Thx, I'm literally waiting on the last 3 pieces before box begins build. Adapt plastics building my acrylics, which is the 510 connector base that'll be illuminated by my green diode. It will sit flush, it's 1 inch wide circle with 2mm depth. Just like no name mods. Before they switched owners, he never made it work with any other 510, except the fd, plus never did it with a dna chip. I have an avionics guy who think he can not only make it work with my avid cisco 510, but also with the dna 250. And the other acrylic piece, is a see thru glass for my dna screen. most have the screen sunk into there enclosure, so you see that it's not flush. so I got a brimstone 3d dna mount board slash screen holder, and I'll mount that to the acrylic, which the acrylic will sit flush with the enclosure. so when I'm done it'll look like my dna screen is exactly flush with my enclosure, and will have clear visibility. not like the enclosures that have the whole dna on the outside, that have a bulge on the outside of the box, that's the holder. and not like the enclosures that you can actually touch the dna screen. also it'll help for protecting the screen from the outside elements. the acrylics are paid for in full, but I'm looking at first week of January before receiving it, due to the turnaround they have and being booked up. so that's a bummer. the third, and final piece, and the most important, has yet to be found, made, or built. the enclosure. since i don't have a business tax id Hammond can't sell the box directly to me. another bummer. so I'm going through a distributor. I've started looking for one before i started. A truly custom enclosure was around 1500 to 15000. Yeah really. due to getting a company to do the cad drawing you need. the setup for a custom enclosure, the setup for the silk screen printing the painting, the minimum quantity, it's been a nightmare. so i went away from a complete custom enclosure to a modified one, less of a headache, but still q nightmare. Looking for an enclosure that's at least 7x3x3 inches inside diameter, plus a case thickness that can be milled at least 1mm to at least make my 510 connector that's 2mm thick some what flush, not to mention at least a 1/8 of an inch so my acrylic disc that will illuminate the 510 base some what flush, the choices are few and far to come by. plus my 510 needs to be able to case grounded, so that limits the type of enclosure material i can use. also the price goes up because my logos that i want on the enclosure door and on the opposite side of the enclosure door. plus the milling for my 510 connector, my diode cutout, my acrylic disc cutout, the usb cutout, cutouts for my dna screen, 3 each momentary switch cutouts, and the holes for screws for my 510 and usb panel I'm using to relocate the dna usb port to the lower part of my enclosure. it's been rough, but will pay out eventually. the inside I'll keep bare, the outside will be smooth silky black, and the logos in color. I was wondering if anybody on this forum builds any enclosures, i need all the help i can get. that, which is the enclosure, is the only part i need that's not paid for, and the enclosure is the only part i have yet to find a seller. which is putting The Reactor Forty Six on hold. hopefully allied electronics send get me something asap. i all ready got my alliance fatboy 46mm rda all coiled up with triple parallel fused Clapton wire, and native wicks cotton installed, made me a batch of my custom 3 percent nicotine, all vg bubblegum e juice i made, have all my wires, switches, Flux, solder, and chemicals, just need that darn enclosure. I can work around the acrylics, i have some discs, and bypass the screen acrylics, and be vaping in no time with my mod, if, if, i had my enclosure, we'll see, I'll keep you guys posted.