Good MOD for TFV4 Mini?

[greasegizzard]

I would try the .5 first when you get them. If you decide you want a warmer vape, you can always throw in the .2 but it would be a little rowdy if it's your first time I think. But everyone is different. You'll find your sweet spot eventually. Everytime I think I've found mine, I decide to keep playing around. lol

 

[Skullzz]

I am a woman, I don't know what I want lolol. I want the nic but I want that cloud as well

 

[Mjjmfa]

My ni200 coils give me outstanding clouds and flavor, but like gizzard the lizard said, you'll find your sweet spot

Sent from my VS990 using Tapatalk

 

[f1r3b1rd]

I would try the .5 first when you get them. If you decide you want a warmer vape, you can always throw in the .2 but it would be a little rowdy if it's your first time I think. But everyone is different. You'll find your sweet spot eventually. Everytime I think I've found mine, I decide to keep playing around. lol

that's why I use the silo beast with the triton coil - ss tc at 45w for an adv. or the .3 ss tc at 55 or I can grab one of third party Clapton's.

 

[RatRacer]

.5 is a good jumping off point. I ran that on a POS Istick 50W previously, so you'll know if you need more than the mini has to offer.

 

[Skullzz]

that's why I use the silo beast with the triton coil - ss tc at 45w for an adv. or the .3 ss tc at 55 or I can grab one of third party Clapton's.

Wish I could understand what you just said lolol


Sent from my iPhone using Tapatalk

 

[Mjjmfa]

Silo and the triton are tanks, I have that tank but I haven't tried it yet because the coils I have are low wattage.

Sent from my VS990 using Tapatalk

 

[Skullzz]

Silo and the triton are tanks, I have that tank but I haven't tried it yet because the coils I have are low wattage.

Sent from my VS990 using Tapatalk

Ah ok.


Sent from my iPhone using Tapatalk

 

[Mjjmfa]

I hear it's one of the best though, most likely for my evic vtc mini

Sent from my VS990 using Tapatalk

 

[Skullzz]

I hear it's one of the best though, most likely for my evic vtc mini

Sent from my VS990 using Tapatalk

That's what I have now...evic vtc mini. But wanted a bit more wattage to play with so got the rx200


Sent from my iPhone using Tapatalk

 

[RatRacer]

I am a woman, I don't know what I want lolol. I want the nic but I want that cloud as well

Oh, and where ever you land, don't cheap out on the batteries. The lower the ohms you go, the more amps you draw.

 

[Mjjmfa]

You're going to love it! The evic is my starting mod, so you're going to love the upgrade. The rx200 really isn't as big as it looks in pictures, but still amazing

Sent from my VS990 using Tapatalk

 

[f1r3b1rd]

Wish I could understand what you just said lolol


Sent from my iPhone using Tapatalk

lol, I run a tank called the silo beast from beyond vape, it holds 5ml, has top topfill and it takes atlantis and triton coils. I use the 0.4 ohm Triton coils in it, - they are stainless steel, so I can run them in either TC or power mode. Whats nice is that they only neeed 40-45w. So I can get really good battery life out of them. They also have a 0.3 ohm coil that takes 50-60w. Or there is a third party Clapton for it from Atom VAPES. There is also a 0.2 atlantis that needs about 80w

I normally build, but its nice to have a good reliable easy to find coil for traveling. a triton or atlantis coil can be found anywhere.- literally.

 

[greasegizzard]

Wish I could understand what you just said lolol


Sent from my iPhone using Tapatalk

Stainless steel temperature control at 45 watts for an all day vape

Sent from the future with my Flux Capacitor enabled Note 5

 

[greasegizzard]

You're going to love it! The evic is my starting mod, so you're going to love the upgrade. The rx200 really isn't as big as it looks in pictures, but still amazing

Sent from my VS990 using Tapatalk

I just got one. I didn't think I'd like it, but I do. It fits in the hand nice. I still use my Noisy Cricket mostly, though.

Sent from the future with my Flux Capacitor enabled Note 5

 

[greasegizzard]

lol, I run a tank called the silo beast from beyond vape, it holds 5ml, has top topfill and it takes atlantis and triton coils. I use the 0.4 ohm Triton coils in it, - they are stainless steel, so I can run them in either TC or power mode. Whats nice is that they only neeed 40-45w. So I can get really good battery life out of them. They also have a 0.3 ohm coil that takes 50-60w. Or there is a third party Clapton for it from Atom VAPES. There is also a 0.2 atlantis that needs about 80w

I normally build, but its nice to have a good reliable easy to find coil for traveling. a triton or atlantis coil can be found anywhere.- literally.

Rayon has ruined me from being able to use pre made coils.

Sent from the future with my Flux Capacitor enabled Note 5

 

[f1r3b1rd]

Rayon has ruined me from being able to use pre made coils.

Sent from the future with my Flux Capacitor enabled Note 5

lmao, I still use that somewhat; mostly I use KGD Cotton, though.

I'm also usually on an RDA in the 50-70w range though. For whatever reason, once I get above 40w rayon starts tasting like Tupperware to me. I do love it in my MTL tanks though. Especially the erlkenigin.

I'm weird like that though, ni80 tastes like a tin can to me, TI tasted like a bad harry potter jelly bean, .. i have a strange pallet.

 

[greasegizzard]

lmao, I still use that somewhat; mostly I use KGD Cotton, though.

I'm also usually on an RDA in the 50-70w range though. For whatever reason, once I get above 40w rayon starts tasting like Tupperware to me. I do love it in my MTL tanks though. Especially the erlkenigin.

I'm that way with cotton now. Although, to be fair, I haven't tried good cotton in my RBAs or RDAs. I went straight to rayon when I started building.

Sent from the future with my Flux Capacitor enabled Note 5

 

[f1r3b1rd]

I'm that way with cotton now. Although, to be fair, I haven't tried good cotton in my RBAs or RDAs. I went straight to rayon when I started building.

Sent from the future with my Flux Capacitor enabled Note 5

I'm kind of old school. not as old as some. But, I still remember boiling my ex wife's cotton balls. That felt good to do, also. lol

When rayon started being used, went and I went bought the big huge lifetime supply box and mailed pieces around for people to try, then came the fancy smancy cotton.

 

[Mjjmfa]

Sent from my VS990 using Tapatalk

 

[greasegizzard]

Sent from my VS990 using Tapatalk

Is that a regular stainless TFV4? The finish looks more like a dark chrome.

 

[Skullzz]

Looks just like mine only white ring on it


Sent from my iPhone using Tapatalk

 

[greasegizzard]

Maybe it's just the light or something, but his looks polished and really shiny. Mine is almost a satin finish.

 

[Mjjmfa]

My babies before I got the arctic

Sent from my VS990 using Tapatalk

 

[Mjjmfa]

Woops wrong picture

Sent from my VS990 using Tapatalk

 

[Mjjmfa]

these are my babies before the arctic

Sent from my VS990 using Tapatalk

 

[Skullzz]

I am looking forward to getting my Arctic in the mail

I hope it comes when the RX200 comes....that is gonna take a while said 6-25 days from Bestgear lol

 

[Skullzz]

so, for the arctic tank, I can put ni200 coils in it? I seem to really like those.....

 

[Mjjmfa]

Yes I love ni200 coils

Sent from my VS990 using Tapatalk

 

[pescadore]

My son uses the TFV4 Mini on his Koopor Plus and really likes it. I use the Griffin on my Reuleaux DNA 200 and it is really good for flavor and vapor. If you don't get any kind of error message on the RX200 when you try the TFV4 Mini then I wouldn't worry about it.

 

[Mjjmfa]

Is that a regular stainless TFV4? The finish looks more like a dark chrome.

Yes, I said before I have the gun metal/ chrome edition

Sent from my VS990 using Tapatalk

 

[greasegizzard]

Yes, I said before I have the gun metal/ chrome edition

Sent from my VS990 using Tapatalk

Oh, ok. I missed that. I like it, looks nice. I didn't know they made one like that.

 

[Mjjmfa]

That's alright and Neither did I, lol. Thank you

Sent from my VS990 using Tapatalk

 

[Mjjmfa]

I've been using the arctic all day, and I know you guys have experience with it, but my clouds aren't as big as yesterday. What do I do to make them bigger? I've been using the ni200 coils. Is there anyway I can make them bigger?

 

[Mjjmfa]

Is that a regular stainless TFV4? The finish looks more like a dark chrome.

Oh, I just reread your post, that's not the tfv4, that's the arctic! I'm sorry