Hi Vaping Underground members, In this review i take a look at the Tigon Stick Starter Kit from Aspire. The Tigon Stick Starter Kit was supplied for the purpose of this review by Tina from Aspire.
https://www.aspirecig.com/aspire-kits/as...ts551.html
Introduction
Aspire and Innokin are probably the two manufacturers who's products have been the most successful when it comes to getting people to quit smoking. The Tigon is a real starter kit with the Tigon Tank being both a MTL and low wattage DL affair. Although ideal for beginners the Kit will be of great interest to low wattage restricted lung hit vapers and MTL vapers (a lot of low wattage DL vapers like me also MTL a percentage of the time so this is perfect for them). Coming in both Standard and TPD versions which have different size tanks and batteries, is the Tigon a Jack of all trades but the master of none or have Aspire hit it out of the ballpark? Let's find out!
___________________________________________________________________
In The Box
Contents:
3.5ml Standard Edition
1x Tigon Kit(3.5ml, 0.4ohm pre-installed)
1x Glass tube
1x Extra drip tip
1x Coil (1.2ohm)
10x O-rings
1x Warranty Card
1x User Manual
2ml TPD Edition
1x Tigon Kit(2ml, 0.4ohm pre-installed)
1x Glass tube
1x Extra drip tip
1x Coil (1.2ohm)
10x O-rings
1x Warranty Card
1x Screw adjustment tool
1x User Manual
___________________________________________________________________
Aesthetics and Ergonomics
The Tigon Kit came in the standard cardboard box with sleeve packaging that Aspire kits come in and on opening i was met by a matching battery and tank with very nice media blasted finish. I received the Blue version, it's also available in Stainless Steel, Rainbow and Black, all versions come with matching colour Tigon tanks. Starting with the tank and both top and base sections are smooth then between both top section and glass and the base section and glass we have narrow sections with very nicely machined fine knurling. The delrin drip tip covers the Stainless Steel ring on the top of the top cap so surrounding the drip tip is the delrin ring which is different and looks very nice. The base has a narrow slot just one side on the airflow control ring and both top and bottom of the tank steps out to a slightly wider central section where the glass tube sits. The battery section is quite plain but classy looking with the already mentioned media blasted finish. The front has a pill shaped fire button with translucent surround for the LED towards the top, near the bottom we have the Aspire trademark printed. The reverse has a micro USB port towards the top then the base is very shiny Silver with etched safety stamps. If you remove the tank the top of the battery has a mirror Silver finish with Gold plated, spring loaded 510. The build quality and finish is excellent and like with all tubular devices it's very ergonomic.
___________________________________________________________________
Tigon Sub-ohm Tank Specs and Features:
Size: 24.5 x 52mm (3.5ml standard)/23 x 49mm (2ml TPD)
Capacity: 3.5ml(standard edition)/2ml(TPD edition)
Coil: 0.4ohm Coil(23-28W), 1.2ohm Coil(10-12W)
Suitable for MTL & DTL vaping with two drip tips
Easy top filling system with child lock function (TPD Edition)
E-liquid sealing mechanism
Bottom precise airflow adjustment
Thread: 510
Colours: Stainless Steel, Blue, Rainbow, Black
___________________________________________________________________
Tigon Tank Overview
Everything about the Tigon tank impressed me, the build quality and finish is as good as with any tank i have used. The Tigon is for both MTL and low wattage restricted direct lung vaping and you get 2 drip tips one for each style, they are a standard 510 fitting so you can also use your own if you prefer. The top of the tank is flat and has the outer metal ring and inner stainless steel ring, between the 2 is a ring of delrin.
The tank has a childproof top-fill system that i like a lot, first you need to lift the top-cap up before sliding open by pushing where there is a little liquid drop symbol. The top cap slides open very smoothly revealing a fill port with self sealing silicon seal, when filling push your nozzle through the seal to fill when you remove the nozzle it reseals. To close the top-cap is just the reverse, slide shut and press down.
The glass is sealed with o-rings and is housed between the top fill section and the coil housing section at the bottom, to release the glass you need to unscrew the base and with no coil inserted use the supplied tool to separate the coil housing from the top section so the glass can freely be removed (you get a spare glass).
As mentioned the base unscrews from the coil housing and you just press fit the coil into the housing before screwing your base back on. The coil housing has 4 juice ports to allow the juice to get to the wicking holes on the coil, when you remove the coil it allows a metal section to lower and seal the juice ports so you can remove your coil even if the tank is full of juice, when a coil is inserted it pushes the metal section upwards re-opening the ports.
The Tigon doesn't have juice flow control so you can close the ports when filling but i like the way the ports seal when removing the coil and i suppose having both systems isn't doable (or is it?). The base has a single airflow control which is a slot for DL and then if you keep turning changes to a series of 5 small holes so you can MTL from very airy to super tight. I received the TPD version Kit so the capacity is 2ml and at it's widest point the tank is 23mm, the standard version has a 3.5ml capacity and at it's widest point the diameter is 24.5mm. As mentioned you receive both a MTL and DL coil with the kit, the MTL is 1.2ohm and rated between 10-12w and the DL is 0.4ohm and rated between 23-28w.
___________________________________________________________________
Tigon Stick Battery Specs and Features:
Size: 24.5 x 142mm (3.5ml standard)/23 x 123mm (2ml TPD)(includes tank)
Battery: Built-in 2600mAh(standard edition)/1800mAh(TPD edition)
Output Voltage: 3.3-4.2V
Continuous Firing Time: 10s
Stick pen-style sleek design
Direct Output
Output Voltage: 3.3-4.3v
Thread: Spring loaded 510
Colours: Stainless Steel, Blue, Rainbow, Black
___________________________________________________________________
Review Continued Below:
https://www.aspirecig.com/aspire-kits/as...ts551.html
Introduction
Aspire and Innokin are probably the two manufacturers who's products have been the most successful when it comes to getting people to quit smoking. The Tigon is a real starter kit with the Tigon Tank being both a MTL and low wattage DL affair. Although ideal for beginners the Kit will be of great interest to low wattage restricted lung hit vapers and MTL vapers (a lot of low wattage DL vapers like me also MTL a percentage of the time so this is perfect for them). Coming in both Standard and TPD versions which have different size tanks and batteries, is the Tigon a Jack of all trades but the master of none or have Aspire hit it out of the ballpark? Let's find out!
___________________________________________________________________
In The Box
Contents:
3.5ml Standard Edition
1x Tigon Kit(3.5ml, 0.4ohm pre-installed)
1x Glass tube
1x Extra drip tip
1x Coil (1.2ohm)
10x O-rings
1x Warranty Card
1x User Manual
2ml TPD Edition
1x Tigon Kit(2ml, 0.4ohm pre-installed)
1x Glass tube
1x Extra drip tip
1x Coil (1.2ohm)
10x O-rings
1x Warranty Card
1x Screw adjustment tool
1x User Manual
___________________________________________________________________
Aesthetics and Ergonomics
The Tigon Kit came in the standard cardboard box with sleeve packaging that Aspire kits come in and on opening i was met by a matching battery and tank with very nice media blasted finish. I received the Blue version, it's also available in Stainless Steel, Rainbow and Black, all versions come with matching colour Tigon tanks. Starting with the tank and both top and base sections are smooth then between both top section and glass and the base section and glass we have narrow sections with very nicely machined fine knurling. The delrin drip tip covers the Stainless Steel ring on the top of the top cap so surrounding the drip tip is the delrin ring which is different and looks very nice. The base has a narrow slot just one side on the airflow control ring and both top and bottom of the tank steps out to a slightly wider central section where the glass tube sits. The battery section is quite plain but classy looking with the already mentioned media blasted finish. The front has a pill shaped fire button with translucent surround for the LED towards the top, near the bottom we have the Aspire trademark printed. The reverse has a micro USB port towards the top then the base is very shiny Silver with etched safety stamps. If you remove the tank the top of the battery has a mirror Silver finish with Gold plated, spring loaded 510. The build quality and finish is excellent and like with all tubular devices it's very ergonomic.
___________________________________________________________________
Tigon Sub-ohm Tank Specs and Features:
Size: 24.5 x 52mm (3.5ml standard)/23 x 49mm (2ml TPD)
Capacity: 3.5ml(standard edition)/2ml(TPD edition)
Coil: 0.4ohm Coil(23-28W), 1.2ohm Coil(10-12W)
Suitable for MTL & DTL vaping with two drip tips
Easy top filling system with child lock function (TPD Edition)
E-liquid sealing mechanism
Bottom precise airflow adjustment
Thread: 510
Colours: Stainless Steel, Blue, Rainbow, Black
___________________________________________________________________
Tigon Tank Overview
Everything about the Tigon tank impressed me, the build quality and finish is as good as with any tank i have used. The Tigon is for both MTL and low wattage restricted direct lung vaping and you get 2 drip tips one for each style, they are a standard 510 fitting so you can also use your own if you prefer. The top of the tank is flat and has the outer metal ring and inner stainless steel ring, between the 2 is a ring of delrin.
The tank has a childproof top-fill system that i like a lot, first you need to lift the top-cap up before sliding open by pushing where there is a little liquid drop symbol. The top cap slides open very smoothly revealing a fill port with self sealing silicon seal, when filling push your nozzle through the seal to fill when you remove the nozzle it reseals. To close the top-cap is just the reverse, slide shut and press down.
The glass is sealed with o-rings and is housed between the top fill section and the coil housing section at the bottom, to release the glass you need to unscrew the base and with no coil inserted use the supplied tool to separate the coil housing from the top section so the glass can freely be removed (you get a spare glass).
As mentioned the base unscrews from the coil housing and you just press fit the coil into the housing before screwing your base back on. The coil housing has 4 juice ports to allow the juice to get to the wicking holes on the coil, when you remove the coil it allows a metal section to lower and seal the juice ports so you can remove your coil even if the tank is full of juice, when a coil is inserted it pushes the metal section upwards re-opening the ports.
The Tigon doesn't have juice flow control so you can close the ports when filling but i like the way the ports seal when removing the coil and i suppose having both systems isn't doable (or is it?). The base has a single airflow control which is a slot for DL and then if you keep turning changes to a series of 5 small holes so you can MTL from very airy to super tight. I received the TPD version Kit so the capacity is 2ml and at it's widest point the tank is 23mm, the standard version has a 3.5ml capacity and at it's widest point the diameter is 24.5mm. As mentioned you receive both a MTL and DL coil with the kit, the MTL is 1.2ohm and rated between 10-12w and the DL is 0.4ohm and rated between 23-28w.
___________________________________________________________________
Tigon Stick Battery Specs and Features:
Size: 24.5 x 142mm (3.5ml standard)/23 x 123mm (2ml TPD)(includes tank)
Battery: Built-in 2600mAh(standard edition)/1800mAh(TPD edition)
Output Voltage: 3.3-4.2V
Continuous Firing Time: 10s
Stick pen-style sleek design
Direct Output
Output Voltage: 3.3-4.3v
Thread: Spring loaded 510
Colours: Stainless Steel, Blue, Rainbow, Black
___________________________________________________________________
Review Continued Below: