brian yaeger
Member For 4 Years
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
HAPPY HALLOWEEN VAPING PUMPKIN
Posted by brian yaeger on 10/25/2014 to Electronic Cigarette News & Story's
More Sharing ServicesShare|Share on facebookShare on myspaceShare on googleShare on twitter
HAPPY HALLOWEEN
Ever wondered how to out due your neighbors on Halloween. Well, here is a nifty trick using an e-cigarette that will surely put you one step ahead of your competition. You now can turn your pumpkin into one great fog machine.
1. Unscrew the clearomizer’s chamber and battery case from its metal base. Run a pin or needle through the center of the base, then remove it. Fill the chamber with fog juice and screw it back to the base.
2. Break the battery case to separate the metal connector. Taking care not to touch the wires and create a short circuit, cut away the battery. Then clean out the connector, removing and discarding the circuit board, any plastic pieces, the o-ring, and the central metal pin.
3. Solder the black wire, which will ground the device, to this connector.
4. Now take the unsealed connector and remove its o-ring and central pin. Solder the red wire to the pin, being careful not to block the hole. This will be the positive lead.
5. Insert the o-ring and the unsealed pin into the original battery connector. Screw the modified connector onto the base of the clearomizer.
6. Run the aquarium tubing up the red wire until it reaches the battery connector. Tape it securely in place so no air can escape. Snip a slit in the tubing and pull out the end of the red wire. Seal the slit with hot glue and secure with tape.
7. Attach the loose end of the tubing to the aquarium pump. Tape the free ends of the red and black wires into the positive and negative holes in the AC adapter. Turn on the power, then the air, and watch the smoke pour out!
Get the full set of instructions at: http://www.popsci.com/article/diy/create-smoking-pumpkin-e-cigarette
Posted by brian yaeger on 10/25/2014 to Electronic Cigarette News & Story's
More Sharing ServicesShare|Share on facebookShare on myspaceShare on googleShare on twitter
HAPPY HALLOWEEN
Ever wondered how to out due your neighbors on Halloween. Well, here is a nifty trick using an e-cigarette that will surely put you one step ahead of your competition. You now can turn your pumpkin into one great fog machine.
1. Unscrew the clearomizer’s chamber and battery case from its metal base. Run a pin or needle through the center of the base, then remove it. Fill the chamber with fog juice and screw it back to the base.
2. Break the battery case to separate the metal connector. Taking care not to touch the wires and create a short circuit, cut away the battery. Then clean out the connector, removing and discarding the circuit board, any plastic pieces, the o-ring, and the central metal pin.
3. Solder the black wire, which will ground the device, to this connector.
4. Now take the unsealed connector and remove its o-ring and central pin. Solder the red wire to the pin, being careful not to block the hole. This will be the positive lead.
5. Insert the o-ring and the unsealed pin into the original battery connector. Screw the modified connector onto the base of the clearomizer.
6. Run the aquarium tubing up the red wire until it reaches the battery connector. Tape it securely in place so no air can escape. Snip a slit in the tubing and pull out the end of the red wire. Seal the slit with hot glue and secure with tape.
7. Attach the loose end of the tubing to the aquarium pump. Tape the free ends of the red and black wires into the positive and negative holes in the AC adapter. Turn on the power, then the air, and watch the smoke pour out!
Get the full set of instructions at: http://www.popsci.com/article/diy/create-smoking-pumpkin-e-cigarette