Thanks - that helps. For <$3 and free shipping, I'll probably grab whatever looks like higher ohm mesh and give it a shot - in another month or two when I get another fasttech order....
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
Not tight enough to be called super tight, o-rings shredded, and I saw this yesterday -
This is daily use for 2 months, I still do like it but prefer Speed Revolution Mini for tight draw
Sorry Bear, mine vanished. Now I'll admit perhaps the vape gear I had on the table was multiplying. Since my daughter is coming in from college for Christmas, the wife decides to throw all my gear in a box and ziplocks to make things pretty. I've looked all over the place... boxes, bags and cabinets but it appears my gunmetal Etna has teleported. I guess it'll turn up eventually.
Or not.
Thank you for that, it sounds like a pass from me. That's too bad, they're only $10 at Vapor rage https://www.vaporrange.com/Digiflavor-ETNA-RDA-p/digi-etna-rda.htm
I know that feeling only too well. It will most likely show up while you're looking for something else.
The Pico/Nuppin combo is the best IMHO.Well I got my Profile. Actually, my first, as I ordered a second one before I had the first.
That was probably a mistake - as I have determined quite quickly that it's not gonna work for me on my mech squonkers.
I got it to use the mesh coils, and they're 0.18 ohms. If anyone knows of any mesh I could (fairly easily) throw in a Profile that runs more like 0.3 and up, please let me know. Because as I've found before - I can't vape below about 0.3. It's just too "hot" for a mech and the way I draw.
I have now experienced a hint of a mesh dry hit, and that's no good at all.
So I moved the Profile to my solitary regulated device - and it's vaping quite nicely there!
But I won't need the blue one that's en route. :-(
Also, that required some real topper swapping. I've not got a (also quite nice) QP Kali on my OG mech Pulse...which is weird. SEEMS like a mismatch, but...well...they're both really BIG, and again - it's vaping quite nicely.
These are now sort of my cloud-chucker setups.
The Profile does have plenty of air - which I was concerned about having seen the little hole pattern, reminding me of the Recurve, on which I don't like how restricted the intake is. Profile is somehow FAR more air - probably because INSIDE those holes, there's no restriction at all.
So - the Profile has a lot going for it:
Only downside: you just can't hit it with 4 volts.
- Easy to mount those precut mesh coils.
- You CAN see the squonk, seeping through to the coil, despite being wicked with literally 5 times the cotton I'd use in anything else.
- It's so far, surprisingly good flavor, nice dense vapor...
- Plenty of air for me (running it wide open), and easy to adjust down.
Pico for sizing...
View attachment 127089
Last edited:
No MCM SSSP for me this Christmas. Received a very well used one. At least I was sent a new bottle for it... Going back!
Edit: What do you think? I was told it's new.
View attachment 127069
I see it's normal after talking with customer service, and they even offered me to keep the ulton one, instead of the black I ordered, even though it costs more.
I'd disassemble it and clean up those metal parts. What's up with that? Moisture during storage and shipping?
Then reassemble and see how it hits, check Vdrop. That a mosfet or mech?
Wow, good deal so long as you use a batt with high amp limit
Sent from the Death Star
Merry Christmas to all of you Bonkers!
Sent from my LG-D850 using Tapatalk
Sent from my LG-D850 using Tapatalk
Although I can get the humor of that, I hate drunk drivers; there is a special place in hell for those people.
And I must say this is not a stab at you in anyway, as I mentioned I can get the humor of it, truly.
Sent from my iPhone using Tapatalk
And I must say this is not a stab at you in anyway, as I mentioned I can get the humor of it, truly.
Sent from my iPhone using Tapatalk
Going to need a squonker for this little fella as it's an awesome RDTA. The Squeeze 2 maybe?
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
LOL, my 80 yearl old m-in-law was jonesing, so I went digging through some boxes. Just set her up with a Spinner and an Evod...even found some 18 mg liquid. She seems to like it (she said she's used Juul, but still smokes).
She's here all week...I figure maybe Wednesday we go Provari with a Protank, and then by next weekend, send her home with a Pico Squeeze?
(not a squonker, lol)
She seems to like it (she said she's used Juul, but still smokes).She's here all week...I figure maybe Wednesday we go Provari with a Protank, and then by next weekend, send her home with a Pico Squeeze?
(not a squonker, lol)
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
LOL, my 80 yearl old m-in-law was jonesing, so I went digging through some boxes. Just set her up with a Spinner and an Evod...even found some 18 mg liquid.
She's here all week...I figure maybe Wednesday we go Provari with a Protank, and then by next weekend, send her home with a Pico Squeeze?
View attachment 127463
(not a squonker, lol)
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Yep.And Merry Christmas- guess it's already so in the land down under
Prepping lunch.
No roo steaks? My uncle lives in Melbourne and you'd think that's all he eats haha! Sears them in chili oil he tells me.Yep.
Prepping lunch.
Sent from the Death Star
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
TIT AFC - must be Rip's latest attie that sucks
gopher_byrd
Cranky Old Fart
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Merry Christmas Bonkers!
Merry Christmas
Sent from my SM-G955U using Tapatalk
Sent from my SM-G955U using Tapatalk
Way to go JL, you only live once, it ain't a dressed rehearsal!
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
gopher_byrd
Cranky Old Fart
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Hmmm, nope I wouldn't fry bacon naked either. Then again for frying bacon I would get out the ratty flannel jammies instead of the nice new silk ones...I would not fry bacon naked - I am parading around in new silk pajamas
I can sympathize! Fortunately I found a couple of braggot I made in 1995, it is a "light" 24% ABV. Life is much better after half of bottle!
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Ok maybe this will break JLs non spending on Vape gear
Odis has a 55% off sale using code Boxing55
Odis 16 $54 shipped regularly $114
Sent from my iPhone using Tapatalk
That is a deal - hmm. Already have three of those though, that is a deal, but already have 3, hmmm
Where are they based? Boxing Day is a UK and Australia holiday. No one knows why it is a holiday. Some think it was regifting xmas gifts, others think it was a day that usually had a big fight onOk maybe this will break JLs non spending on Vape gear
Odis has a 55% off sale using code Boxing55
Odis 16 $54 shipped regularly $114
Sent from my iPhone using Tapatalk
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Odis is Canadian
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Just check the shipping rates to the US, you'll know they're not a US company
No shit - I wish they had a regular Canadian Post option - it's almost as slow as China, but doesn't add 20% to the cost of shipping