Resistivity of N90

[Exodus_]

Recently picked up the Alliance V2+ dripper and they threw in a sample of Omega N90 wire. I'm using steam-engine to calculate my resistance and wraps right now but the highest nichrome on the site is 80. Anybody know the resistivity for N90?

 

[PhantomOp]

So far, this is all i've found on that Omega wire

Resistance per inch:
20g- 0.04 Ω
22g- 0.05 Ω
24g- 0.07 Ω
26g- 0.09 Ω

 

[PhantomOp]

Here is the manufacturers spec page
http://www.omega-wire.com/nickel-alloy-specification/

 

[HellbillyRJ]

So far, this is all i've found on that Omega wire

Resistance per inch:
20g- 0.04 Ω
22g- 0.05 Ω
24g- 0.07 Ω
26g- 0.09 Ω

Nichrome Series 80 Approximate Wire Resistance (ohms per inch):
- AWG 20g: 0.052ohms per inch (super low resistance)
- AWG 22g: 0.086ohms per inch (super low resistance)
- AWG 24g: 0.136ohms per inch (low resistance)
- AWG 26g: 0.221ohms per inch (low resistance)
- AWG 28g: 0.34ohms per inch (low/standard resistance)
- AWG 30g: 0.563ohms per inch (standard resistance)
- AWG 32g: 0.882ohms per inch (standard/high resistance)

That way you have a side by side comparison against N80

"Some people call me a redneck, and some people call me a hick, some people call me an asshole, and some people call me just dick. I'm a hellbilly."

HellbillyRJ

 

[martnargh]

Not a whole lot of info on n90 but I'll tell you that when I do a 21n90 mad rabbit build, 8 wraps dual coil on a 3mm bit will come out to .08...

Sent from my SM-N920T using Tapatalk