Become a Patron!
tfv8 rba
- Thread starter kelly1974
- Start date
Lol those batteries are likely 20 amp rewraps but could be as low as 10amp.
What brand are the batts?
What mod are you using?
What brand are the batts?
What mod are you using?
they are called eizfan i am using the rx 200 wild bills said thats the batteries they use and they use rda"s ... what would you recomend for low ohm builds from .5 to .7 would like to build claptin coils .2 or .3 maybe.. right now i am just ordering the rba for 3 bucks a pop already made.
down to .3 possibly
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
I recommend LG HG2 batteries or Samsung 30Q batteries. You can buy them here illumn.com or here liionwholesale.com
Well, the rewrappers have seen that people fall for the 40A trick, so why no go with 60
That's what I use, they don't even get warm at 200w in my wismec mods. I buy 30q mostly because I'm afraid of fake HG2 and they are usually a buck cheaper
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
those 2 sites don't sell fakes
I use both those batteries. don't notice any difference personally
Except they one trusted vendor did get some fakes and then had to replace a bunch of them. They made it right but it happened.those 2 sites don't sell fakes
I use both those batteries. don't notice any difference personally
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
which one was that?
@kelly1974
have a look here: http://vapingunderground.com/threads/moochs-battery-tests.132451/
or here: http://vapingunderground.com/members/mooch.32275/#postings
or simply google : Mooch battery recommendations
have a look here: http://vapingunderground.com/threads/moochs-battery-tests.132451/
or here: http://vapingunderground.com/members/mooch.32275/#postings
or simply google : Mooch battery recommendations
It was IMR batteries
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
cool. so none of the 2 i listed
guys please help!!! i wick my rba up pretty nice and get the coils glowing just right..but im getting hot juice spits and sputters,,,,i think it might be the juice its 70vg 30pg i go out side from the air conditioning and get a few good hit but as soon as the tank warms up i get the problems ,,,sometimes even a pop?????? i normally use 80-20 but the 70-30 was on sale ,thinking about going to 90 vg
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Not the juice. You are just putting too much juice on the coils. Raise the wattage to burn it off and try to juice it a little less
Sent from my SM-G935V using Tapatalk
its not an rda its a rba,,,so any suggestions???
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
So is it a
1) tank you rebuilt (RTA or RDTA)
2) Dripper you rebuilt (RDA)
3) Tank with prebuilt coil?
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Got it. In that case, I'd say throw more wattage at it. Could also be your wicking. IF you have your cotton too tight, it won't wick and you'll get burned taste, If you have it too loose, juice might flood the coil.
The first easy way to go is increase the wattage and fire it while blowing out for a few seconds (this way you can get the excess juice off the coil without having to inhale it. Then when the pop goes away, try to hit ti as normal on the higher wattage