Getting ready to put my Siggy up for sale, along with my God Box
I was thinking of getting the sigelei 100 but then I seen the vicious ant clone kinda torn now but read a lot of good things about the 100 here. Any suggestions?
BEWARE!!! kanthal bits can and will get pulled in the vent holes on the bottom. This has happened to me a few times I'm afraid it will short out on day.
Khanthal flies everywhere when you clip the excess!For god's sakes man, clean your table!! lol
I think I'm just going to collect impossible to find wood boxes. Both boxes are up in the classies now
Khanthal flies everywhere when you clip the excess!
unless you walk with bare feet on the carpet....ouch.I know the pain. I work with a carpet floor. I will never find it all.
@Cisco Trujillo -Here is another place, if your interested in the Sigelei 100 watt - http://www.ebay.com/itm/171522822393?_trksid=p2059210.m2749.l2649&var=470543323476&ssPageName=STRK:MEBIDX:IT
It says "Silver" but I landed a nice black one!
Stick a Neodymium magnet on your clippers. No more pieces of wire flying.Khanthal flies everywhere when you clip the excess!
Use this link on eBay to purchase a 3 year warranty if you got it there for $15.
http://www.ebay.com/itm/270826537628?ru=http://www.ebay.com/sch/i.html?_from=R40&_nkw=270826537628&_rdc=1
Say "Thank You" VC!
I started using the battery door magnets to pick up the snipsStick a Neodymium magnet on your clippers. No more pieces of wire flying.
Thanks for doing the math for me... Was being lazy . I have no desire to go there anyway, just trying to see what I could push with my typical builds. 100 Watts is only what is usable if you build low enough, but I'm gonna get a better RDA finally and start building a bit lower. Might as well try, and I have a ton of good dripping juice ATM.FYI, would need 11 volts to get to 100W with 1.2. Would take a 3 battery device like the god box. Not that I would ever want 100 watts on 1.2 but the more you know.
As for the IVP3, personally I don't like the touch button but that's just me. I also love the magnets on the sigelei and customer service is nice. The only reason I could see going for the IVP3 besides the extra watts is either the push button or style points.
Man, I have the itch for a box mod now. I can't decide between the Sigelei 100 Watt, or the project sub ohm Thinman which is an IPV3. I don't need the 50 extra watts, so it more a matter of quality. I don't like the lack of magnets on the IPV3, but aside from that, it seems really nice. On the other hand, I can get the Sig, and 2 pairs of LG's for around $110, whereas the Thinman is $126 or so device alone. I could add a magma to the Sig and batts, and be at $126.
Don't know what to do. I also tend to vape kayfuns at 1.2 ohms, and I gather that resistance won't allow me to hit 100 Watts, not that I would want to. I'm unable to find out if the IPV3 has the same restrictions. I know you need to be .5 or lower to hit 100 on the Sig. I don't know what I'd actually be able to use at 1.2. I'm leaning towards the Sig, but I'm not gonna let it be because of cost. I want to get a device that I will like, and will last. I plan on holding on to this mod, and don't foresee the desire to get multiple like with mechs.
This is a Sig thread. Everyone seems pleased, any unbiased suggestions? Also, I have plenty of batts, but will need two pair to marry for the box. I usually go through GenuineCells, but can get 4 LG's with the Sig and a Magma from the ebay vendor linked by @VapinChevy Anyone with experience with this vendor, and batteries? I'm hesitant to stray from who i know I can trust on batts, though I have 8 LG's and feel confident in identifying them. I still would like to know if anyone has purchased batts from this vendor. I don't wanna have to wait for batteries while staring at a beautiful mod, but safety first. Any advice is appreciated! Thanks all! This damn site has made me get SOOO much vape gear, lol. This one is a birthday/holiday present, though, so it ain't my money. Lol.
Thanks for doing the math for me... Was being lazy . I have no desire to go there anyway, just trying to see what I could push with my typical builds. 100 Watts is only what is usable if you build low enough, but I'm gonna get a better RDA finally and start building a bit lower. Might as well try, and I have a ton of good dripping juice ATM.
I really am thinking the Sig. Now my only decision would be to wait for the Plus which has all magnets and a spring loaded 510. However, I then would wanna wait a bit to see if everything was reliable. Early adoption can be dangerous, and there will always be something new on the horizon. Then, do I wait for that? Lol. Also, assuming the V2 regular pin adjusts fairly easily, a spring loaded pin could be bad. Just a point of potential failure.
.
I was planning on LG's, I'm wary to trust this vendor for batteries, though. I'd just like to one stop shop, so to speak. Thanks for the warning, though. I think I can discern between a real or fake LG, just not sure it's worth the risk.Just a Heads UP!!!! The MXJO Batteries that many vendors sell are re-wraps! The MXJO 35A 18650's are 35A LG's & The MXJO 30A 18650's are 30A Sony VTC's!!! At least mine and many other's are
Seems like this one is a winner. Good to hear. I'm now just torn on waiting for the plus, but being a guinea pig worries me. That floating 510 is mighty enticing, though. I think I need to at least wait for Black Friday, there might be deals to be had.Got mine last Friday ( Sig ).. it's all what folks are saying, excellent device.
I sure seem to be chugging the juice though, like 30+mL a day ( and that's holding back ).. and I haven't vaped higher than 45W yet..
You're gunna like itPulled the trigger on a order for mine. Flavor chaser here, but like tanks, so using the Fogger 4.1(4.4). So only looking for 30w out of this thing, hope it behaves with my Fogger. Will be a nice upgrade from my 2 Vamo 5s....
I'm a tank and flavor chaser as well, of the kayfun variety, though . Haven't ordered it yet, but it's gonna happen soon.Pulled the trigger on a order for mine. Flavor chaser here, but like tanks, so using the Fogger 4.1(4.4). So only looking for 30w out of this thing, hope it behaves with my Fogger. Will be a nice upgrade from my 2 Vamo 5s....
I assume you pre ordered... Mind me asking where from. I'm thinking I'm gonna wait and get the plus, I hate adjusting 510 pins. Thanks!I pulled trigger on Sigelei 100 watt Plus & Sigelei 150 watt box mods ... Sigelei Box Mods 100% RECOMMENDED