I believe the bottle is soft silicone lucyGood choice -
How's the included bottle?
Good choice -
How's the included bottle?
Yes obviously I’ve nothing to compare but it is a soft silicone. Works well.
Sent from my iPhone using Tapatalk
Yes it is the soft silicon bottle and it's a big one that holds 9 ml.Yes obviously I’ve nothing to compare but it is a soft silicone. Works well.
Sent from my iPhone using Tapatalk
Yes it is the soft silicon bottle and it's a big one that holds 9 ml.
I just pulled mine out of my mail box. It's well made and has a make/break contact inside so you can pocket/purse the mod and not worry about auto-firing. The doors are held on magnet to magnet around the edges and not to the battery. The 510 is spring loaded so your atty will sit flush to the body. A 24 mm atty sits nicely on it with no overhang. It could take a 25 mm if your OCD doesn't freak out hanging over the body edge rounding.
I put a Pulse 24 atty on it built with a pair of 2x28/38 SS316L fused Claptons in it at 0.25 Ohms. I filled up the bottle with some DIY Moose Pie and it squonks nicely. It vapes well and I'm not getting any heat transfer on the button.
Well worth the $40 and I will probably buy some more.
Yeah there are replacements available and with colors. Any vendor who carries the mod should be getting the bottles. I have a couple on backorder from thecloudyvapor.com. I think Vandy Vape didn't anticipate how popular this mod was going to be and short shipped to the vendors.9 ml is fantastic - is anyplace selling extras/replacments?
Sorry about hijacking your thread. You choose a good mod IMHO to begin your journey down rabbit hole of squonking!Finally joined the squonking ranks with the arrival of my pulse mod. So far really liking it with the dead rabbit.
Sent from my iPhone using Tapatalk
Yes, sorry for posting about my order.Finally joined the squonking ranks with the arrival of my pulse mod. So far really liking it with the dead rabbit.
Sent from my iPhone using Tapatalk
Might be a good one for the 5289 ml is fantastic - is anyplace selling extras/replacments?
Might be a good one for the 528
Sent from my SM-G950U using Tapatalk
Sorry about hijacking your thread. You choose a good mod IMHO to begin your journey down rabbit hole of squonking!
Welcome to the squonk hole
Oh yeah, Maybe I'm not quite satisfied.
I may need to lop a little bit off of the feed tube (don yet know the proper term) as it's very soft and a bitch to get it back in the mod without juice all over.
Also, they do make refill bottles so you can fill yours from the top through the 510 where the attie goes so you only have to remove the squonk bottle if you want to clean it
Refil bottle is the way to go fast easy non messyGood to know. Thank you.
Good to know. Thank you.
That's what I used to fill mine. Easy peasy and no mess.Refil bottle is the way to go fast easy non messy
Sent from my SM-G950U using Tapatalk
Sadly, I have six of these refill jobbers but have yet to actually try them out for myself
I would need at least 30 refill bottles to hold all my different recipes.
With the Pulse it's easier to get the bottle on, with the battery removed.
.
From what I have heard, they are not any easier.Yes I'm discovering this. I do wish that the feed tube was made of stiffer tubing.
Also, at least on mine, the battery is a bitch to get in with the 18650 adapter. May need to get a few 20700's and see if they are any better.
From what I have heard, they are not any easier.
But what does help is removing both panels and instead of inserting one end at a time, you can put fingers through the hole in the back to guide the battery in and just slide the whole thing in at once.