Cloud Pics! Post em up!

[smacksy]

I personally like my parallel 26650 box mod. I've been using .08ohm dual coil for two weeks on it. My batteries will last me an entire day until I go home and for a few hours at home. Lol, you should compromise. Dual parallel 26650s run in series. No such thing as unnecessary, lol. Double your voltage, quadruple your amp limit.

I have the copper BFM already and absolutely love it..my brother has the dual 26650 (parallel) box mod from VosVape..my clouds are damn near as big as his with my single 26650 copper BFM..two 26650's in series might be too much, but its worth thinking about...lol

from Droid Maxx using Tapatalk

 

[Rommel]

Cloud video. Details in the description.

EDIT: LOL, Maestro Vapes is apparently featuring in this also... Gotta remember to turn those off when recording.

 

[MrScaryZ]

View attachment 455 View attachment 457

 

[Rommel]

Another one. Did a few improvements later on, wrapped around 3mm screwdriver to improve wicking. Yeah, clouds bro. Not clouds for days as my battery can only manage about 20 good pulls... But in the competitions thats more than i need.

 

[smacksy]

Another one. Did a few improvements later on, wrapped around 3mm screwdriver to improve wicking. Yeah, clouds bro. Not clouds for days as my battery can only manage about 20 good pulls... But in the competitions thats more than i need.

What RDA and build are you using?
What does the ohm meter read?

from Droid Maxx using Tapatalk

 

[Rommel]

Dual 22 gauge sleeper parallels @ 0.08 ohms on Doge. Did four wraps around 3mm screwdriver.

 

[MrScaryZ]

 

[smacksy]

Dual 22 gauge sleeper parallels @ 0.08 ohms on Doge. Did four wraps around 3mm screwdriver.

Thanks, that build pulls about 52A/220 watts...sounds a little hot..I might give it a try in my zenith on my BFM..but the
26650 battery is only rated at 30A cont/50A pulse, and even at 3500 mAh
I don't think it would last more than a dozen pulls.. I don't participate in competitions but I do enjoy busting out some serious clouds sometimes..

Dual 22 gauge sleeper parallels @ 0.08 ohms on Doge. Did four wraps around 3mm screwdriver.

from Droid Maxx using Tapatalk

 

[Rommel]

Yeah, its a badass build. I use Sony 26650 batteries when messing with these, supposed to be 50 amp continuos. Nearly impossible to come by :/

 

[Rommel]

One second pull off my Doge. Cloud chasing with 100% mech setups is extremely intriguing and satisfying. Especially when someone with a God Box etc thinks they are blowing big clouds, you come around with a simple tube mech, small atty and absolutely fog the place. All about the skill of the builder, cant cheat by just pushing insane watts to half-assed builds. This is my thing.

 

[smacksy]

One second pull off my Doge. Cloud chasing with 100% mech setups is extremely intriguing and satisfying. Especially when someone with a God Box etc thinks they are blowing big clouds, you come around with a simple tube mech, small atty and absolutely fog the place. All about the skill of the builder, cant cheat by just pushing insane watts to half-assed builds. This is my thing.

I'm with you there, Rommel!
The right build on my simple tube mods
with a small RDA, like the zenith on my XXIX, blows huge, thick clouds..its truly amazing how a little 18650 mod can hit so hard! Its all about using the right build, least it's that way with me...


from Droid Maxx using Tapatalk

 

[jamieg71]

This is 15-20 foot floating away, (took it while walking my dog this am)
Billow RTA with a dual cyclops chimney build 24awg @.37ohms on a Sigelei @ 35w

 

[Rommel]

Does this count?

 

[trpxcst]

Mini cloud from the couch watching the TVA Show Live. Dual 26ga 7 wrap on a 5/64". Trident with airflow drilled to 3/32", brass nemesis, and battery @ 3.77v.

 

[CloudPusher]

 

[Unknown Rockstar Vapors]

Cloud Comp in Miami

How to Win:
1. Get a dope box
2. Wrap some dope coils
3.

 

[KeyserSoze]

Love all these cloud pics. I'll throw a few in the mix.

I haven't built a "real" cloud chasing setup in a couple months but here are a couple shots of the last one.

DIY dual series 18650 Box w a MutationX, 26ga plain dual coils at 0.44 ohm. 19 amps.

Gotta try the video and screenshot method next time. Didn't have long enough arms for this shot. The density was real. Been trying to replicate this vape with an IPV3 ever since. It can't be done.

 

[KKen]

 

[comatoast1995]

How do I post stuff?!

 

[smacksy]

How do I post stuff?!

You talking about posting a pic maybe?

sent from my Droid Maxx via Tapatalk

 

[ArrogantBastard]

Ipv mini2 70watt at 31.5watts. CCI RDA

 

[Brian Chen]

Wow, some amazing clouds on here! Does the e-juice matter for milky clouds? Is there a brand or flavor that is best? Thanks guys

 

[smacksy]

100% VG has always worked good for me...

from my Droid Maxx via Tapatalk

 

[derickedge7]

 

[VapeTechnologies]

Ok I'll play.




If I had to "classify" myself, I'm more into flavor chasing. But clouds are fun too!

great pics ladies and gentlemen! @shooter03 got some monster clouds! Wonder if the accuWeather satellites picked those up

 

[VapeTechnologies]

Wow, some amazing clouds on here! Does the e-juice matter for milky clouds? Is there a brand or flavor that is best? Thanks guys

High VG juice tends to make thicker clouds, and the PG acts as a flavor carrier. A good percentage for clouds would be around 80/20 (VG-PG). Some people use 100% VG but with a pure VG juice the flavors only start coming out after steeping for a while. I make our juice 80/20 and usually can vape it immediately after mixing, then after a few days it just gets better in flavor. Just look for juices that state "high VG blend" or 80/20 blends.

 

[smacksy]

I noticed any PG in my juice makes my coils pop and crackle like crazy....I got spit back burning my tongue using the chuff cap on my dark horse for clouds...Now I use VG max without the spit back or the snap crackle and pop issues..

from my Droid Maxx via Tapatalk

 

[smacksy]

Flavor is intense exhaling thru my nose but it makes me sneeze sometimes! Lol

from my Droid Maxx via Tapatalk

 

[smacksy]

High VG juice tends to make thicker clouds, and the PG acts as a flavor carrier. A good percentage for clouds would be around 80/20 (VG-PG). Some people use 100% VG but with a pure VG juice the flavors only start coming out after steeping for a while. I make our juice 80/20 and usually can vape it immediately after mixing, then after a few days it just gets better in flavor. Just look for juices that state "high VG blend" or 80/20 blends.

I also read somewhere that PG is used to thin out thick VG for use in tanks like the ProTank anything to avoid dry hits because those little coils don't wick VG max very well at all...don't know for sure, .I drip 100% VG and use it in my Arctics ...just sayin

from my Droid Maxx via Tapatalk

 

[VapeTechnologies]

I also read somewhere that PG is used to thin out thick VG for use in tanks like the ProTank anything to avoid dry hits because those little coils don't wick VG max very well at all...don't know for sure, .I drip 100% VG and use it in my Arctics ...just sayin

from my Droid Maxx via Tapatalk

Yes it does that too, but for clouds (which this thread is about) I figured that thinning out juice sounds a little irrelevant

 

[smacksy]

Yes it does that too, but for clouds (which this thread is about) I figured that thinning out juice sounds a little irrelevant

Agreed......but hey, nobody's perfect staying on topic sometimes.... And to clarify a little I blow my biggest and best clouds with a custom mixed 100% VG juice from my local shop... Just sayin

from my Droid Maxx via Tapatalk

 

[High On Octane]

Just picked up a iPV Mini 2 70 watt box and Herkales sub-ohm tank. Running 50 watts right now.

 

[VapingRandy56]

View attachment 3367

I've learned a thing or two in the past few weeks and upgraded my clouds.

wow nice bro!!

 

[VapingRandy56]

Alright, no more choking out, and I think I tweaked me technique enough to see some results. As always, one 90 and one 45, from each side;
View attachment 3525
View attachment 3526
View attachment 3527
View attachment 3528
Now I need a hardware upgrade! Where's my Competition Doge?!

sick!!!!

 

[High On Octane]

My iPV Mini2 and Herakles at 70 watts.

 

[smacksy]

My iPV Mini2 and Herakles at 70 watts.
/Screenshot_2015-04-16-06-54-21-1_zpspswcstkl.png[/IMG][/URL]

Your pic looks like it didn't post as this screen shot shows..lol

from my Droid Maxx via Tapatalk

 

[High On Octane]

Thanks, should be fixed now.

 

[smacksy]

Thanks, should be fixed now.

No problem, but I still can't pull up your pic... This is I why I use the Tapatalk app ..it makes posting a pic a snap...oh well..would've liked to seen your cloud though... I will try again later..

from my Droid Maxx via Tapatalk

 

[High On Octane]

Weird, I'm using TapaTalk and I can see the pic.

 

[smacksy]

Weird, I'm using TapaTalk and I can see the pic.

Yeah, that is sorta weird. Lol....on my posts you can see the Tapatalk signature line..

This pic was posted earlier via Tapatalk..and repeated here via Tapatalk.. Tapatalk works good posting documents, videos and pics better for me than the stock VUF format...

from my Droid Maxx via Tapatalk

 

[smacksy]

My iPV Mini2 and Herakles at 70 watts.

Pretty good cloud using a tank! ....I have the Arctic/IPV3 and with the .2ohm coil at 65w and can't blow clouds as big as yours with the Herkales.. (However my mechs and RDA's are king of the clouds..lest they are for me...lol)

from my Droid Maxx via Tapatalk

 

[tinman1177]

ipv3, 1.4ohm standard single microcoil, doge v2 from congrevape, 30 pg/70 vg juice vaping at 36.3w on 2 day old batteries
think ive found my zen zone haha. excellent flavor, as far as clouds let me know how im doing. more of a flavor chaser but i feel like this little box and doge are chucking some decent clouds.

 

[smacksy]

Looks good!

from my Droid Maxx via Tapatalk

 

[Chris Knudson]

Someone took this pic while I was playing around with my mod, Custom unregulated series box with Rampage rda triple macro .3 ohms

 

[KeyserSoze]

Someone took this pic while I was playing around with my mod, Custom unregulated series box with Rampage rda triple macro .3 ohms

Hooray for series! 0.3 is pretty low... over 200W! I like it. What gauge/wraps/type of wire and wick were you using?

I gotta get me some MOSFETs so I can mess around with unregulated boxes again. I have a homemade dual series 18650 but its just dying to weld a switch (no FET or fuse even). I keep trying to come up with a way to mount the 4nine button on top of a 1590G for a real mech box but a small momentary switch and MOSFET are easier to place. First world problems...

 

[smacksy]

IPV3/Dark Horse with dual 24g kanthel micro coils/organic cotton at .25 ohms
Cool, thick vapor at 60w on the IPV3.
Wide open airflow with the chuff cap..
This build is a juice hog! Lol

sent from my XT1080 via Tapatalk

 

[Vysium]

Dual 22 gauge 5 wrap 2.5mm on Doge V2 RDA / Limitless Mod

 

[VaporIQ]

I look like Santa Claus haha.

You have a beautiful umm eye

 

[VaporIQ]

Probably shouldn't cloud and drive

 

[KeyserSoze]

Dual 22 gauge 5 wrap 2.5mm on Doge V2 RDA / Limitless Mod

Awesome pic!