plume veil recommended build

[jsr27]

I'm using a plume veil and am almost upset about the vapor production. What detailed coil build is gonna give me more vapor? I'm using a IP v2 if that makes a difference. What ohm do y'all recommend for this set up. I'd like it to fire up faster than slow. What should I do? Thanks for any help!

 

[nabibrian]

Try reading about it on this thread:
http://vapingunderground.com/threads/plume-veil-new-builder-first-build.23302/

 

[AZ4running]

For more cloud i would do dual macro coils wraped with a 3mm or 1/8inch bit at 12-15 wraps on each coil, that you get you around .4-.5 ohms using 22g kanthal. You want a larger coil for more cotton inside the coil, more coil to juice contact.

 

[iLiptiKal]

I built a simple parallel for a buddy of mine, which has good flavour and vapour. Two strands of 24gA1, 2.5mm inner diameter, 7 wrap, 0.15 ohm


Sent from my iPhone using Tapatalk

 

[TheGingerSquatch]

I use a dual parallel build of Kanthal A1 26G, 7 wraps around a #1 screwdriver from the junk screwdriver special at the hardware store. It equates to about a 5/64ths or a 3/32nds and comes out to about .25 ohms. This build gives me great flavor and chucks clouds all day long. It's so good, I wound another one as an emergency coil for when my Fused Clapton in the Project Sub-Ohm Swirlfish RDA wears out.