3FVape -- New Arrivals

[Gina3FVAPE]

The Newest Listed Products from 3fvape.com​

Hi, all

From now on, I will also update our contents on the first post so you can find our newest items easily.

***********************3FVAPE***************************

New Items from 3Fvape (21/10)

​

AUTHENTIC YILOONG KHOSLA TRIPLE COIL SUB TANK - SILVER, STAINLESS STEEL + GLASS, 3.5ML, 22MM DIAMETER - $24.99



Top Airflow Control:
Top air inhale keeps you 100% away from leakage, Air inhale from the top, it goes downward to the upper part of the coil then the air goes out together with the vapor that the coil generate. Also, when it sits on the mod, super easy to twist the air flow control ring whenever you need.

Triple Coil Head and Single Coil for DIY
A. Triple little coil were integrated into just one ( 3 tiny 0.9 ohm & 1.5 ohm series coils 50~130W),not only improves the amount of vapor but also keeps the flavor of each little coil and reduce heat with a heat sink at the bottom. Ni coil and Ti coils are available.

B. Single coil for DIY. The coil was specially designed, simple construction, way more easier than RBA base rebuild, even with a fat finger that is super-duper easy both for newbies and veteran to rebuild on your own.

Splash Proof Drip Tip
With this drip tip, it ensures no juice spit back through the drip tip, thus won't get any hurt by splash.

Juice Recycle
Since we use a splash proof drip tip, due to its special construction, unvaporized juice or extra juice gather at the bottom of the drip tip (a baffle). With gravity helps, all the juice will be recycled to the juice chamber.

 

[Whiskey]

Sexy mod yes sexy....
A couple cons for me, would be the too small fire and up down buttons and adjustable pin, should have a floater on that. But reasonable price point

 

[Tim Vatic]

I like those small tactile buttons.

 

[Breazy_Com]

Looks cool !

 

[Gina3FVAPE]

Rail Box Style Evolv DNA 40 Temperature Control VW Variable Wattage Box Mod

Black: http://www.3fvape.com/vv-vw-mod/439...-mod-black-aluminum-brass-140w-1-x-18650.html

Silver: http://www.3fvape.com/vv-vw-mod/438...mod-silver-aluminum-brass-140w-1-x-18650.html

510 threading connection;
Authentic Chipset DNA40 by Evolv;
Variable wattage: 1~40W in 0.1W increment;
Atties on rail;
Box made in anodized Aluminum 5083 (AW5083 / AW-AIMG4.5Mn07);
Rail: aluminum;
510 Connector: brass;
Switch: Stainless steel;
Compatible atomizers: max. diameter: 24mm, Max. length: 61mm (without drip-tip) (atomizer is not included)

 

[Whiskey]

Looks cool !

Hint hint....LOL

 

[Zamazam]

I like the brass one, so shiny....

 

[Whiskey]

Me tooooooooo,

 

[Tim Vatic]

the 510 connection on adjustable rails inside the box is an excellent design. very pocket friendly.

 

[Gina3FVAPE]

So glad you like it

 

[Gina3FVAPE]

SXK Nebula Temperature Control VW Variable Wattage APV Box Mod

510 threading connection with adjustable center pin;
Stainless steel connector;
Variable wattage: can be adjustable from 1W to 60W in 0.1W increments;
Temperature control: 200'F~600'F (100'F~300'C);
Resistance range: 0.06~5 ohm (normal working) / 1ohm (standard load);
Powered by 1 x 18650 battery (battery not included);
Micro-USB charging port;
Short circuit protection;
Low voltage warning;
High temperature alarm function;
Stainless steel firing button;
Custom milled aluminum buttons for power adjustment;
Pass-through capability

60W (Black): http://www.3fvape.com/vv-vw-mod/439...pv-box-mod-black-aluminum-160w-1-x-18650.html

60W(Brass): www.3fvape.com/vv-vw-mod/4274-sxk-nebula-style-temperature-control-vw-variable-wattage-apv-box-mod-golden-brass-160w-1-x-18650.html

60 W (silver): http://www.3fvape.com/vv-vw-mod/439...v-box-mod-silver-aluminum-160w-1-x-18650.html

50W(Brass): www.3fvape.com/vv-vw-mod/4275-sxk-nebula-temperature-control-vw-variable-wattage-apv-box-mod-golden-brass-150w-1-x-18650.html

Have a detail view with 3fvape blog: http://blog.3fvape.com/mod-apv/sxk-nebula-temperature-control-vw-box-mod-unboxing/

 

[Gina3FVAPE]

SXK VF Style Temperature Control VW Variable Wattage APV Box Mod

http://www.3fvape.com/vv-vw-mod/4435-sxk-vf-style-temperature-control-vw-variable-wattage-apv-box-mod-black-aluminum-160w-1-x-18650.html#.VYyhSFJZD0l']Link: http://www.3fvape.com/vv-vw-mod/443...pv-box-mod-black-aluminum-160w-1-x-18650.html[/URL]

Some Key Info for http://www.3fvape.com/vv-vw-mod/4435-sxk-vf-style-temperature-control-vw-variable-wattage-apv-box-mod-black-aluminum-160w-1-x-18650.html']SXK VF style Box Mod[/URL]

Brass 510 connector;
Diameter: 22mm (18650 tube);
Powered by 2 x 18650 batteries (parallel, not included);
Temperature range: 200'F~600'F;
Synchronous rectification for maximum battery life and minimal heat generation;
Temperature sensing wire;
Variable wattage: Wattage can be adjusted from 1W to 60W in 0.1W increment;
Li-battery output voltage: 3.0~4.35V;
Atomizer resistance (standard mode): 0.06~5.0 Ohm;
Atomizer resistance (temperature control mode): 0.1~1 ohm

 

[Gina3FVAPE]

Authentic Pioneer4you iPV3-Li V2 165W Temperature Control Box Mod (Updated 2015/06/27)

The IPV3-Li V2 Box Mod by Pioneer4You is the newest version and most updated version of the famous IPV3 Mod, allowing you to go up to 165 watts and fire atomizers as low as 0.10 ohms.

The Pioneer4You IPV3-Li V2 is equipped with the new SX330-V3SL chip, the chip features temperature control and gives you the ability to upgrade your firmware to increase the watts for future developments. The Pioneer4You IPV3-Li V2 Mod features an OLED display screen so you can see wattage, temperature control, voltage, battery life, etc.

More info via

Black: http://www.3fvape.com/vv-vw-mod/445...x-mod-black-7165w-2-x-18650.html#.VY5WTlJZD0k
http://www.3fvape.com/vv-vw-mod/445...x-mod-black-7165w-2-x-18650.html#.VY5WTlJZD0k
Silver: http://www.3fvape.com/vv-vw-mod/446...ttage-apv-box-mod-silver-7165w-2-x-18650.html

Authentic Freemax Starre Pro T C Sub Ohm Tank

Authentic Kamry 60W TC APV Box Mod

 

[Gina3FVAPE]

New Items from 3Fvape (06/29)
​

Hiwyer Little Dimple 50W VW APV Box Mod - $37.88

The Hiwyer Little Dimple 50W VW mod has 510 recessed connection with adjustable copper center pin for batter conductivity. The mod features heat sinks on the top and vent holes on the bottom to prevent the battery from overheating.

More info via
http://www.3fvape.com/vv-vw-mod/447...-apv-box-mod-silver-golden-aluminum-750w.html

24 AWG Ni200 Non Resistance Wire for Atomizers - $5.38
10 meters length;
24 AWG, 0.51mm diameter;
Resistance: 0.175 ohm/cm;


Origen Genesis V2 Mkii Style RebuildableTank Atomizer - $18.88

New center pin and nut to fasten the wire at the + pole (no more need to screwing the + pole to get the hole into the right position);
New shape of the "neck", where the top cap goes on- to avoid sticking of the top cap;

 

[Gina3FVAPE]

Mutation X S Style RDA Rebuildable Dripping Atomizer $10.88

Main info:
510 threading connection with adjustable copper center pin;
Ultra compact 17mm Height;
Multi-sized angled bottom airflow:
1.5mm, 2.0mm, and 2.5mm;
Airflow controlled by included silicone sealing plug;
Dual parallelogram side airflow array:
18 Total / 3 x 3 Array;
2mm each;
Bladed angular side airflow control:
11mm black delrin widebore competition drip top;

More:http://www.3fvape.com/rebuildable-a...zer-silver-stainless-steel-22mm-diameter.html

Abaddon Style Mechanical Box Mod $33.88

Main info:
510 threading connection;
Full brass construction;
Full mechanical switch;
Dual parallel 18650 batteries (battery not included);
Silver plated copper contacts;
Negative battery terminals adjustable (flat head screw driver required)

More: http://www.3fvape.com/mechanical-mo...mechanical-box-mod-brass-brass-2-x-18650.html

Authentic Luxyoun Unik V2 VW APV Box Mod $72.77

Yihi sx1500 chip;
510 threaded connection with copper center pin;
Watts range: 7~150W (manufacturer tested);
OLED display screen show current battery voltage and output voltage, atomizer resistance, the output power, the puff and smoking for on time;
Variable wattage: Wattage adjusted from 7W to 150W in 1W increment;
Output voltage: 3.2~17.1V;
The standard load is 3 ohm, can work at 0.3 ohm load;
Static current: 4.2V/00uA;
More: http://www.3fvape.com/vv-vw-mod/450...x-mod-red-brown-red-wood-7150w-2-x-18650.html

 

[Gina3FVAPE]

Eiffel 50W VW Variable Wattage Box Mod -- $40.99

Main info:
510 threading connection with copper center pin;
Stainless steel connector;
Resistance range: 0.2~3.0 ohm;
Unique design with three controlling buttons on, easy to operate;
Monster vaping, with the maximum output of 50W;
Over-heat protection function can make it be used in long terms;
Innovative hing type battery cover, slide for lock and unlock;



Dos Equis Style Mechanical Box Mod + Manta V2 Style RDA Kit -- $32.99

Main info:
Mod:
510 threading connector;
Silver coated copper pins and terminals;
Material: Phantom Brass and Full Coat Delrin;

RDA:
510 threading connection with copper center pin;
Compatible with 510 drip tip (stainless steel + POM);
Dual posts design for single coil build;
Top cap unscrews, there are 9 air vents on the top cap for airflow adjustable;

KSD Vamo PT Passthrough 25W Mod -- $24.99

Main info:
Yihi Chip;
Min resistance: 0.3 ohm;
Protection functions: short protection, Reverse Battery Protection and low resistance protection, memory function;
Low voltage alarm: When the battery voltage is less than 3.4V (1 x battery) or 6.0V (2 x batteries), Vamo PT 25 W cannot work;
It has the USB connection, You can Charge Your Vamo Directly;

Adamantium X Style Mechanical Box Mod -- $32.99

Main info:
510 threading connection with adjustable 510 center pins;
Adjustable negative pins;
304 stainless steel door (suicide doors);
Top firing brass button with locking mechanism;

 

[Gina3FVAPE]

SMOKJOY Wheel Wind RDA Atomizer -- $19.99

Main info:
510 threading connection with adjustable copper center pin;
Heat sinks to dissipate heat;
Diameter: 22mm;
Stainless steel construction;
Wide bore drip tip;
Triple-posts;
Phillips head set screws;
Adjustable Airflow

REMentry Style RDA Atomizer -- $8.88

The REMentry style RDA is constructed of a combination of stainless steel and Delrin. The deck features a three post design with each post featuring a squared design. The negative posts are milled to the deck and the positive post is reinforced with a squared PEEK insulator.

510 threading connection;
Peak insulators;
Triple-pole design;
Airflow adjustable, two air slits on the middle of the sleeve;
Square center posts with large post holes to make building;
Delrin chuff style cap with a very easy to use AFC;
Delrin Base to reduce heat transfer;
Cyclops style airflow holes;
Diameter: 22mm

 

[Gina3FVAPE]

Authentic Smokjoy Ivapor 60W VW Variable Wattage APV Box Mod -- $49.99

The Smokjoy lvapor VW mod is supportable resistances range from 0.3 to 9.9 ohm. It supports output power ranges from 7.0W to 60.0W. This high power mod has two working modes: auto mode and manual mode, the system will reduce the output power automatically when the battery have no enough power to reach the set wattage.

Place an order:http://www.3fvape.com/vv-vw-mod/460...ack-aluminum-760w-1-x-18650.html#.VZoVKFKjcSB

Smokjoy Talos RTA Atomizer -- $25.99

510 connection with adjustable copper center pin;
Airflow control and Rebuildable;
Quad-pole design;
Liquid capacity: 3.0mL;
Combine RDA, RBA, Sub ohm tank 3 in 1, can store
E-liquid, can use like RDA, can use like sub ohm tank;
Stainless steel construction and Pyrex glass tank;
Diameter: 22mm

Order it now:http://www.3fvape.com/rebuildable-a...nt-silver-3ml-22mm-diameter.html#.VZoVqFKjcSB

Authentic Smokjoy NFire APV Box Mod -- $48.88

510 threading connection with brass center pin;
Sandalwood construction;
Variable Wattage: Wattage can be adjusted from 5.0W to 50W;
Voltage: 3~6V;
Coil resistance: 0.4 ohm~2.4 ohm;
Output voltage:2~9V;
Built-in two soft roll batteries: 2400mAh;
2400mAh inside magnification battery;
Wooden body with delicate carving;
Micro USB charging port;
Fit sub ohm atomizer perfectly;
Starts immediately after pressing the fire button;
Enters dormant state automatically in 30 seconds;
Be locked after pressing the fire button 5 times;
Auto pause after 10 seconds' puff to prevent the chip overheating;
Adjustable brass contact pin;
Replaceable high capacity lithium 18650 battery;
The chip is TS500

Take an order: http://www.3fvape.com/vv-vw-mod/461...n-sandalwood-550w-1-x-18650.html#.VZoSMFKjcSB

 

[Gina3FVAPE]

Kayfun Lite Plus Five Pawns Style RTA Tank -- $25.88


Main info:
Constructed from solid stainless steel;
Newly designed removable "Pawn" drip tip;
Five Pawns logo laser engraved on bottom assembly;
Recessed Fill Hole and Adjustable Airflow Screw on Bottom Assembly;
Newly designed top cap to match contours of pawn drip tip;
Easy to handle and provides a great flavor and a high volume of vapor

Authentic KSD U1000 Box Mod -- $69.99

Main Info:
510 threading connection with spring-loaded brass center pin;
Stainless steel connector;
Variable Wattage: Wattage can be adjusted from 5W to 100W;
Atomizer resistance: 0.1~3.0 ohm;
Temperature control: 200'F~600'F / 100'C~300'C;
Powered by 2 x 18650 batteries (not included);
LCD screen shows battery condition, voltage, wattage, temperature and resistance;
Magnet battery cover;
Air slits on the bottom for better heat dissipation

http://www.3fvape.com/clearomizer/4...ansparent-22mm-diameter-3ml.html#.VZtj3lKjcSA
AUTHENTIC SMOKJOY FACETANK Clearomizer w/ Ni200 Cotton Coil -- $22.88

Main info
510 threading connection;
Resistance: 0.1 ohm (works with 50~150W) / 0.4 ohm (works with 20~100W);
Liquid capacity: 3ml;
Removable stainless steel 510 drip tip;
Ni200 cotton coil;
Material: Stainless steel + Pyrex glass;
Ni200 cotton coil (NCC, named by Smokjoy);
Fits for temperature control box mod perfectly;
Lowest resistance is 0.1 ohm;
Dual airflow control system (bottom hidden airflow control + drip tip airflow control)

 

[Gina3FVAPE]

SXK SQRS Reloaded Squape RS Style RTA Tank Comes with W deck -- $21.88

Main Info:

510 threading connection with adjustable center pin;
316 stainless steel construction;
Ematal / ceramic coated aluminum non-conductive deck;
Standard 510 atomizer connection with fully adjustable center post;
Airflow adjustment ring with 6 different hole sizes from 0.9mm to 3.1mm;
Approximately 3.8~4ml juice capacity;
Standard 510 drip tip connection;
Replaceable borosilicate glass inner tank sealed with o-rings;
Comes with W deck (Wider slot to accommodate a larger piece of cotton wick)



If you do not want the silver one, you can choose a tank with a sleeve in different color (4 color available) via

http://www.3fvape.com/rebuildable-a...-sleeve-silver-stainless-steel-38ml-22mm.html


or you can choose only a sleeve with AFC ring via:

http://www.3fvape.com/misc/4663-sxk...html?search_query=sxk&results=24#.VZ4XSLWjcSA

 

[cindycated]

SXK SQRS Reloaded Squape RS Style RTA Tank Comes with W deck -- $21.88

Main Info:

510 threading connection with adjustable center pin;
316 stainless steel construction;
Ematal / ceramic coated aluminum non-conductive deck;
Standard 510 atomizer connection with fully adjustable center post;
Airflow adjustment ring with 6 different hole sizes from 0.9mm to 3.1mm;
Approximately 3.8~4ml juice capacity;
Standard 510 drip tip connection;
Replaceable borosilicate glass inner tank sealed with o-rings;
Comes with W deck (Wider slot to accommodate a larger piece of cotton wick)

If you do not want the silver one, you can choose a tank with a sleeve in different color (4 color available) via

http://www.3fvape.com/rebuildable-a...-sleeve-silver-stainless-steel-38ml-22mm.html

or you can choose only a sleeve with AFC ring via:

http://www.3fvape.com/misc/4663-sxk...html?search_query=sxk&results=24#.VZ4XSLWjcSA

@Gina Will the colored SXK tubes fit the non-SXK SQRS as well? I'm looking at the one with the 5 decks and bell cap - who makes that?

 

[Gina3FVAPE]

@Gina Will the colored SXK tubes fit the non-SXK SQRS as well? I'm looking at the one with the 5 decks and bell cap - who makes that?

Yeah, the tube can fit them non SXK SQRS. and the 5 decks we have http://www.3fvape.com/rebuildable-a...r-316-stainless-steel-40ml-22mm-diameter.html is from ivogo

 

[Gina3FVAPE]

Pioneer4you iPV3-Li V2 APV Box Mod in Stock
The order from USA and Canada will be shipped in 1~3 business days from California USA.​

Main Info:

Billet Aluminum body;
YiHi SX330V3SL Chip;
Powered by two high amp 18650 batteries (not included);
Three button design;
Micro USB port for updates;
Dovetail sliding and ball locking door;
Brass 510 spring loaded connection;
Variable voltage from 7W to 165W;
Atomizer Resistance: 0.10 ohm~3.0 ohms;
Temperature control: 212 to 572 Degrees Fahrenheit;
Temperature Control Atomizer Resistance: 0.05 ohm~0.3 ohm;

Note:

Black:
Black: http://www.3fvape.com/ship-in-24hrs...attage-apv-box-mod-black-7165w-2-x-18650.html

Silver:
http://www.3fvape.com/vv-vw-mod/446...-mod-silver-7165w-2-x-18650.html#.VZ-HWrWjcSB

 

[Gina3FVAPE]

Authentic Eleaf iStick 40W TC Delivered in 2 Days

Specification:
Thread: 510;
Battery: 2600mAh;
Variable wattage: Wattage can be adjusted from 1W to 40W;
Temperature range: 100'C~315'C / 200'F~600'F;
Resistance Range: 0.2 ohm~2.5 ohm (Wattage) / 0.1 ohm~1.0 ohm (Temperature Control);
Recommended Atomizers: Joyetech Delta 2, Kanger Subtank mini, SMOK Gimlet Cloud Tank, etc

http://www.3fvape.com/vv-vw-mod/444...kit-silver-1-x-40w-200600-f.html#.VaNkdbWjcSA

 

[Gina3FVAPE]

Bauway Ciggo Bottom Feed Mechanical Mod w/ RDA -- $35.99

Main Info:

510 threading connection;
Bottom feed mod, comes with a RDA (44 x 19mm);
RDA supports dual coil build;
Airflow adjustable;
No leaking, no burning taste with pure taste;
Bottom feeding with 5ml e-liquid bottle;
Powered by 1 x 18650 battery (not included);
Portable with saponaceous design;
Easy to fill the tank with bottom feeding system

Eleaf iStick 50W -- $39.89

Main Info:

Eleaf iStick 50W with OLED Screen MOD Battery - 4400mAh, a super upgraded edition based on iStick series batteries. It brings more powerful vapor due to the expanded range of output voltage (2V~10V) / wattage (5W~50W) with 4400mAh battery capacity. With the additional temperature alarm function, it ensures high-safety even in strong vaping.

 

[Gina3FVAPE]

Wha'bout this?

Hi, The ipv D2, the newest version, we will get it online in near future. I will post it here if we get it.

 

[Gina3FVAPE]

Hiwyer 007 160W Mechanical Box Mod -- $45.99

Main Info:
510 threading connection with adjustable copper center pin;
Side mounted firing button;
Magnet back cover case;
Powered by 2 x 18650 batteries (battery not included);
Maximum output power: 160W;
Resistance range: 0.1~3 ohm;
Input voltage: 3~4.2V;
Micro USB charging port;
Air holes on the bottom;
LED light battery capacity 4 grade display

More info on Hiwyer 007 160W Box Mod via http://www.3fvape.com/mechanical-mo...d-silver-aluminum-2-x-18650.html#.VadPZbXjXVA


Joyetech eGrip OLED CL -- $48.88

Main Info:

The OLED screen presents electric quantity, watts and volts, resistance and timing when you are taking puffs;
eGrip OLED can shift between the VV / VW mode when the battery is on by pressing the round button for three times;
In VV mode, you can adjust output voltage between 2.0V and 8.0V. In VW mode, you can adjust output wattage between 5W and 30W. We kindly suggest you use 20W as maximum wattage when applying eGrip CL head. More info on the eGrip OLED visit http://www.3fvape.com/vv-vw-mod/4821-authentic-joyetech-egrip-oled-cl-1500mah-vv-vw-variable-voltage-wattage-starter-kit-cherry-red-28v-530w-36ml-1-ohm.html#.VadParXjXVA

 

[Gina3FVAPE]

Immortalizer Style RDA -- $15.88

Main Info:
510 threading connection with brass center pin;
Ceramic heat insulation;
Airflow adjustable;
Dual pole for dual coil build.

Link: http://www.3fvape.com/rebuildable-a...ainless-steel-22mm-diameter.html#.Vai6erXHGjo


Geyscano Style 50W Bottom Feeder Mod + RDA Kit

Main Info:

RDA:
510 threaded connector with adjustable holed center pin stainless steel;
Comes with removable stainless steel wide bore drip tip;
Material: Stainless Steel
Quad posts design;
Posts material: Stainless steel;
Air flow adjustable;
Diameter: 22mm

Mod:
510 threaded connector with adjustable stainless steel holed center pin;
Variable wattage: Wattage can be adjusted from 5W to 50W;
OLED screen shows battery level, voltage, wattage and resistance;
Material: Aluminum;
OLED chip screen;
Side firing button;
Magnetic front door;
Powered by 1 x 18650 battery (not included);
13ml juice bottle

 

[Gina3FVAPE]

Pioneer4you IPV 4S 120W Box Mod -- $76.99

Features
Visual Operating System;
Support both types of atomizers (Nickel wire and Ti wire) on its Joule Mode;
510 threading connection;
Available in specially designed beautiful colors;
Temperature Control option;
Micro USB Charging Port: Vape while charging'
Brand New designed User Interface

Hammer of God Style Mechanical Box Mod
http://www.3fvape.com/mechanical-mo...od-black-aluminum-4-x-18650.html#.VaySCbXHGjo

Main Info:
510 threading connection with adjustable silver plated center pin;
Brass connector;
A parallel quad-battery;
Unregulated box mod;
A mechanical switch;
Magnet battery cover;
3-digit LCD screen shows voltage;
Capable of producing over 300 watts of power;
Powered by 4 x 18650 batteries (not included)

 

[Gina3FVAPE]

Uwell Crown Sub Ohm Tank

Main Info:
510 threading connection;
Capacity: 4mL;
Resistance: Single coil 1.2 ohm (30~80w) / Dual coil 0.25 / 0.5 ohm / Ni200 0.25 ohm (80~120W);
Single Vertical Coils: 1.2 ohm (works with 10~30W) / 0.5 ohm (works with 30~80W);
Dual Parallel Wrapped Vertical Coils: 0.5 ohm (works with 30~80W) / 0.25 ohm: (works with 80~120W);
Coil material: Food grade stainless steel heating coil, friendly environment with huge vapor;
Coil option: Single coil and dual coil available, 1.2 ohm for single coil; 0.25 ohm, 0.5 ohm and NI200 0.15 ohm for dual coil;
100% Japanese organic cotton, non-poisonous, pure taste;
Advantage: Stainless steel tube vaporizer, glass oil storage Tank, all parts detachable for easy cleaning;
Filling option: Top filling and bottom filling available, more convenient and practical to use with large capacity;
Airflow design: Large airflow design, huge vapor smoking by lung

Castor Style RDA


Main Info:
510 threading connection;
304 stainless steel;
Brass airflow control ring with extra-long (1.5mm high x 14mm wide) cyclops air holes;
4mm deep juice well;
Innovative PEEK Positive post insulator that prevents the positive post from turning;
Special stainless steel drip tip with 10mm inner bore and Delrin base to prevent heat transfer;
Delrin drip tip adapter, so you can still use standard 510 drip tips;
Innovative juice guard system to prevent juice condensing on inner dome and leaking out the air flow holes;
Optimized inner chamber for excellent cloud production and flavor functional heat fins on top cap

 

[Gina3FVAPE]

Sniper Style Mechanical Box Mod

Main Info:
The top part and the base are made by brass, the middle part is made by solid wood. So it looks very elegant.
The shape of the mod is special designed, so people feel very comfortable whole holding it.
Powered by 2 x 18650 batteries (not included)

Place an order: http://www.3fvape.com/mechanical-mo...brass-wood-brass-2-x-18650.html#.VbMmHrXHGjol

http://www.3fvape.com/rebuildable-a...ainless-steel-22mm-diameter.html#.VbMmFbXHGjo
Rock Fish Style RDA -- $13.99

Main Info:
510 threading connection with brass plated gold contact pin;
1/2drip well;
Water-drop air holes;
With typhoon air system;
Replaceable adapter;
Triple-pole design;
Diameter: 22mm

http://www.3fvape.com/rebuildable-a...ainless-steel-22mm-diameter.html#.VbMmFbXHGjo

 

[Gina3FVAPE]

Taifun GS II Style RTA -- $17.88

Main Info:

Diameter: 19mm;
Height: 50mm (without drip tip);
Type: Glass tank atomizer;
Material: Stainless steel;
Thread: 510 thread;
Glass tank capacity: 3ml;
Seal material: Medical grade silicon seal;
Oil feeding: by mesh;
Could be controlled and adjustable;
2 air flow control rings (3 holes);
1 air flow control ring (1 hole);
1 dripping cap to allow you dripping;

Place an order: http://www.3fvape.com/rebuildable-a...-black-stainless-steel-3ml-19mm-diameter.html

KSD TC U1000 Box Mod + A2 Sub Ohm Tank Kit

Mod
510 threading connection with spring-loaded brass center pin;
Stainless steel connector;
Variable Wattage: Wattage can be adjusted from 5W to 100W;
Atomizer resistance: 0.1~3.0 ohm;
Temperature control: 200'F~600'F / 100'C~300'C;
Powered by 2 x 18650 batteries (not included);
LCD screen shows battery condition, voltage, wattage, temperature and resistance;
Magnet battery cover;
Air slits on the bottom for better heat dissipation;

A2 RBA Tank:
510 threading connection;
Diameter: 22mm;
Resistance Range: 0.5 ohm;
Liquid capacity: 4mL;
Made of stainless steel and Acrylic;
Comes with RBA base;
Replaceable high quality Acrylic glass tube;
Cloud vapor production;
Extreme enjoyable taste

Place an order: http://www.3fvape.com/mod-kit/4969-...2-x-18650-200600-f-100300-c.html#.VbXKIbXHGjp

 

[Gina3FVAPE]

GINAAAAA!!!

Hi,the video is from pioneer4you.com. I think it is from their staff. We will contact our suppliers for checking.

 

[Gina3FVAPE]

Storm Upgraded Version Box Mod

Main Info
510 threading connection with brass center pin;
Stainless steel connector;
Variable Voltage: Voltage can be adjusted from 3.0V to 6.0V;
Resistance range: 0.2~3.0 ohm;
High quality LED shows voltage;
Side fire bottom;
Powered by 2 x 18650 batteries (not included)

SXK Zero V3 Box Mod

Main Info:
510 threading connection;
Spring-loaded center pin;
Variable wattage: Can be adjustable from 1W to 60W in 0.1W increments;
Temperature control: 200~600’F, (AKA 100~300’C);
Resistance range: 0.06~5 ohm (normal working) / 1 ohm (standard load);
Micro-USB charging port;
Short circuit protection;
Low voltage warning;
High temperature alarm function;
Powered by 1 x 18650 battery (not included);
LED screen shows battery level, temperature, wattage and resistance

 

[Gina3FVAPE]

Delight X1 Style Mechanical Box Mod $23.99

Main Info:
510 threading connection with fixed copper center pin;
Stainless steel connector;
Wooden mechanical box mod;
Powered by 2 x 18650 batteries (not included);
Copper contacts;
Full mechanical mod;
Magnet back cover

Dragon Style Mechanical Box Mod $36.99

Main Info:
510 threading connection;
Brass connector and battery cover;
Powered by 2 x 18650 batteries (not included);
2 air holes on the battery cover

 

[Gina3FVAPE]

 

[Gina3FVAPE]

Authentic Joyetech eGo One Atomizer

Main Info:
510 threading connection;
Liquid capacity: 1.8mL;
Resistance: 0.5 ohm / 1.0 ohm;
Airflow is adjustable;
Provide options, mouth inhale, mouth to lung inhale or direct lung inhale, it's all for you to choose

 

[Gina3FVAPE]

Authentic Innokin iTaste MVP 3.0 Pro + iSub G Tank Starter Kit


The Innokin iTaste MVP3.0 Pro is:

Ultra-Powerful: Fires 6~60W / 3~9V with a Maximum Output of over 17.5Amp.
The Longest Lasting: 4500mAh hour battery.
Intelligent: Vape Timer, Puff Counter, Integrated Short Circuit protection, Left / Right Screen Orientation, 15 Second cutoff & more.
Precise: RMS DC current accurate to a power deviation of 0.5W and fires from 0.2~3.1 Ohm.
Easy to use: 3 Buttons for Total, Precise, and Comfortable Control.
Always Ready: Charge the MVP 3.0 Pro with a standard micro USB cable and vape at the same time with Innokin's Vape while charging technology.
Trusted and Powerful: If you need to vape or need more time on your phone, always have power with the Innokin iTaste MVP 3.0 Pro.
Unique: Every iTaste MVP 3.0 Pro has an easily accessible unique ID on the board for easy product authentication.

More Info:
http://www.3fvape.com/ship-in-24hrs...silver-39v-660w-45ml-05-ohm.html#.Vb8D4LXHGjo

 

[Gina3FVAPE]

Kamry 20 2000mAh VW Box Mod

Main Info:

510 threading connector with floating center pin;
Variable Wattage: Wattage can be adjusted from 7W to 20W in 0 .1 watt increment;
Body is made of anodized aluminum;
OLED display shows battery charge status, voltages, resistance and wattage;
Micro-USB charging port;
Compatible with 0.3 ohm~3.0 ohm atomizers;
Input voltage / current: 3.2~4.3V / 1.5~7A;
Output voltage / current: 4~8V / 10A;
3 click switch;
Battery capacity: 2000mAh;
High temperature protection: If the device is over 70 degree the device, will shut itself down

http://www.3fvape.com/vv-vw-mod/504...-alloy-zinc-alloy-148v-730w.html#.VcAtzrXHGjo
Kamry 30W V1 2000mAh VW Box Mod

Main Info:
510 threading connection with spring-loaded center pin;
Variable wattage: Wattage can be adjusted from 7W to 30W;
Variable voltage: Voltage can be adjustable from 1.4V to 8.0V;
Battery capacity: 2000mAh;
Atomizer resistance: 0.3 ohm~5.0 ohm;
When the resistance downs to 0.3~2.1 ohms, the battery can rate up to 30 wattage;
Directly charging from the Micro USB port;
Clear screen displays atomizer resistance, Power, voltage and wattage;
Air holes on the bottom and side for large heat dissipation;

 

[Gina3FVAPE]

Incubus Style Mechanical Box Mod -- $32.99

Main Info:
510 threading connection;
Anodized T6 Aluminum case with grips;
Dual 18650 batteries in parallel (batteries not included);
Tool less reloading of batteries;
Unique gun "hammer" like firing switch;
Peek insulated switch with locking system;
Back to back design for left and right handed users

Evil Monk RDA -- $28.99

Main Info:
510 threading connection with brass silver plated contact pin;
316 Stainless steel;
Diameter: 22mm;
Height 14mm (without drip tip);
Unique Non-posts design;
Bottom airflow control with four big air holes;
Peek insulator;
Easy to do dual coils or quad coils;
White derlin drip tip and 510 adapter;
IVOGO patent design

 

[Gina3FVAPE]

Joker Mechanical Box Mod -- $26.99

The Joker Mechanical Mod come with a Joker logo on the wooden Mod body which makes the mod looks special. If you are a Joker fans, you can have a check via
http://www.3fvape.com/mechanical-mo...ny-aluminum-alloy-2-x-18650.html#.VcRNKbXHGjq

The main info:

Ebony wood body with aluminum alloy;
Dual 18650 batteries (batteries not included)
Copper contacts;
Unique Joker logo design looks like a sculpture art;
Air holes on the battery cover



Besides, the smoktech tfv4 sub ohm tank full kit is available on 3fvape.com. The full kit has accessories included which can help users have a better user experience with it.
For More Info: http://www.3fvape.com/clearomizer/5...teel-glass-5ml-245-diameter.html#.VcRbUrXHGjo

 

[Gina3FVAPE]

Melody Style 40W TC VW Box Mod -- $50.99


Main Info:
510 threading connection;
Variable Wattage: 1.0~40W;
Output Voltage: 1.0~9V;
Atomizer resistance: 0.1~2.0;
Temperature Control: 200'F~600'F;
OLED display screen: battery power, wattage, voltage, atomizer resistance;
Quickly click the fire button 5 times within 2 seconds to turn ON/OFF;
Powered by 1 x 18650 battery (not included)




KS Style Rebuildable Tank Atomizer

The KS style Tank is a copy from authentic one which comes with a very interesting design.

Main Info:
Juice flow control via drip tip;
A threaded cap for refilling;
Adjustable AFC 2.5mm;
To center KS with box mod adjust 510 center pin;
Material: 303 Stainless Steel;
Posts Height: 9mm;
Distance Between Posts: 8.5mm;
Airflow Tube Height: 5mm;
Chimney inside diameter: 4.6mm;
Airflow Hole Diameter: 2.5mm

 

[thewanderernick]

Incubus Style Mechanical Box Mod -- $32.99

Main Info:
510 threading connection;
Anodized T6 Aluminum case with grips;
Dual 18650 batteries in parallel (batteries not included);
Tool less reloading of batteries;
Unique gun "hammer" like firing switch;
Peek insulated switch with locking system;
Back to back design for left and right handed users

I like this mod


Evil Monk RDA -- $28.99

Main Info:
510 threading connection with brass silver plated contact pin;
316 Stainless steel;
Diameter: 22mm;
Height 14mm (without drip tip);
Unique Non-posts design;
Bottom airflow control with four big air holes;
Peek insulator;
Easy to do dual coils or quad coils;
White derlin drip tip and 510 adapter;
IVOGO patent design

Incubus Style Mechanical Box Mod -- $32.99

Main Info:
510 threading connection;
Anodized T6 Aluminum case with grips;
Dual 18650 batteries in parallel (batteries not included);
Tool less reloading of batteries;
Unique gun "hammer" like firing switch;
Peek insulated switch with locking system;
Back to back design for left and right handed users

Evil Monk RDA -- $28.99

Main Info:
510 threading connection with brass silver plated contact pin;
316 Stainless steel;
Diameter: 22mm;
Height 14mm (without drip tip);
Unique Non-posts design;
Bottom airflow control with four big air holes;
Peek insulator;
Easy to do dual coils or quad coils;
White derlin drip tip and 510 adapter;
IVOGO patent design

 

[Gina3FVAPE]

@thewanderernick what can i do for you?

 

[Gina3FVAPE]

Delight Mech Mechanical Box Mod

Main Info:
Recessed 510 threading connection;
Adjustable copper center pin;
Head mounted firing button;
Powered by 2 x 18650 batteries (batteries not included);
Magnet back cover




571 Style RDA

Main Info:
510 threading connection with copper contact pin;
Built in fan below the deck for extra airflow;
Wide chuff cap top;
Stainless steel and glass construction;
Split positive post;
Tri post design;
Vertical air holes built into the deck

 

[thewanderernick]

@thewanderernick what can i do for you?

i thought i sent a message lol i just wanted to reply and say that mod looked nice and also to book mark this tread i will order from you when i am stateside

 

[Gina3FVAPE]

i thought i sent a message lol i just wanted to reply and say that mod looked nice and also to book mark this tread i will order from you when i am stateside

Got it. Any questions feel free to tag me please. I am always at your service.

 

[thewanderernick]

Will do Gina. I am seeing the prices look really good. So expect a future order out of me

 

[Gina3FVAPE]

Kangside series Box Mod, the kangside release a series box mod including kangside vamo box 25W mod, kangside luxury box 35W Mod and kangside mini 25W box mod. They are very small in size and can meet your different needs. More info via Kangside Mods


Kangside vamo box Kangside Luxury box Kangside Mini box

 

[Gina3FVAPE]

Personally, I think the Velocity RDA is pretty cute, just like the litter robot. How do you think?

3FVape.com has the velocity Mini Style RDA with 4 colors

Main Info:

510 threading connection with adjustable copper center pin;
Dual screw positive / negative posts;
Unique side mounted post screws;
Offset positive post (no center post);
Solid copper center pin;
Direct / indirect airflow adjustment;
Double o rings for a firm primary cap seal;
Primary cap lock tab for precision air slot alignment;
Wide bore drip tip;
Comes with 510 top cap for 510 drip tip (drip tip not included)