The Yocan Loki is a button-activated nectar collector with XTAL tip from Yocan, variable voltage, 650mAh battery, USB-C charging, and zinc + aluminum alloy body. The Yocan Loki is a stylish device with simple, oval lines and flattened sides. It has an equally flat zinc alloy mouthpiece at the top and a button with a LED indicator. The XTAL tip is gold and is a nice little talent for a minimalist device.
The Loki is absolutely portable-it's 5. 3 inches high, 1 inch wide, and half an inch thin. Make it one of the most portable enrichment devices.
The Yocan Loki voltage is set to 3.2V, 3.7V, and 4.2V. At the same time, Loki is equipped with two usage modes, and after selecting the temperature you want, you can choose to use either of the two modes: on-demand mode and session mode.
On-demand mode: on-demand mode only needs to press the button, and it will start heating up, and then you will start smoking e-cigarettes.
Session mode: the session mode can be turned on / off by clicking the button twice. Yocan Loki's session mode keeps the coil hot until it closes automatically after 15 seconds, so you can easily vape without pressing the button.
The Yocan Loki has a 650mAh battery that lasts about 40-50 times, depending on your temperature and the length of a single session. When the battery is exhausted, it can be recharged through the USB-C interface to provide stable power, charging 20 times faster than the outdated mini-USB.
Loki has a newly developed XTAL TIP, the tip whose main body is gold-plated stainless steel, while the actual coil has a ceramic outer layer and a quartz interior. The upgraded Tip has a larger heating area, which means that the amount that can be loaded at a single time is greatly increased. You can immerse the equipment directly in the material, or you can use the tap tool for a cold or hot load.
Like a good old dab, a hot load is definitely more potent, while a “cold” dab or loading and then heating the coils – results in more flavor and less vapor.
The Yocan Loki is equipped with isolated double air paths, and there are 5 air holes at the end of the Tip, leading to the isolated double air paths arranged on the entire side of the equipment. The air path is separated from electronic components-protects you from any impurities that may cause health problems.
The air path is not the longest, but it is enough to cool the steam. At the lowest setting and cooling, load-the steam is absolutely delicious. If you are looking for large and dense steam, use the intermediate setting for heat load. There are simply too many top settings, resulting in very harsh and thick results.
Yocan Loki is not the most feature-rich product, and it is not designed to do so. It is as simple, straightforward, and reasonably priced as all Yocan devices. It works, it does the job-- and it does relatively well-- especially given its $40 price tag. It’s definitely a device I would recommend to start vaping concentrates with.
Get more on Yocan Official website: www.yocan.com
The Loki is absolutely portable-it's 5. 3 inches high, 1 inch wide, and half an inch thin. Make it one of the most portable enrichment devices.
The Yocan Loki voltage is set to 3.2V, 3.7V, and 4.2V. At the same time, Loki is equipped with two usage modes, and after selecting the temperature you want, you can choose to use either of the two modes: on-demand mode and session mode.
On-demand mode: on-demand mode only needs to press the button, and it will start heating up, and then you will start smoking e-cigarettes.
Session mode: the session mode can be turned on / off by clicking the button twice. Yocan Loki's session mode keeps the coil hot until it closes automatically after 15 seconds, so you can easily vape without pressing the button.
The Yocan Loki has a 650mAh battery that lasts about 40-50 times, depending on your temperature and the length of a single session. When the battery is exhausted, it can be recharged through the USB-C interface to provide stable power, charging 20 times faster than the outdated mini-USB.
Loki has a newly developed XTAL TIP, the tip whose main body is gold-plated stainless steel, while the actual coil has a ceramic outer layer and a quartz interior. The upgraded Tip has a larger heating area, which means that the amount that can be loaded at a single time is greatly increased. You can immerse the equipment directly in the material, or you can use the tap tool for a cold or hot load.
Like a good old dab, a hot load is definitely more potent, while a “cold” dab or loading and then heating the coils – results in more flavor and less vapor.
The Yocan Loki is equipped with isolated double air paths, and there are 5 air holes at the end of the Tip, leading to the isolated double air paths arranged on the entire side of the equipment. The air path is separated from electronic components-protects you from any impurities that may cause health problems.
The air path is not the longest, but it is enough to cool the steam. At the lowest setting and cooling, load-the steam is absolutely delicious. If you are looking for large and dense steam, use the intermediate setting for heat load. There are simply too many top settings, resulting in very harsh and thick results.
Yocan Loki is not the most feature-rich product, and it is not designed to do so. It is as simple, straightforward, and reasonably priced as all Yocan devices. It works, it does the job-- and it does relatively well-- especially given its $40 price tag. It’s definitely a device I would recommend to start vaping concentrates with.
Get more on Yocan Official website: www.yocan.com