What is the right coil for my vapor Ego AIO

[james5137]

Hi, I have EGo AIO and I'm confused what the right coil for my vapor!
There is a number on my coil said "SS316" I checked their website and I found that my vapor used SS316-0.6ohm head
From what I know I need a wire with 0.6ohm resistance.
The seller gave me a wire for free 28ga-321mm.
The original coil has 8 wraps, and the resistance around 0.7ohm I built a coil with the same wraps and after I measure the resistance I found it around 4ohm.
Did the seller sent me the wrong coil for my vapor?!
If yes! what is the right "ga" for my device!
I checked a vapor calculator and it says that I need 2.5 wraps to have 0.7ohms
Can I use my vapor with only 2.5 wraps?!

 

[gbalkam]

Does the Ego AIO have a rebuildable atomizer?

 

[james5137]

Yeah, it's a little bit hard, but not impossible! I rebuild the coil once and it works,
I have problems with the right wire "ga"

 

[gbalkam]

http://www.steam-engine.org/coil.html?mat=ss316&r=0.7&awg=28&id=2.5

28ga Stainless steel wire. 7 wraps.. 0.70 ohm.
Keep in mind, if you use a smaller core you will need more wraps. Not sure what inner diam you use to rebuild those coils.