did you polish those doors ?
Become a Patron!
The Official #HandCheck Thread
- Thread starter Chris
- Start date
did you polish those doors ?
You had similar ones on your Yihi about 6-8 months ago, no? You were putting stuff on the back panel, I think. It was when I first joined VU.
Those are cute, though.
You had similar ones on your Yihi about 6-8 months ago, no? You were putting stuff on the back panel, I think. It was when I first joined VU.
Those are cute, though.
it was the paranormal
Yea I love the Pasito. I've had one since they came out. Rba .8 ohm 28g N80. Great lose mtl. But I dropped it a couple times and the top loosened. I cleaned it up and lost the airflow adjustment piece in the sink.Duallies. RBA deck in Dez Pasito. Digging it!
Sent from my iPhone using Tapatalk
Still vapes a dream though
Me too. That's a super slick mod.
But I would for a vicious ant knight stabwood. Lol. $700 before the 50 shipping. LolMine is a clone, I can't afford 400. plus for a mech tube.
Sent from a Galaxy far far away
I had an G class for a while and had no issues with the Tc on that one but the vsticking and another had Yihi with a different chip and fluttered in Tc which didn't work for me at all. Of course I may have been wrong in my settings.
Yea I love the Pasito. I've had one since they came out. Rba .8 ohm 28g N80. Great lose mtl. But I dropped it a couple times and the top loosened. I cleaned it up and lost the airflow adjustment piece in the sink.Still vapes a dream though
I forget what the ohms came to, but I put a 2mm 28/36 SS clapton in it. Real nice flavor. Digging this little thing
Sent from my iPhone using Tapatalk
Yea it's pretty nice. I keep it in my pocket at work so I don't have to walk back to the truck.
you should get a bandolero with vapes in it ! YeHa Revva Revva ! lol
It needs some TCR twiddling (higher) and is a bit less forgiving on the power setting than the top tier YIHI boards..I had an G class for a while and had no issues with the Tc on that one but the vsticking and another had Yihi with a different chip and fluttered in Tc which didn't work for me at all. Of course I may have been wrong in my settings.
Teslacigs WYE 85W with Blitz Ghoul RDA single .75Ω Clapton vaping my DIY Strawberry Fuzznuts 6mg 85VG
Sent from my LGL722DL using Tapatalk
Sent from my LGL722DL using Tapatalk
Posted this in a PM with a few other members 
Watching San Diego State in the Mountain West Tourney.
Stacked Arcless with .3 fused... using that poopy Goon 1.5 I got with the Grip last month finally... so much voltage loss in that thing... but only other 25mm I have is on the grip (Asgard Mini)
Sent from my iPhone using Tapatalk
Watching San Diego State in the Mountain West Tourney.
Stacked Arcless with .3 fused... using that poopy Goon 1.5 I got with the Grip last month finally... so much voltage loss in that thing... but only other 25mm I have is on the grip (Asgard Mini)
Sent from my iPhone using Tapatalk
And before someone asks...
No it's not a clone!
now "who" would do something like that ....
Slim Piece with KALI RDA
And before someone asks...
No it's not a clone!
Sent from a Galaxy far far away
does a 20650 fit in that ?
how loose/tight is the 18650 in it ?
It's not the tube, it's the switch design.
Sent from a Galaxy far far away
yeah. i just ordered a black slam and may get a slim. but i was just wondering, an 18650 does just fine.
Yes, I have several 18650 tubes that are great.
The Slim Piece is a keeper, solid hard hitting mod.
Sent from a Galaxy far far away
And a .999 Silver cup will make it bulletproof
Always liked the Slims, never owned one...the size and price is very alluring.
Never looked, wonder if they make a stacked Slim?
Sent from my iPhone using Tapatalk
The Ghoul. One of my fav's, I love the damn thing..Teslacigs WYE 85W with Blitz Ghoul RDA single .75Ω Clapton vaping my DIY Strawberry Fuzznuts 6mg 85VG
Sent from my LGL722DL using Tapatalk
My first try at split tails, in the Narda, thanks to @inganeer . Let's see what this bad boy's got
View attachment 156554
View attachment 156555
How is that going to vape with the coil not in direct path of the Air Flow?
Split tails on the NarDa I remember being like this...
Then separate over the screw heads...
Otherwise easier way is like this
Like shit apparently. Didn't realize my mistake, and need to start over
I like the NarDa, good vape from it... can prove a PITA to coil... but shines with simple wire...
I normally did the angled coil and dropped it in the deck a smidge... also 2mm coils are great in this atty... 2mm 5.5 wrap 26g N80 is like .5Ω
Thanks for pointing out my mistake, I was kinda pissed
Gives me a reason for another try I can do 2mm, that was 2.5mm, but no N80 for me.
Thanks for pointing out my mistake, I was kinda pissed
Stainless Steel works similarly..28g. .48Ω but will go up in Ωs when heated
Yup, that's what I will use. Kinda my go to for mech squonk, or even one more wrap at closer to .6 is fine to me. Also 26g Kanthol at around .6 I am good with.
If you end up liking the NarDa, I think you will really like the Le Concorde... its numero uno for me... much easier to build too lol
Thanks Don, I'll let you know, and keep it in mind, you enabling SOB
Honestly i have been looking for anything to even come close to the Chtulu sp? 1928 for me, so far no dice......
Thanks Don, I'll let you know, and keep it in mind, you enabling SOB
There are a lot of great single coil RSAs out there... I mean a lot... from Cheap Clones that are spot on to the authentic, to overly priced authentic.
I like the Le Concorde A LOT... I liked the NarDa, I liked the Haku's (Lil Airy for me now when I squonk) The Jorda B from KHW mods is another great RSA... didn't like the NarCa a ton, I have a Stumpy, which Dogman is using above.. dual coil... vapes really well too...
But that is the thing... no need to get the new new... I got rid of most of my unused RSAs, and kept like 4
Le Concorde, Hadaly, Stumpy and Skyfall.
and If I had to just pick one and throw the rest away to never use any other... Le Concorde would be my choice... does everything I want it to do... Really good flavor... choke the air down to a decent MTL'ish vape or open it up for a great restricted DL... easy to build on... doesn't get flaming hot... looks good and has a flat juice well, where the pin doesn't protrude up to high, so when you squonk it saturates the wicks and sucks back the overflow.
Plus if you want a clone... the SXK is nearly spot on... or look to spend about $240 on an authentic since they were a limited run of 1000 years ago.
That looks really cute!
You have CF on your Para? Mine is elephant or something. It’s nubbly leather. And some CF in back.
Last edited:
Yea I love the Pasito. I've had one since they came out. Rba .8 ohm 28g N80. Great lose mtl. But I dropped it a couple times and the top loosened. I cleaned it up and lost the airflow adjustment piece in the sink.
Your Pasito hand checks had me looking at one on sale for about $23. But no RBA that I could find. Can you buy it separately?
Teslacigs WYE 85W with Blitz Ghoul RDA single .75Ω Clapton vaping my DIY Strawberry Fuzznuts 6mg 85VG
Sent from my LGL722DL using Tapatalk
Dare I ask what’s in the Fuzz Nuts? Lol
Posted this in a PM with a few other members
Watching San Diego State in the Mountain West Tourney.
Stacked Arcless with .3 fused... using that poopy Goon 1.5 I got with the Grip last month finally... so much voltage loss in that thing... but only other 25mm I have is on the grip (Asgard Mini)
Sent from my iPhone using Tapatalk
It’s a sock check. Nice!
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Decided to break out a couple of the 18650 mechs tonight
YeahIs that a mushroom? Nice mod, DM.
I could go rhere...but I'll behave myself...lol
Pretty much a fuzzy peach meets peanut butter recipe that has a unique flavor that takes some getting used to. Still a work in progress, but getting better every batch.
Sent from my LGL722DL using Tapatalk
