PM me if you want a DryPlug... I've got some extras
Is this plug fitted off the SXK boro or the Billet Boro? Thanks!
PM me if you want a DryPlug... I've got some extras
Each was tested on billet boro. I've used a few on SXK with no issues. The boros are identical far as i can tell... But not all were tested with SXK...Is this plug fitted off the SXK boro or the Billet Boro? Thanks!
Hope you get on with it!Yeah I am going to need more time with this thing...
Its a nice vape, but with only an hour with it...not feeling it yet...
I know I can't replicate what I get with my squonks, nature of the devices dictates that...
I'll find my Nirvana with it I am sure...
Not having wicking/juice flow issues...RTAs/RBAs are simple to wick...Flavor is just not there...5 builds into it already...
Maybe I need to try the other Chimney, move away from the 3mm coils and give the 2.5's a fair shake...
Currently have a 3mm 28x2x40 5 wrap N80 fused at 21w and its a decent vape...just a bit muted and dry mouth feel when in my RDAs its just yum
I'll find that balance of AF to coil/height etc. I am searching for... but alas its time for food
Which coil head do you have in yours?Yeah I am going to need more time with this thing...
Its a nice vape, but with only an hour with it...not feeling it yet...
I know I can't replicate what I get with my squonks, nature of the devices dictates that...
I'll find my Nirvana with it I am sure...
Not having wicking/juice flow issues...RTAs/RBAs are simple to wick...Flavor is just not there...5 builds into it already...
Maybe I need to try the other Chimney, move away from the 3mm coils and give the 2.5's a fair shake...
Currently have a 3mm 28x2x40 5 wrap N80 fused at 21w and its a decent vape...just a bit muted and dry mouth feel when in my RDAs its just yum
I'll find that balance of AF to coil/height etc. I am searching for... but alas its time for food
but the bottom left hex screw was over tightened and it stripped immediately when I went to turn it. Any tips on how to get that little bastard out?!
SXK 70W arrived today. Got a 0.6 ohm 316L 28/36 single core clapton in the Exocet clone vaping at 16.5 watts.
Kind of pissed bc I have a matching JMK dome button, but the bottom left hex screw was over tightened and it stripped immediately when I went to turn it. Any tips on how to get that little bastard out?!
This should tide me over until I get my hands on an authentic. Good to be back to the BB fold.
Sent from my SM-G965U using Tapatalk
Oh nvm, its the head of the hex stripped, not the screw itself in the mod...
Oh nvm, its the head of the hex stripped, not the screw itself in the mod...disregard
Dremel and cut in a slot for a slotted screw driver only way I know how
JB weld a toss away allen in its place, then once removed toss both
Thank you both for the replies! It'll probably be a couple of days until I can play around with that. I'll update either way.Sometimes you can use a Torx bit of the proper size to remove an allen-head hex screw.
Otherwise you might try to stretch a rubber band over the end of the correct-sized (and sometimes one size smaller) allen-key and jam it into the hex head of the screw and the rubber will sometimes provide just enough friction to back it out...
Failing that you'll need some reversed-cutting screw-removal drill bits ~1mm dia in order to drill it out without killing the threads in the BB and maybe a dremel (that can be reversed in rotation) on low speed (~500-800 rpm)
Side note, I am thinking we vape very similar in terms of coils etc.
rocking a 26/40 N80 Clapton .67 in the RPG at 19w... wen't with the 40 wrap so it cools a bit faster...its good til I get my wire order in to make other stuffs
Ordered some Kanthal (Yuck) and some 30 and 32 wire for some micro fused/aliens
BOOM SHAKALAKA!
wound up having to use the dremel to turn it into a flathead screw, but I got that bitch out!
Kinda wish I went with stainless for the tip and button set now... guess I'll save that for the authentic when I get it.
Sent from my SM-G965U using Tapatalk
@BrewBear
I posted about how to update the firmware via Escribe and how to obtain and use a temporary connection to the USB data/charging board via the Bonkers thread previously when that topic came up in that thread, two days ago. Maybe you had not seen it?
I am reposting some of that info here for visibility:
Follow up to my previous BB post here:
SXK Vapeshell on FT, $19.90 price shown but $14.95 with MAP code:
https://www.fasttech.com/products/9646076
Evolv 1A Micro-USB Data/Charging Board, $5.99 (coupon code NEWBOARD for 10% off):
https://www.protovapor.com/product/evolv-1a-micro-usb-datacharging-board/
DNA60 Wiring USB module:
https://forum.evolvapor.com/topic/65554-dna60-wiring-usb-module/
and here is a video showing how to use the board:
Hope this helps!
wow, now that is really quite nice; just when you think you are done wanting any accessories for the BilletBox...
Jwraps makes a clear one you could put around the outside... Or set it down on the panels. They're G10 and won't scratch easilyI need to find something for my BB's Butt.
Not all about wraps or cases, but I'd like to add something to the bottom so as to not cause major table rash.
I probably have to add some type of wrap to the table side of the mod.
hmm...
I need to find something for my BB's Butt.
Not all about wraps or cases, but I'd like to add something to the bottom so as to not cause major table rash.
I probably have to add some type of wrap to the table side of the mod.
hmm...
@BrewBear
I posted about how to update the firmware via Escribe and how to obtain and use a temporary connection to the USB data/charging board via the Bonkers thread previously when that topic came up in that thread, two days ago. Maybe you had not seen it?
I am reposting some of that info here for visibility:
Follow up to my previous BB post here:
SXK Vapeshell on FT, $19.90 price shown but $14.95 with MAP code:
https://www.fasttech.com/products/9646076
Evolv 1A Micro-USB Data/Charging Board, $5.99 (coupon code NEWBOARD for 10% off):
https://www.protovapor.com/product/evolv-1a-micro-usb-datacharging-board/
DNA60 Wiring USB module:
https://forum.evolvapor.com/topic/65554-dna60-wiring-usb-module/
and here is a video showing how to use the board:
Hope this helps!
I order 2x of these from FT as well, about 1 week ago, and just today the tracking shows "China Post: Accepted"....I just ordered the SXK Vape Shell...
Same here. Good thing I got an Exocet to tide me over.I order 2x of these from FT as well, about 1 week ago, and just today the tracking shows "China Post: Accepted".
so now I wait...
I order 2x of these from FT as well, about 1 week ago, and just today the tracking shows "China Post: Accepted".
so now I wait...
Yep, same here. Running the Exocet right now.Same here. Good thing I got an Exocet to tide me over.
Sent from my SM-G965U using Tapatalk
I've ordered from FT maybe 4 times in the past 7 months and average time from order date to arrival seems to be from 18-21 days, even for items listed 'in stock' or 'ships in 24 hours'.Oh crap, I'm cancelling my order, then. No positive reviews on it and a FT order that shipped MARCH 29 is just now in the USA, After I emailed them. Second time this has happened. I'm sick of FT. Used them for 3 years but two packages now just Sat for a month in China, and magically moved right after I emailed FT. *smh*
I've ordered from FT maybe 4 times in the past 7 months and average time from order date to arrival seems to be from 18-21 days, even for items listed 'in stock' or 'ships in 24 hours'.
It seems that there is a 4-7 day delay after you order before a tracking number is generated, and then 24-48 hrs after that before the tracking number will show the 'China Post: Accepted', and then there has been about a 7-10 day transit time.
All of this is with the cheapest shipping 'upgrade' to ePacket, and all coming to NJ, USA in that 18-21 days.
Maybe dont give up hope just yet, unless your items pass thru the USPS hub in Chicago, as it seems that location tends to be a black hole where things get delayed or even lost from what I've read here on VU and over on /ecr.
Hope this helps!
Sure thing. I will post an update when it arrives.Thank you It was stuck at "processed through Hong Kong" for a month solid, then showed up in New York 2 days after I emailed them. Same thing happened last time, tracking showed "processed through Hong Kong" and no movement for a month, then I email, then it moves.
Anyway, I see complaints about the Vape Shell on FT, and someone else showed his package from 3FVape was complete. Please let us know how it is when you get it
...
Bought an A-Tank also for the lazy days and some CCell coils.
...
Where did you find an A-tank in stock?
I've been looking for a few months now and both the authentic and clones have been out of stock...
Please share your source...pretty please...
Ok Thx for the info.BBV... there were a few earlier in the week...possible to see more this weekend
Although I bought mine off FB via a guy who bought it from BBV this week...he took delivery of it today and is mailing it to me today
By the time you posted here, that one is likely already sold, especially for an authentic at that price.
By the time you posted here, that one is likely already sold, especially for an authentic at that price.
In my experience, if using a ~1 Ohm build, you dont need much more than 22w for a hot, moist and flavorful vape in the BB, so the 40w version is fine for that.
If I already had the one I wanted I would have gotten this in a heartbeat. I even told the seller that! Someone get it!Looks still available, 10hrs into her for sale add...they haven't changed it to sold or pending.
I dinged Jmoney about it, which he agreed also it was a good price, but he is REALLY wanting a RPG.
Figured anyone here looking for another out and about beater...I'd post them up here as I see them.
As for me.. I have other stuff not BB related to buy, but still vaping related
.86Ω @19w here
Where did you find an A-tank in stock?
I've been looking for a few months now and both the authentic and clones have been out of stock...
Please share your source...pretty please...
$25???????????????? for shipping a tiny item that fits in a padded mailer.Friendly Flipper has them in stock...
https://friendlyflipper.com/product/a-tank-ff-plug-combo/
Downfall is said shipping LOL
Probably be a few on BBV's site tomorrow hopefully *shrug*
Thanks for finding this, but without a hint of contact info, I'm going to have to pass as this vendor looks really dodgy.
$25???????????????? for shipping a tiny item that fits in a padded mailer.
Where are they sending it from, Guam?
Seriously, WTF...
Also, no address, phone nor email on that site, and whois for the domain is private via GoDaddy.
Thanks for finding this, but without a hint of contact info, I'm going to have to pass as this vendor looks really dodgy.
Hopefully in a little more than two hours I can end my RPG obsession! Fingers crossed that BBV puts some up!
Sent from my SM-G965U using Tapatalk
Task accomplished. All whilst smoking ribs for my wife and Mother for our Mother's Day dinner. Damn I'm good!I really do hope you get it !
Task accomplished. All whilst smoking ribs for my wife and Mother for our Mother's Day dinner. Damn I'm good!
Sent from my SM-G965U using Tapatalk