2Fdeal:Wizman Puff Boy 200W Mod &$5.99 Artha v2 Style RDA

Discussion in '2Fdeal' started by Jane_Qiu, Aug 13, 2019 at 11:40 PM.

  1. Jane_Qiu

    Jane_Qiu Silver Contributor Member For 2 Years Unlisted Vendor

    Blog Posts:
    0
    Joined:
    Nov 17, 2016
    Messages:
    942
    SMOK RPM40 40W 1500mAh VW Mod Pod System Starter Kit 4.5ml/0.4ohm/0.6ohm
    [​IMG][​IMG][​IMG][​IMG]
    Features
    Battery Capacity: 1500mAh
    Standby Current: < 140uA
    E-liquid Capacity: 5ml(Empty pod) / 4.3ml(Standard Pod) / 4.5ml(Nord Pod)
    Firing Time: 0.001S
    Output Mode: Watt
    Input Voltage: 3.3V~4.2V
    Output Voltage: 0.5V~4.1V
    Output Wattage: 1W~40W
    Charging Current: 0.88A (Max)
    Charging Voltage: 5V
    Resistance Range: 0.2ohm~2.50ohm
    Overcharge Voltage: 4.3V
    Over-discharge Voltage: 2.4V
    Modern and stylish appearance, smooth surface and portable
    Built-in 1500mAh battery provides sufficient power for the RPM40
    The RPM40's wider mouthpiece allows more air inhalation
    Classic box mod to fully enjoy the steam process and huge vapor
    Max output power for 40W
    0.96 inch TFT screen
    More coil options for RPM pod and large e-liquid capacity
    Multiple protections for a better vaping experience


    $5.99 Artha V2 Style 24mm RDA Rebuildable Dripping Atomizer w/BF Pin
    [​IMG][​IMG][​IMG][​IMG]
    Features
    24mm overall diameter
    Deep juice well
    Side airflow control
    Gold-plated build deck
    Dual-post design
    510 threading connection
    Comes with bottom feeder pin

    $6.99 Haku Venna Style 22mm RDA Rebuildable Dripping Atomizer w/BF Pin

    [​IMG][​IMG][​IMG]
    Features
    510 threading connection;
    22mm overall diameter;
    Removable 510 drip tip;
    Adjustable airflow;
    Squonk option;
    Dual posts design

    Authentic Wizman Puff Boy 200W Temperature Control Box Mod 18650
    [​IMG][​IMG][​IMG][​IMG]
    Features
    Thread: 510
    High-performance mod with retro and interesting appearance
    Powered by dual 18650 batteries with max 200W output
    8-bit drawing board
    Equipped with 1.3 inch OLED screen
    Nintendo Gameboy body design
    Customizable animated screen saver
    Battery: dual 18650 batteries(not included)
    Output: 10-200W
    Screen: 1.3 inch OLED display
    Voltage range: 1-8V
    Resistance: 0.1ohm-3ohm
    Temperature range: 100-300°C
    Standby current: 450μA
    Mode: Power/TC(Ni, Ti, SS316, TCR)/Bypass modes
     

Share This Page

Close This Message