Who uses a unregulated mod with two bats in series ?

[SMOKIE]

If you have a unregulated mod that takes two 18650 batteries in series, what atomizer are you using on it, and at what ohms?

 

[Wabah58]

If you have a unregulated mod that takes two 18650 batteries in series, what atomizer are you using on it, and at what ohms?

I use a Mutation X on my series box, with about a .5 to .6 ohm build. On my parallel boxes I use around .3-.4 Generally speaking you will want a little higher ohm build in series. Now written in stone, but generally

 

[SMOKIE]

I use a Mutation X on my series box, with about a .5 to .6 ohm build. On my parallel boxes I use around .3-.4 Generally speaking you will want a little higher ohm build in series. Now written in stone, but generally

And you use this build with 8.5 volts?

 

[Wabah58]

And you use this build with 8.5 volts?

I usually tell people buying a series box from me to double their ohm from what they were building on parallel build. Then work from there if you want to fine tune for your style.

I just checked Smokie im at .68 ohm right now.

 

[SMOKIE]

I usually tell people buying a series box from me to double their ohm from what they were building on parallel build. Then work from there if you want to fine tune for your style.

I just checked Smokie im at .68 ohm right now.

Just want to make sure that high voltage would be good for such low ohms. Some modders recommend using 4.2 ohms, and above. Just seems kind of high compared to vaping .6 ohms on 50 watts that is 5.4 volts.

 

[SMOKIE]

Received a very nice wooden unregulated box mod today that runs in series on two 18650 bats, and does have a mosfet.

 

[Zamazam]

I use a mosfet Mod I made with batteries in series (VTC5) with a .5 Ohm Dual Coil Dripper (Troll) as my cloud buster rig. Amp Draw is never more than 16.5 amps. As always, I double check my math and build.

 

[Wabah58]

Received a very nice wooden unregulated box mod today that runs in series on two 18650 bats, and does have a mosfet.

Wow, well maybe get some more info from others, everybody different in vaping. You have some pics of that bad boy?

 

[Zamazam]

Received a very nice wooden unregulated box mod today that runs in series on two 18650 bats, and does have a mosfet.

Use an online Ohms law calc to tailor the total output watts. Series boxes are pretty much for RDA's. They will toast any tank coil out there.

 

[Wabah58]

I am terrible at keeping wooden boxes nice, lids always end up warping on me. Takes a lot of waxing i guess to keep them in shape.

 

[SMOKIE]

I use a mosfet Mod I made with batteries in series (VTC5) with a .5 Ohm Dual Coil Dripper (Troll) as my cloud buster rig. Amp Draw is never more than 16.5 amps. As always, I double check my math and build.

Just tried the .6 Herakles tank on it, and it is so hot like vaping at a 100 watts, compared to the 50 I use on it.

 

[Wabah58]

Just tried the .6 Herakles tank on it, and it is so hot like vaping at a 100 watts, compared to the 50 I use on it.

No dripper only Smokie...High VG juice with almost no nic.

 

[SMOKIE]

No dripper only Smokie...High VG juice with almost no nic.

Ha Ha well I do not really use drippers, and high VG is a killer for me. Guess this nice mod I just might have to give back.

 

[Zamazam]

Just tried the .6 Herakles tank on it, and it is so hot like vaping at a 100 watts, compared to the 50 I use on it.

LOL, with fully charged batteries you were vaping at 112 watts! I'm surprised the coil didn't break....

I'm using my Herkales with the 0.2 coil on it on my parallel box and it is warm, nearly hot. Lots of vapor.

 

[SMOKIE]

LOL, with fully charged batteries you were vaping at 112 watts! I'm surprised the coil didn't break....

I'm using my Herkales with the 0.2 coil on it on my parallel box and it is warm, nearly hot. Lots of vapor.

.6 Is meant to go up to 70 watts, and I only hit it once for a split second or so.