Lol. I wasn't understanding how the number of puffs/hits was governed by the mod, but you're talking about squonking I think. Sorry.Puffs. Sorry wrong choice of words![]()
Lol. I wasn't understanding how the number of puffs/hits was governed by the mod, but you're talking about squonking I think. Sorry.Puffs. Sorry wrong choice of words![]()
I think at one point someone else was thinking the Topside doesn't squonk as well. With the profile rda on two different mods, you definitely get more juice from the cut than the Topside. Enough squonking to where the cotton didn't get dry as fastLol. I wasn't understanding how the number of puffs/hits was governed by the mod, but you're talking about squonking I think. Sorry.
Its definitely an issue. I resolved this not by modifying my Topside mods, but by drilling out the squonk pins by one size on all my Profile RDAs. It squonks soooo much better than when new.I think at one point someone else was thinking the Topside doesn't squonk as well. With the profile rda on two different mods, you definitely get more juice from the cut than the Topside. Enough squonking to where the cotton didn't get dry as fast
Its definitely an issue. I resolved this not by modifying my Topside mods, but by drilling out the squonk pins by one size on all my Profile RDAs. It squonks soooo much better than when new.
http://vapingunderground.com/threads/wts-wtt-aspex-performance-coils.434798/
I dont have one apart at the moment. But it just has a straight hole through it. I drilled them all out one size and voila! Better squonking! I left the pin in the rda since it has kind of a "nut" on it with a hole, and just ran the drill bit through the whole thing.Care to post some pics? I don’t remember if the profile pin has side holes or only a top hole...
Sent from Imperial Star Destroyer Executor
Rainbow?Well damn, now I have 8 Profiles!
I ordered a purple one and in today's mail there were two packages.
Two purple Profiles.
When I placed the order the site froze up during check out. I re-opened it and still had the profile in my shopping cart so I went ahead and checked out.
I went back to the site today and sure enough there were two separate orders.
I'm not going to bother trying to send it back. If anyone needs a Purple Profile I would trade it for a different color or something else.
![]()
Sent from a Galaxy far far away!
I've only got the one profile and I ain't giving her up. Lol.Rainbow?
*blows smoke off the barrel of the Peacemaker* Ya gotta be quicker than that fellas...Sorry guys, @VAPEROXX PM'd me right after I posted that.
I already traded it off.
Sent from a Galaxy far far away!
Big surprise....Sorry guys, @VAPEROXX PM'd me right after I posted that.
I already traded it off.
Sent from a Galaxy far far away!
What color did he give you?Sorry guys, @VAPEROXX PM'd me right after I posted that.
I already traded it off.
Stainless SteelWhat color did he give you?
Nice!Pastorfuzz has a few color options...
![]()
I would have preferred to trade my rainbow, but I would have probably traded my stainless for a purple. He beat me to itStainless Steel
BTW, the SS mesh and rayon is kinda growing on me
When I got my first Profile RDA, I used it on a Furyan. It's awesome!Has anyone used a profile with the mesh on a mech yet? I've only used it in regulated power. Got another one in the mail today black with red tip. Thought about my minimal mod with kylo Ren door because the red matches. I bet that mesh will be hot as hell ya reckon
Oh reallyWhen I got my first Profile RDA, I used it on a Furyan. It's awesome!
http://vapingunderground.com/threads/wts-wtt-aspex-performance-coils.434798/
Not as hot as you might think... about 100-105 watts on a mech with OFRF NexmeshI figured it would be super hot
Wide open airflow I assume guess I'll give it a shot. Can always put it on another.Not as hot as you might think... about 100-105 watts on a mech with OFRF Nexmesh
http://vapingunderground.com/threads/wts-wtt-aspex-performance-coils.434798/
Yup! Wide open!Wide open airflow I assume guess I'll give it a shot. Can always put it on another.
I'm afraid that's what my lungs will look like after trying it on a mech. Lol or are you referring to the mesh it's on
I use it with my Recurve Mech squonk every day. It is amazing.Has anyone used a profile with the mesh on a mech yet? I've only used it in regulated power. Got another one in the mail today black with red tip. Thought about my minimal mod with kylo Ren door because the red matches. I bet that mesh will be hot as hell ya reckon
Cool deal. Just wasn't sure. Never seen anyone with it on a mechI use it with my Recurve Mech squonk every day. It is amazing.
I will say, I use the 20700 batteries and the 21700 batteries in my recurve and the 21700 hit like mike tyson. For the first 30 puffs or so a 1 second pulse hits like a 5 second rip on any other mod, but it is not super hot.I use it with my Recurve Mech squonk every day. It is amazing.
these are the 3 setups i use the most. I also have my intake on another mod.Cool deal. Just wasn't sure. Never seen anyone with it on a mech
To grip tanks that are stuck on tight. The smaller hole on the middle section can grip onto coils to help unscrew them. The tips can be used on rebuildables. You can touch or squeeze the coil while firing it. They're not metal so it doesn't hurt anything or short out or whatever..What's these for?![]()
I tried it on my D133 once and it was instant charcoal.Has anyone used a profile with the mesh on a mech yet? I've only used it in regulated power. Got another one in the mail today black with red tip. Thought about my minimal mod with kylo Ren door because the red matches. I bet that mesh will be hot as hell ya reckon
Well the recurve only throws about 80w I believe it is not a true mech more of a "protected" mech which is why I think that it along with the profile are a perfect combo.I tried it on my D133 once and it was instant charcoal.
i don't know how you're getting away with all that power with these strips, but if I could, I just might love them too.Not as hot as you might think... about 100-105 watts on a mech with OFRF Nexmesh
The Coilart D133 is unregulated, but protected too. It IS dual 18650 though so like 7.5V to the atty.Well the recurve only throws about 80w I believe it is not a true mech more of a "protected" mech which is why I think that it along with the profile are a perfect combo.
I like how everybody has their own system to get their Profiles rockin'. I've only had mine two days. Yesterday I tried it a with one of those beefy 6mm Wotofo cotton laces. I clamped both sides down and fired the mesh a few times. Looked good so I twisted the cotton lace rope to compact it, and just laced it through. The stuff was in there tight. It wasnt squonking for shit so I put it aside.@gsmit1
Full rope of rayon on top of a hunk of cotton jammed down on the springy thingy. Clamp 1 side, jam, then the other
View attachment 130870
Separate about 1/2 the rayon and cut 45 angle top to bottom, clipping cotton off even with springy thingy
View attachment 130874
Thin the rayon tails a bit more an tuck tips to deck
View attachment 130877
Add Cornbread Pudding and work it in slow and low
yah the recurve only runs from 3.2 - 4.2v. I only use 20700 and 21700 in it and not only does it give the perfect hit with the profile, the battery life is excellent. There is almost 0 voltage drop towards the end of the life of the battery as well which is why I always keep spares on me because when it dies I don't even see it coming. I'll rip it and get a huge rip and then the next one i've got nothing and i'm like wtf just happened. Oh my battery is dead.The Coilart D133 is unregulated, but protected too. It IS dual 18650 though so like 7.5V to the atty.
All I can say is that it was instantaneous dry hit from hell.
I use cotton bacon in it and I take a whole piece of it and cut like 1in off and just fluff the bastard out. I unscrew one side of the mesh and pull it back and put the cotton in. Fluff out the ends and tuck the bottom half of the ends into the well then snip the top half at a 45 degree angle. Whatever is left of that I tuck under the mesh to make sure the edges of the mesh all have cotton. I haven't had a dry hit or anything less than an immaculate vape since about 3 days after I got it and started wicking like that.I like how everybody has their own system to get their Profiles rockin'. I've only had mine two days. Yesterday I tried it a while with one of those beefy 6mm cotton laces. I clamped both sides down and fired the mesh a few times. Looked good so I twisted the cotton lace rope to compact it, and just laced it through. The stuff was in there tight. It wasnt squonking for shit so I put it aside.
Today I did the same as above but used some Cotton Bacon Prime. I laced some through but made sure it wasn't as tight as yesterday. I did the 45 cut and poked some of the tail under the mesh. NOW I can see why people love this thing. My wicking technique might need a few adjustments but this going good. I'm using OFRF at 58W with the top row closed off. This is legit.
Thank you sirTo grip tanks that are stuck on tight. The smaller hole on the middle section can grip onto coils to help unscrew them. The tips can be used on rebuildables. You can touch or squeeze the coil while firing it. They're not metal so it doesn't hurt anything or short out or whatever..
Battery life IS great with the strips no doubt. I have my silver one on a Cut right now with the ss/rayon/cotton thing going that Bob recommended.yah the recurve only runs from 3.2 - 4.2v. I only use 20700 and 21700 in it and not only does it give the perfect hit with the profile, the battery life is excellent. There is almost 0 voltage drop towards the end of the life of the battery as well which is why I always keep spares on me because when it dies I don't even see it coming. I'll rip it and get a huge rip and then the next one i've got nothing and i'm like wtf just happened. Oh my battery is dead.
The only thing I have that gets battery life is whatever I put on my minkin v2. that thing is unparalleled in battery life.Battery life IS great with the strips no doubt. I have my silver one on a Cut right now with the ss/rayon/cotton thing going that Bob recommended.
It has one of the new Molicell 20700's in it and it lasts a couple few days with me using it a fair bit lately.
Profile on the recurve is a nice vape. Have to top row of airflow holes closed off. Sweet.
I thought it closed from side to side but the top row is first then from side to side. Surprising to me as well.I haven't taken that top cap off in so long that I didn't even realize you could close just the top row off! Nice