Is Battery Safe for My Build?

[jmcostales]

So I have an RX75 with a Ziggs RDA sitting on top of it. I run a dual coil 26ga Kanthal build at 4 loops each, which clocks in at .12 ohms. I am using an LG 18650HG2, and vape at 30 watts with the screen showing 1.9 volts.

Question: Is my battery safe for my setup? What is best build for this battery?

Thanks!

 

[conanthewarrior]

So I have an RX75 with a Ziggs RDA sitting on top of it. I run a dual coil 26ga Kanthal build at 4 loops each, which clocks in at .12 ohms. I am using an LG 18650HG2, and vape at 30 watts with the screen showing 1.9 volts.

Question: Is my battery safe for my setup? What is best build for this battery?

Thanks!

The build is perfectly fine as you are using a regulated mod-watts are the deciding factor in amp load on your batteries, not resistance in this scenario.

At 30W, you are pulling 9.3 A from your battery at cut off voltage. This is before chip efficiency comes into play, but you are well within the limits of your battery at this level.