That's my go to build on it too.I do dual 26g 8 wraps 2.5mm great flavour and can chuck a cloud if wanted.
Sent from my P022 using Tapatalk
I forgot that part. Mine's 2.42.5mm ID.
You can definately fit 24 gauge in the goblin mini and not get too hotCant really do much more then a 6 Wrap 26G 2.5mm build in the GM....Ive done claptons but there isnt enough space and it gets too hot for the lil bugger. Stick to gauges higher then 24g and stay under 2.5mm ID.
Maybe a Twisted 3 x 30g build would do nicely?
I said the claptons I had made it too hot and advised to use gauges 24g and higher. I wasnt trying to say 24g was too hot to use.You can definately fit 24 gauge in the goblin mini and not get too hot
O ok sorry I misunderstood what you were saying.I said the claptons I had made it too hot and advised to use gauges 24g and higher. I wasnt trying to say 24g was too hot to use.
I did try Ti but it was a much cooler vape. When I first tried TC it was long ago..... I had the Evic VT and purchased the TC and the flavor was muted. After that, I've never used TC again.I'm a complete convert to temp control, and Ti is all I'll use anymore.
My coils last until I decide to change them, although like anything else they'll gunk up a bit. I still dry burn them, but do so in tc mode with the temperature turned up. Not quite as quick and easy to clean as firing kanthal till it's glowing white and rinsing, but honestly not that much more difficult and the taste on a properly setup Ti coil in tc mode is miles ahead of kanthal imho.
Fwiw, the reason people don't like dry burning Ti is because if you overdo it, it can form a white powder layer of Titanium dioxide. Ti02 is generally regarded as safe to consume, but you probably don't want to be inhaling it. On the bright side, a quick rinse under water, maybe a little brushing, and it washes completely away. The supposed risk is completely overblown imo.
Whatever works for you and keep you happily vaping though!
I would of definitely tried your build, it looks very promising however I'm out of 28G kanthal. Only have 26g&32gMy fave build for the G-Mini
2 piece twisted 26ga SS316L with 28ga Kanthal A1... 6 wraps @ 2.5 mm diameter.
This yields a dual coil setup of .18 ohms and works with both (SS algorithm) temp control and wattage mode.
This build is just mouth watering at about 340 - 380 degrees.
I also tried it using only Twisted SS but it's a little hot. One of the properties of SS is that it holds heat. Twisted SS IMO, doesn't cool down fast enough. It keeps vaping for a couple secs after you're done. The Kanthal is needed to increase the resistance and let the coils cool faster.
It's delishimus...
PS There are no clouds bro from the lil Gobbler. It ain't that kinda party. Strictly a flavor machine.