after that I'll try the staggerton hehe
New Bench! Along with new photoshoot stuff and chair! Took a while to clean the office all out for all the stuff and put it all together but now instead of having a 2ft x 4ft shelf to work in I have a 6.5ft workbench with velour laid drawers and a wise at the end. I think Im going to bolt down my swivels to the vise jaw so I can increase my wire length room by a foot if I wanted to (for wholesale activities)
I want to take off the photoshoot stuff and make its own bench on the back wall to free up the bench more but for now this is great....everything in one spot and plenty of room for both.
Some new stuff...
Quad Interlock Aliens...Ive only seen 3 other people make these and let me tell you, they are a nightmare, even with the tricks I used to pull it off.
Some Hybrids:
Omg those quad interlocked aliens are AMAZING!!! Love the workspace you have set up too it shows great attention to detail. Thanks for sharing. I can learn alot from that picture.New Bench! Along with new photoshoot stuff and chair! Took a while to clean the office all out for all the stuff and put it all together but now instead of having a 2ft x 4ft shelf to work in I have a 6.5ft workbench with velour laid drawers and a wise at the end. I think Im going to bolt down my swivels to the vise jaw so I can increase my wire length room by a foot if I wanted to (for wholesale activities)
I want to take off the photoshoot stuff and make its own bench on the back wall to free up the bench more but for now this is great....everything in one spot and plenty of room for both.
Some new stuff...
Quad Interlock Aliens...Ive only seen 3 other people make these and let me tell you, they are a nightmare, even with the tricks I used to pull it off.
Some Hybrids:
YEAH thats what i wanted to read!Ok staple staggered fused clapton it is
Got to figure out what I'm gonna do it all with first so I can make less wraps those helixs were monsters!
Do you think we should tell OhmBoy Josh about how we managed to perfect the button trick, or just let him enjoy his uneven spacing?Well my 3rd attempt at the staggered fused clapton thanks for the button update @Carambrda worked a treat this time
Used 2x28g cores 316L, spaced wraps 38g 316L
Final fused wrap 38g 316L
Used a 2.5mm diameter and 7 wraps...These should ohm out about 0.37 each gonna put them into the pindad and white bone mini I think
View attachment 78511
View attachment 78511
LoL!Do you think we should tell OhmBoy Josh about how we managed to perfect the button trick, or just let him enjoy his uneven spacing?
which was my own sometime ago 
Haha, I like #2 cause it's what I've been stuck on forever.Right onto the next coil type what shall I try next?
1) staggerton
2) alien coils (I'm yet to make enough for two decent coils)
3) dragon skin
4) tiger coil
5) stitched something or other
6) something else I haven't listed
Can't do anything corrugated yet don't have anything to corrugate them with at the moment
Nice work mate
) ribbon.
I find them a PITA to make in all honesty at the moment cudos to those who knock em out like candy
Staggerton Day
Made a Set of Spaced Staple Staggertons.
8 ply 0.3 ribbon, 28GA Frames and 38GA Fuse.
Made all the spacing by hand.
6 Wraps @ 3mm maybe 0.12 Ohm Dual.
View attachment 78527
As i got bored made some CSSFC After that, just in case. Just kidding, made them for my buddies new Coilart Mage RBA
View attachment 78528
Yeah that's what I'm thinking too, is because it was pretty much square it ''rolled'' around the button but any bigger will probably kink the ribbon. Will probably just try the stagger with the goon barrel and cap as a weight. The final fuse is easier for me than the SSFC though which is what I was pondering on, after doing those for like 2 weeks straight and getting two sets. Will try more tomorrow, build on peeps.Nice work mate
I would recommend to use the oldschool loop method for that, either with a spare finger (like I do) or a weight.
I love the button method for staggering, but tried it with 0.3 n80 ribbon and totally failed.
The wire through the button had to be to tight, and faster than I could react I had some neat twisted and messed (twisted messes?
Simple math.... When you took 4ply of 0.4x0.1 ribbon then your staple has a perfect square in diameter since it is exact 0.4x0.4 mm.
I guess that's the reason why it worked.
Im not sure on how I did it that time...right after posting them I attempted a 5 strand interlock and I failed, then after that I tried a 3 strand and couldnt do it either...that single attempt may be the only attempt that ever works....I have a bunch of coils that I did for the livestream tonight that Im going to take some quick shots of tomorrow though.Raymo your work is outstanding! Those quads are something else how do you even tame all of that lot from twisting up?
Nice work area
Get 2 ziplock bags a little bigger than ur spools are, drop both spools in the back and zip it half closed or so. Drop them to the floor and paraclap the 2 wires by hand. Correct me if im wrong @raymo2u
Great work man ! Wish my First attempts would have Looked that Good. You nailed it
I've found the same thing to be true about the 4ply .4 ribbon with SSFC and staggertons so far. I feel like being square seems to make it easier for the ribbon to roll around inside the frames. Tried a 6ply and it was easier to hold together without twisting inside, though too much pressure on the wrap wire and the frames can get wonky. Nice job on the SSFC!
That's just great! The Gargoyle Hoof is probably my favorite vid that those two did LOL
Awsome!Im not sure on how I did it that time...right after posting them I attempted a 5 strand interlock and I failed, then after that I tried a 3 strand and couldnt do it either...that single attempt may be the only attempt that ever works....I have a bunch of coils that I did for the livestream tonight that Im going to take some quick shots of tomorrow though.
For those playing with paraclap should try my ziplock technique if you havent already...then try staggering 4ply .4 or .4 ribbon and then play with the staggered ribbon as a frame for some added possibilities.
Some ideas:
.
Awesome job !!! Looks really good, I'm not there yet, still learning to work with that darn ribbon wire. LOL
I really struggled with the ribbon too. The biggest problem i had was straightening it. No I just use what comes on bigger spools like Kindey Puncher. If needed give it a nice firm pull and your feel it strech and straighten out.
thanks
yeah 30/40 aliens is a tough build at first. it really helps you refine your techniques though. my first try was full of lumps and blips. my second was a fail. my third was not perfect but i got a nice pic of it, and the rest have been like this. for some reason i still get really stressed out about sitting down to build them though 
thanks
i really like it with ka1 cores and a couple extra wraps on unregulated series too. this is the first time i tried ss in this config for a single battery mech. its a bit cool but it lights up very fast and still gives a pretty nice vape. should be easy on the battery in my squonker for going out and about. i might try it with one less wrap, or at 2.5mm and see if its a bit hotter for a regular tube...
fuckyeah nicely done
too bad for you, now you have to color those coils, tell us how they vape and give us a review on the skill rda...hope you didnt have plans...
hahaw are you shitting me? you just made a perfect set of coils and were typing out a message saying that you were waiting for that to arrive, and it arrived? epic timing. glorious
Lookin good! Gotta get that RDA. I'm finally to the point were i can wind 12" of Alien without a bobble. I use Mterks process with one exception. I still use a clamp in the middle. I figure stopping and starting up at that point is no biggie cause if i get a little mess up it will wont matter. The clamp is still a crutch i need till my prep work gets better.
Good tip. Thats the only thing i dont like my Doode clone Top and tip gets down right hot.
Wow! Those coils are absolutely perfect. Good job!
