donnierocker1983.dg
Member For 1 Year
I ordered 20ga. Ss is that gonna be a bad idea for a new builder?
Sent from my SAMSUNG-SM-G891A using Tapatalk
Sent from my SAMSUNG-SM-G891A using Tapatalk
thank you so much. I thought i had one ready to blow up the other day with some 22kenthol so i figured I'd learn more before I decided to mess with any more rba'sI would definitely get a coil calculator and ohms law calculator. Check out steam-engine.org or an app called Vape tool on Android. For a dual set-up you'll have to have 10 warps to barely get over .1 ohms. That's really low. If you're using a mech is down right close to dangerous. Need a great battery. Sony vtc5a would be a prime choice.
Sent from my LM-Q610(FGN) using Tapatalk
I had a double 8 wrap using it in wattage mode on a smok x-priv 22ga. Ken on this tankYour resistance will be very low with that wire. It would take a 8/7 wrap to get 0.1 Ohms in a single coil. With a dual coil the same wrap would be 0.05 Ohms and not a lot of mods can run that low even in TC. I would suggest 24, 26, and 28 gauge for starting out.
http://www.steam-engine.org/ is your friend! Here is a how to on using it: http://vapingunderground.com/threads/the-official-steam-engine-thread.389510/
Perfect I will check that out. Thanks again I've been a fan of the page for about a month while learning my flavors you guys are very helpful figured on something like this I just felt trust towards you guys so I figured I'd join to keep mine from blowing my face off. I will read up aches chime back with any questions. Thank youYour resistance will be very low with that wire. It would take a 8/7 wrap to get 0.1 Ohms in a single coil. With a dual coil the same wrap would be 0.05 Ohms and not a lot of mods can run that low even in TC. I would suggest 24, 26, and 28 gauge for starting out.
http://www.steam-engine.org/ is your friend! Here is a how to on using it: http://vapingunderground.com/threads/the-official-steam-engine-thread.389510/
Plenty if people here that love to help. Face blown off is not an option if we can help. LolPerfect I will check that out. Thanks again I've been a fan of the page for about a month while learning my flavors you guys are very helpful figured on something like this I just felt trust towards you guys so I figured I'd join to keep mine from blowing my face off. I will read up aches chime back with any questions. Thank you
Sent from my SAMSUNG-SM-G891A using Tapatalk
I DIY as well and I get excellent flavor with 0.3 Ohm coils, but I do rock some 0.1 Ohm coils as well. You don't always need to rock super low Ohm coils to get flavor. Learn Ohm's Law, learn basic coil building, you gotta learn to walk before you can run.I guess I jyst don't really know what im doing or what any of this means. I make my own juice after a20 plus year habit and I just want the most from my flavor.
Sent from my SAMSUNG-SM-G891A using Tapatalk
See that's where I'm lost that entire keep in mind part I did download the app someone had mentioned earlier and it seems to be pretty legit as long as I keep it above .15 I should be good correct?10 wraps around a 3mm jig will get you 0.1 ohm with dual coils
just use a regulated mod, and check out http://www.steam-engine.org/wirewiz.html - keep in mind it does single coils, so halve your resistance for duals
not needed for regulated mods, but an easy ohms law calculation for battery safety is voltage divided by resistance equals amps
also how do I know if I have a regulated mod? This is what I have in my arsenal at the moment. I like to switch flavors a lot.See that's where I'm lost that entire keep in mind part I did download the app someone had mentioned earlier and it seems to be pretty legit as long as I keep it above .15 I should be good correct?
Sent from my SAMSUNG-SM-G891A using Tapatalk
also how do I know if I have a regulated mod? This is what I have in my arsenal at the moment. I like to switch flavors a lot.
Sent from my SAMSUNG-SM-G891A using Tapatalk