and then the protruding sides of the pod slip down the outside of this shelf to line up on the same level as the airflow slots. We have that central condensation system fixed to the positive plate and to one side the raised negative.
The pod snaps into place and fits very securely, the design means the pod can be fitted without it needing to be lined up a certain way apart from making sure the protruding sections slot down into position, good design!
_________________________________________________________________________
The Coils
With the Aeglos P1 we see the introduction of 2 new Aeglos coil heads which are the 0.2ohm mesh coil head rated between 45w to 52w and the 0.6ohm mesh coil head rated between 23w to 27w. The Aeglos P1 is also compatible with the previous Aeglos coil heads which are the 0.23ohm meshed coil head and the 0.8ohm coil head!
The base of the coil heads like the pod connection inside the device look a little different due to the Uwell condensation recycling system called the "Pro-FOCS flavour technology"!
The coil heads like so many of these pod mod coils just get press fitted into place!
_________________________________________________________________________
Review Continued Below:
Uwell Aeglos P1 Kit 80W Pod Mod Kit
Introduction
When Uwell released the original Crown sub-ohm Tank many considered it the tank to judge all others by but then they seemed to have a sketchy couple of years before the release of the Caliburn which once again saw Uwell much talked about but this time they followed the Caliburn with many well received products although I must admit I personally have not used many!
The Aeglos P1 Pod Mod combines a tubular form factor with classic C-frame allowing for a pull off spine for battery installation. It's a power only simple device which has 2 different lock features and smart coil recognition to restrict the power dependant on the coils resistance. With a type C USB connection, 2A charge rate and coming in 5 different colour options lets check out the Aeglos PI Pod Mod!
_________________________________________________________________________
In The Box
Contents:
1* Aeglos P1 Device With 4ml Pod (2ml TPD)
1* FeCrAI UN2 Meshed-H 0.2ohm Aeglos P1 Coil(pre-installed, DTL)
1* FeCrAI UN2 Meshed-H 0.6ohm Aeglos P1 Coil(RDL + MTL)
1* Pack of O-rings
1* User Manual
_________________________________________________________________________
Aesthetics and Ergonomics
The Aeglos P1 came in cardboard box packaging with outer cardboard sleeve with a raised picture on the front and contents etc on the reverse. The device has that Drag X form factor but is combined with a C-frame allowing the Leather covered spine to be removed for battery installation. A combination of Zinc Alloy and Aluminium is used for it's construction and the colour choice refers to the colour of the Leather on the spine, I received the Olive Green, the options are Wine Red, Dark Blue, Olive Green, Reddish Brown or Saddle Tan.
The flattened face has a slightly protruding large square fire button top followed by a colour screen, underneath the screen we have a horizontal navigational rocker followed by a Type C USB port. Embossed onto one side of the Leather we have "AEGLOS" and on the opposite side "UWELL". The base is featureless then moving up top we have a cylindrical collar with airflow slot either side, this collar is the bay for the tinted pod with integrated mouthpiece to be installed.
The curved spine and compact size allows the device to feel great in the hand! Even when vigorously shaking the device we have no rattle whatsoever, it's a nice looking, well made device!
_________________________________________________________________________
Aeglos Pod Mod Specs and Features:
Size: 122* 29* 34mm
Material: Zinc alloy & Aluminium Alloy & PCTG & leather
Battery: single 18650 battery(not included)
Wattage: 5-80W
Screen: 0.96 inch TFT color display
Charging: 5V/2A
Capacity: 4ml (2ml TPD)
Resistance: FeCrAl UN2 Meshed-H 0.2ohm Aeglos P1 Coil(45-52W)
FeCrAl UN2 Meshed-H 0.6ohm Aeglos P1 Coil(23-27W)
Internal chipset with multi protection
Airflow: Adjustable
Pro-FOCS flavour technology
Magnetic pod connection
Colour: Wine Red, Dark Blue, Olive Green, Reddish Brown, Saddle Tan
_________________________________________________________________________
What You Receive?
Actually not a lot! The device comes with a pre-installed pod which in turn has a pre-installed 0.2ohm mesh coil installed and you also receive a 0.6ohm mesh coil. You then receive some spare O-rings for those coil heads and a manual and that's it! You don't even get a USB cable which fair enough most would probably already have a Type C to type 2 cable and also most would always charge externally but if you have a device with Type C connection and you are advertising 2A quick charging how about popping a cable inside the box!
_________________________________________________________________________
The Pod
The Pod for the Aeglos P1 is rounded, tinted and one complete moulding including integrated mouthpiece. Most of the pod protrudes out of the device for good visibility of your juice so no issues there.
Looking at it's circular base we have 3 evenly placed strong magnets and a silicone flap with fill port bung which stays attached when lifted. When the Silicone is lifted a generous fill port is exposed so most nozzles can be used for a quick, mess free fill, the standard pod holds 4ml of juice while of course the TPD pod holds 2ml.
At the base of the pod we have two protruding sections facing each other which will allow for airflow adjustment when turned against the airflow slots on the collar of the device.
_________________________________________________________________________
Fitting The Pod
The Pod Bay looks quite different to other bays as it incorporates part of the condensation recycling system which Uwell have used for a while. We have an upper metallic shelf for the pod magnets to attract to and then the protruding sides of the pod slip down the outside of this shelf to line up on the same level as the airflow slots. We have that central condensation system fixed to the positive plate and to one side the raised negative.
The pod snaps into place and fits very securely, the design means the pod can be fitted without it needing to be lined up a certain way apart from making sure the protruding sections slot down into position, good design!
_________________________________________________________________________
The Coils
With the Aeglos P1 we see the introduction of 2 new Aeglos coil heads which are the 0.2ohm mesh coil head rated between 45w to 52w and the 0.6ohm mesh coil head rated between 23w to 27w. The Aeglos P1 is also compatible with the previous Aeglos coil heads which are the 0.23ohm meshed coil head and the 0.8ohm coil head!
The base of the coil heads like the pod connection inside the device look a little different due to the Uwell condensation recycling system called the "Pro-FOCS flavour technology"!
The coil heads like so many of these pod mod coils just get press fitted into place!
_________________________________________________________________________
Review Continued Below: