Hey man what kind of build and battery life are you getting with that set up. I'm using a minivolt with a Pico but I'm not liking the tank, I was thinking of picking up a moon shot though.
Hey pancho! I was aim8ng for a .7-.8 build but im not that good/experienced with building coils so I ended up with a .38
Hey there! I tried running my moonshot on the MV but it sucked my battery life dry in 2-3 hrs tops. Do you chain vape?mini volt/velocity mini .95 28g dual. Lasts..... A long time.
Sent from my iPhone using Tapatalk
What resistance are you running on the moonshot?
I have one with a Pico build with 26g, 8 wraps, at 2.5mm ohming out to 1.17 ohms. I keep it around 20 watts.
Nice setup! Been thinking of getting something like that but I dont think Im ready for a mech mod just yet. Looks sweet though!
It kept jumping from .38 and .42. That rdta is a real b*tch to build on. If I'm lucky, I wont get "Atomizer Short" or "Ohms Too Low". I stopped running it on my Mini Volt already. Paired my MV to the tank it came with.
Cant seem to view these pics. Been wanting to see the Tesla Nano next to the Mini Volt as I've also been eyeing that mod.almost forgot the Tesla Nano 60w TC.. even though it's a little deeper.. it feels really good in the hand with the top fire. Hold it like you'd hold a gun or fire with your thumb. Here it is next to the mini-volt and the nugget for reference.
Looks great! Can I ask though how you built at 2.5ohms? Been wanting to run the moonshot on mine without draining the batt too fast. 10w sounds like it'd last the whole day!
I just went and checked, it's actually 2.65Ω! I know it's a single coil, but can't remember exactly what I built, but it's probably 30ga Ka1, 9 or 10 wraps on
I got the moonshot mainly to pair with the Mini Volt even though I got it as a kit.
Nope. Maybe I should try using a web browser. I think something's wrong with tapatalk... Thank you though!
Just finished building this a while ago. I believe this is 10 wraps at 2.5mm. Using 24g kanthal. Ohms seem to keep jumping though which is kinda weird. Not sure if it's with the wire im using or with the atty.
Check the bottom pin on your 510, that situation sounds like it's not connecting right. Resistance jumping up like htat is generally a sign of a connection issue. So try firing and tightening the screws on the deck, and check the 510. If neither of those try pulling the whole tank apart and putting it back together. Basically something not touching that should be.Just finished building this a while ago. I believe this is 10 wraps at 2.5mm. Using 24g kanthal. Ohms seem to keep jumping though which is kinda weird. Not sure if it's with the wire im using or with the atty.
View attachment 44607
EDIT: It's now at .79ohms after wicking and filling with juice. Now I know this is not on my Mini Volt but I really dont want to mess up that mod since I like it so much
Thanks for the tip! I've checked all the screws and the 510 as well. All are tightly screwed in place.
The 510 might need to be loosened is what I'm getting at. My Avocado is that way, I need a full turn out for it to make connection on most of my mods, screwed in tight and it's just too short and not getting full connection. So with that I have builds that are <.2Ω reading all the way up to >.4Ω. Once I realized the issue and got the connection pulled out a bit it's been a golden little thing ever since.Thanks for the tip! I've checked all the screws and the 510 as well. All are tightly screwed in place.
I'm suspecting the coils are touching the slope of the chimney since the ohms start to jump upon assembly of the chinmey and then jump again after filling with juice. The tank does heat up quite rapidly too so Im really suspecting the coils are touching the chimney area.
If the Moonshot wasnt such an effort to build, I'd change my coils right away. Plus I just finished 1/4 of a new bottle of juice due to leaking problems through the air flow. It's probably hardest rdta Ive built on to date. Really frustrating
I saw a video on it being disassembled over in youtube. The battery actually said 1200mah. Checked on cov's site and they spec it as 1200mah. Not sure why retailers spec them at 1300mah.
I think you actually might be right. I have the 510 torqued down into the atty. Will try to loosen it up later.
fwiw,, every time i rebuild my rta,, i run neat juice until i am satisfied everything is good. i vape the neat then refill with the desired juice.Thanks for the tip! I've checked all the screws and the 510 as well. All are tightly screwed in place.
I'm suspecting the coils are touching the slope of the chimney since the ohms start to jump upon assembly of the chinmey and then jump again after filling with juice. The tank does heat up quite rapidly too so Im really suspecting the coils are touching the chimney area.
If the Moonshot wasnt such an effort to build, I'd change my coils right away. Plus I just finished 1/4 of a new bottle of juice due to leaking problems through the air flow. It's probably hardest rdta Ive built on to date. Really frustrating
Finally got to see them pics. I gotta say, Im really loving the size of the tesla nano. His is dual 18650 right?almost forgot the Tesla Nano 60w TC.. even though it's a little deeper.. it feels really good in the hand with the top fire. Hold it like you'd hold a gun or fire with your thumb. Here it is next to the mini-volt and the nugget for reference.
If you are referring to the tesla nano, I believe it is a built in dual lipo battery. Claimed "3600mah".
Is that a subohm tank or a rta?New setup for my out-and-about:
Loving this tank! The air flow and juice flow controls are ingenious!
It's an rta, a real neat one too! Just got it yesterday. Juice and air flow controls are awesome, totally zero leaks and flavor is even better than my Moonshot/Griffin. Highly recommend it
I just chanced upon it at my local vape store but I'm sure some online shops have it.
