G-PRIV2 Choose bad resistance

[Sauryy]

Hello, i get some problem about my G-PRIV 2 and TFV12 atty,
today i installed X4 head and when i ON the mod, the mod give me question if is installed new coil, but there wasnt my Ω only 0,2xΩ and 0,17Ω but my coil head have 0,15Ω
- how i can please change the resistance?

Thanks for answers.

 

[Pastorfuzz]

If I read your post correctly, you can't change your resistance (ohms) with your mod.
The factory coil head is built to a certain resistance (Ohms).
If you want to change the resistance, you have to use a different coil of a different ohm rating.
Some of the regulated mods ask " New Coil" Yes/No" when the atomizer or batteries were removed.
If you change your coil, always select "Yes"
Factory coils are not always precise on the claimed ohms printed on them.
Some mods can read the Ohms incorrectly by a small amount also.
The mod you are using is Regulated so you should not have any problem.
Hope this helps.

 

[Pastorfuzz]

If I read your post correctly, you can't change your resistance (ohms) with your mod.
The factory coil head is built to a certain resistance (Ohms).
If you want to change the resistance, you have to use a different coil of a different ohm rating.
Some of the regulated mods ask " New Coil" Yes/No" when the atomizer or batteries were removed.
If you change your coil, always select "Yes"
Factory coils are not always precise on the claimed ohms printed on them.
Some mods can read the Ohms incorrectly by a small amount also.
The mod you are using is Regulated so you should not have any problem.
Hope this helps.

 

[Sauryy]

Thanks for the answer. Yea this really helped me.