Smok Alien kit?

Discussion in 'Regulated (Voltage / Wattage / 3.7v/ Temp Control)' started by CashNVape, Oct 12, 2016.

  1. CashNVape

    CashNVape Gold Contributor Member For 3 Years

    Blog Posts:
    1
    Joined:
    Aug 8, 2016
    Messages:
    3,722
    Where's the cheapest place to buy the black or gun metal gray smoke alien kit in China and the USA? Coupons?

    Sent from a phone
     
    Last edited: Oct 12, 2016
  2. Vapin4Joy

    Vapin4Joy Diamond Contributor Member For 4 Years

    Blog Posts:
    0
    Joined:
    Jul 17, 2015
    Messages:
    12,047
    Ecig.com had the best price I have seen, 49.99 with 2 LG HE4 batteries. Only available in the Blue. Seems the Gunmetal is in short supply everywhere.
    I constantly check ecig for when it arrives on their shelf.
     
    Deucesjack likes this.
  3. KDodds

    KDodds Silver Contributor Member For 2 Years ECF Refugee

    Blog Posts:
    0
    Joined:
    Aug 7, 2016
    Messages:
    1,266
    Check VaporDNA, Joe posted the sale on his blog. Fair warning, and don't know if it mine or all units...

    This mod is very flaky. It runs unbelievably hot in TC or VW. I built my Goon on it and within 6-10 chain vapes, the RDA is almost too hot to touch, as well as the top of the mod. So I thought maybe it was my build and tried it on another mod and it was fine. So I tried another RDA on the Alien, same thing. Also, unless it's warm already, the ramp up time is seconds, not milliseconds. When warm it's a bit shorter, but still about a full second, give or take. I haven't tried it with a tank yet, but so far the performance is not just lacking, but alarming in the heating aspect.
     
  4. CashNVape

    CashNVape Gold Contributor Member For 3 Years

    Blog Posts:
    1
    Joined:
    Aug 8, 2016
    Messages:
    3,722
    Report your findings too that J labs dude.
    And to smok maybe they'll release a firmware fix...

    Sent from a phone
     
  5. VapeVillian

    VapeVillian Bronze Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Feb 17, 2016
    Messages:
    356
    Yeah, that sounds like you got a defective unit. It's funny though, cuz I run my Goon with it as well with a .18 ohm dual alien @ 90-100w and I have no heat issues or ramp up problems at all. I have yet to see the PCB get above 41°C. Also threw on the XL with some staples and didn't have any problems with it as well, just think my Goon looks better on it

    Sent from my Nexus 7 using Tapatalk
     
    Vapin4Joy likes this.

Share This Page

Close This Message