Hi Vaping Underground members, In this review i take a look at the Berserker V2 MTL RDA from Vandy Vape. The Berserker V2 MTL RDA was supplied for the purpose of this review by Ariel from Vandy Vape.
http://www.vandyvape.com/atomizer/rda/Be...2-mtl-rda/
Introduction
The Berserker range of RDA's, RTA's and tank have possibly been Vandy Vape's most successful products and here we see the upgrade to the original Berserker MTL RDA and another collaboration with Alex from Vapors MD. Rather than having both inserts and adjustable airflow V2 just has inserts which have also been simplified making it a much more straightforward RDA to use. V2 is much larger being 22mm in diameter compared to the 18mm original version but that extra diameter is all taken up by the double walled sleeve which houses the airflow channel which takes airflow from the side it enters the sleeve right round to the opposite side where it enters the airflow system on the deck, making it as leak resistant than i can imagine possible. The RDA has a deep juice well section meaning the build is sitting in the top reduced dome area of the chamber so in theory giving the Berserker V2 MTL RDA every chance of delivering top-notch flavour, let's have a look!
___________________________________________________________________
In The Box
Contents:
1 * BSKR V2 MTL RDA
1 * Accessory bag which includes:
4 * Airflow inserts
O-rings
Drip tip tip
Grub screws
Allen Key
Screwdriver
Solid 510 pin
2 * Coils (Ni80 0.78ohm)
1 * User Manual
2 * Drip Tip
___________________________________________________________________
Aesthetics
The Berserker V2 MTL RDA came in the usual Silver and Blue cardboard sample packaging minus any paperwork which is normal and will be included with the retail version. I received the Matte Black version which has the same Matte Black finish as previous Berserker atty's and is the colour i always receive. My wife uses the Berserker RTA's all the time so i can 100% vouch for the durability of the finish of at least the Black versions. The colour options are Matte Black, Gun Metal, Stainless Steel and Rainbow, all versions come with a 2 section drip tip, the bottom section has 4 heat sink fins in the colour of choice with an Ultem screw in tip up top. The main body of the sleeve has no logo or branding, in fact all we have is a small shield shape indented section that houses the airflow inlet hole. The top of the sleeve has a series of tapering and steps before eventually giving us a flat protruding surface in which the 510 drip tip can be fitted. Moving to the base the RDA comes pre-installed with a Gold plated BF pin and we also have etched branding and safety marks. The RDA has a very familiar Berserker look to it and is very good build quality.
___________________________________________________________________
Berserker V2 MTL RDA Specs and Features:
Parameters
Length: 24mm
Diameter: 22mm
Capacity: 1.5ml
Thread: 510
Features
1. True MTL experience.
2. Come with various size of airflow, easy and quick to install.
3. Leakproof design.
4. Innovative Dual-shell cap design presents better temperature control and Isolation.
5. Dome and smaller evaporation chamber.
6. Easy coil installation and wicking.
Colours: Matte Black, Gun Metal, Stainless Steel, Rainbow
___________________________________________________________________
The Berserker V2 MTL Various Parts
The RDA consists of a MTL 510 drip tip with heat sink fins and an Ultem tip but the tip can be unscrewed and also included is a Black delrin small tip as well as other options which i will cover in another section. We then have a heavy, thick sleeve section and when looking inside we can see it has 2 walls with the inner wall on the Black version being Silver in colour, this double wall is needed for how the airflow works which i will cover later. The base section is very tall giving the RDA a deep juice well and also will mean once the sleeve is fitted the build will sit in the top section of the chamber. An Insert needs to be slotted into the side of the deck for airflow and we receive 4 inserts each giving different amounts of air. Pre-installed we have a BF pin but a 2 part solid pin is also included and having it in 2 parts makes it adjustable. We also receive spare o-rings, grub screws, Allen key, screwdriver and 2 coils.
___________________________________________________________________
The Coils
You receive 2 coils with full specs given which is a big pro. The coils are Superfine MTL Fused Claptons, Ni80 30ga*2+38ga 6 wraps with a 2.5mm ID and a resistance of 0.78ohm.
___________________________________________________________________
The Drip Tips
I don't think i have included a separate drip tip section before in a review but with the Berserker V2 MTL RDA a lot of options are included and of course you can still opt for one of your own favourite 510 drip tips if you prefer. Pre-installed we have a 2 section drip tip which has 4 heat sink fins and the Ultem tip can be unscrewed, also included is another 2 section drip tip with 3 heat sink fins and a much taller MTL tip which also unscrews. Also in the accessories bag we get a small delrin tip so each of the 2 bottom sections can be used with any of the 3 different screw-in tips. If that wasn't enough options for good measure also included is a tall MTL delrin standard one piece drip tip.
___________________________________________________________________
Review Continued Below:
http://www.vandyvape.com/atomizer/rda/Be...2-mtl-rda/
Introduction
The Berserker range of RDA's, RTA's and tank have possibly been Vandy Vape's most successful products and here we see the upgrade to the original Berserker MTL RDA and another collaboration with Alex from Vapors MD. Rather than having both inserts and adjustable airflow V2 just has inserts which have also been simplified making it a much more straightforward RDA to use. V2 is much larger being 22mm in diameter compared to the 18mm original version but that extra diameter is all taken up by the double walled sleeve which houses the airflow channel which takes airflow from the side it enters the sleeve right round to the opposite side where it enters the airflow system on the deck, making it as leak resistant than i can imagine possible. The RDA has a deep juice well section meaning the build is sitting in the top reduced dome area of the chamber so in theory giving the Berserker V2 MTL RDA every chance of delivering top-notch flavour, let's have a look!
___________________________________________________________________
In The Box
Contents:
1 * BSKR V2 MTL RDA
1 * Accessory bag which includes:
4 * Airflow inserts
O-rings
Drip tip tip
Grub screws
Allen Key
Screwdriver
Solid 510 pin
2 * Coils (Ni80 0.78ohm)
1 * User Manual
2 * Drip Tip
___________________________________________________________________
Aesthetics
The Berserker V2 MTL RDA came in the usual Silver and Blue cardboard sample packaging minus any paperwork which is normal and will be included with the retail version. I received the Matte Black version which has the same Matte Black finish as previous Berserker atty's and is the colour i always receive. My wife uses the Berserker RTA's all the time so i can 100% vouch for the durability of the finish of at least the Black versions. The colour options are Matte Black, Gun Metal, Stainless Steel and Rainbow, all versions come with a 2 section drip tip, the bottom section has 4 heat sink fins in the colour of choice with an Ultem screw in tip up top. The main body of the sleeve has no logo or branding, in fact all we have is a small shield shape indented section that houses the airflow inlet hole. The top of the sleeve has a series of tapering and steps before eventually giving us a flat protruding surface in which the 510 drip tip can be fitted. Moving to the base the RDA comes pre-installed with a Gold plated BF pin and we also have etched branding and safety marks. The RDA has a very familiar Berserker look to it and is very good build quality.
___________________________________________________________________
Berserker V2 MTL RDA Specs and Features:
Parameters
Length: 24mm
Diameter: 22mm
Capacity: 1.5ml
Thread: 510
Features
1. True MTL experience.
2. Come with various size of airflow, easy and quick to install.
3. Leakproof design.
4. Innovative Dual-shell cap design presents better temperature control and Isolation.
5. Dome and smaller evaporation chamber.
6. Easy coil installation and wicking.
Colours: Matte Black, Gun Metal, Stainless Steel, Rainbow
___________________________________________________________________
The Berserker V2 MTL Various Parts
The RDA consists of a MTL 510 drip tip with heat sink fins and an Ultem tip but the tip can be unscrewed and also included is a Black delrin small tip as well as other options which i will cover in another section. We then have a heavy, thick sleeve section and when looking inside we can see it has 2 walls with the inner wall on the Black version being Silver in colour, this double wall is needed for how the airflow works which i will cover later. The base section is very tall giving the RDA a deep juice well and also will mean once the sleeve is fitted the build will sit in the top section of the chamber. An Insert needs to be slotted into the side of the deck for airflow and we receive 4 inserts each giving different amounts of air. Pre-installed we have a BF pin but a 2 part solid pin is also included and having it in 2 parts makes it adjustable. We also receive spare o-rings, grub screws, Allen key, screwdriver and 2 coils.
___________________________________________________________________
The Coils
You receive 2 coils with full specs given which is a big pro. The coils are Superfine MTL Fused Claptons, Ni80 30ga*2+38ga 6 wraps with a 2.5mm ID and a resistance of 0.78ohm.
___________________________________________________________________
The Drip Tips
I don't think i have included a separate drip tip section before in a review but with the Berserker V2 MTL RDA a lot of options are included and of course you can still opt for one of your own favourite 510 drip tips if you prefer. Pre-installed we have a 2 section drip tip which has 4 heat sink fins and the Ultem tip can be unscrewed, also included is another 2 section drip tip with 3 heat sink fins and a much taller MTL tip which also unscrews. Also in the accessories bag we get a small delrin tip so each of the 2 bottom sections can be used with any of the 3 different screw-in tips. If that wasn't enough options for good measure also included is a tall MTL delrin standard one piece drip tip.
___________________________________________________________________
Review Continued Below: