Need RDA Which Can Work With Dripbox Any Suggestion?

[Asif Majeed]

HI
I Need a RDA with can work with kangertech drip box the one which comes with it sucks. also if someone using dripbox with its rda please share how you build it

Admin please move my post if it is not relevant to this group

 

[AmandaD]

Moving this to bottom feeders ;-)

The Tobeco velocity mini should work with the dripbox. I use one on a Reo, and it works well.

 

[Asif Majeed]

Moving this to bottom feeders ;-)

The Tobeco velocity mini should work with the dripbox. I use one on a Reo, and it works well.

Can you send link for both? Plz try to find on fasttech

 

[AmandaD]

Both? I only gave you one RDA here it is on FT https://www.fasttech.com/products/0/10014538/3141900-velocity-mini-styled-rda-rebuildable-dripping

 

[Asif Majeed]

U said reo


Sent from my iPhone using Tapatalk

 

[AmandaD]

U said reo


Sent from my iPhone using Tapatalk

A Reo Grand is made by Reos Mods https://www.reosmods.com/

 

[Asif Majeed]

can you post your dripbox and velocity picture here?

 

[AmandaD]

can you post your dripbox and velocity picture here?

I don't have a dripbox - I have a Reo.

 

[Asif Majeed]

What ever u have i want to see it


Sent from my iPhone using Tapatalk

 

[Rabbit Slayer]

https://www.eciggity.com/velocity-mini-rda-clone-by-tobeco/ ...if you want it sooner than 3 weeks
+1 on the V mini

 

[DogMan]

Drip box has a picky 510. Too short it won't connect. Too long, you'll collapse the innards of the 510.

Good luck

Sent from my LG-H815 using Tapatalk

 

[Asif Majeed]

https://www.eciggity.com/velocity-mini-rda-clone-by-tobeco/ ...if you want it sooner than 3 weeks
+1 on the V mini

Fasttech is delivering in 2 weeks but thanks for the link

 

[Asif Majeed]

Drip box has a picky 510. Too short it won't connect. Too long, you'll collapse the innards of the 510.

Good luck

Sent from my LG-H815 using Tapatalk

Didnt got ur point should i stick with RDA which come with it?

 

[Train]

I haven't had a problem with the dripbox 510. I don't doubt that it's possible it could get funkified - it's a chinabox...v1.
But mine's running great.
I've thrown 4 different RDA's on it - and never even built the one it came with.

That Velocity is probably the cheapest. I had a problem with mine - when I swapped in the BF pin, the post got all wobbly.

I've used a Sapor BF (pretty good) a BF Solstice (undecided) and a BF Narda clone (outstanding). Also, right now, an M-Atty clone (Catfish BF).
These were all like $40-$50 tho.
For the Narda or M-Atty - they're both out of stock, but considering another run - let 'em know if you want one.

 

[Asif Majeed]

I haven't had a problem with the dripbox 510. I don't doubt that it's possible it could get funkified - it's a chinabox...v1.
But mine's running great.
I've thrown 4 different RDA's on it - and never even built the one it came with.

That Velocity is probably the cheapest. I had a problem with mine - when I swapped in the BF pin, the post got all wobbly.

I've used a Sapor BF (pretty good) a BF Solstice (undecided) and a BF Narda clone (outstanding). Also, right now, an M-Atty clone (Catfish BF).
These were all like $40-$50 tho.
For the Narda or M-Atty - they're both out of stock, but considering another run - let 'em know if you want one.

Try to find then on fasttech.com
And if u find one of those u have send me the link

 

[MyMagicMist]

Moving this to bottom feeders ;-)

The Tobeco velocity mini should work with the dripbox. I use one on a Reo, and it works well.

Wow! My apologies if this seems a bit corny or such. I just noticed you're a moderator. *chuckles*
No disrespect intended. In fact quite the opposite. I did not know you were a moderator, yet here you are moderating and doing so politely, respectfully and nearly unnoticed. Thank you for being an excellent moderator. It's wonderful having moderators like you.

 

[cinnful]

I just got a Hobo v3 clone from Angelcigs - this is from the US warehouse, if you are anywhere near SF, CA it should arrive within 2-3 days - they reliably deliver to me within that time frame. And @ $4.99 you really can't go wrong!

http://www.angelcigs.com/hobo-v3-st...da-tiffany-blue-extra-bottom-feeding-pin.html

And I watched this to do a build on it:

 

[Asif Majeed]

I just got a Hobo v3 clone from Angelcigs - this is from the US warehouse, if you are anywhere near SF, CA it should arrive within 2-3 days - they reliably deliver to me within that time frame. And @ $4.99 you really can't go wrong!

http://www.angelcigs.com/hobo-v3-st...da-tiffany-blue-extra-bottom-feeding-pin.html

And I watched this to do a build on it:

I sold my drip box didnt like it at all don't recommend to people who have big mods

 

[RonJS]

The Tobeco velocity mini should work with the dripbox. I use one on a Reo, and it works well.

Did you drill a hole through the center post for BF with the REO?

Thanks!

Ron
---
“If you can dream it, you can do it.” – Walt Disney

 

[2pak2zero]

Did you drill a hole through the center post for BF with the REO?

Thanks!

Ron
---
“If you can dream it, you can do it.” – Walt Disney

The velocity mini comes with an extra BF pin.
At least the one I got from eciggity did.

 

[RonJS]

The velocity mini comes with an extra BF pin.
At least the one I got from eciggity did.

Thanks!

I was looking at the Fastech one Amanda linked to and only saw...

PACKAGE CONTENTS 1*RDA Atomizer, 1*510 Drip Tip Adapter, 1*Allen Key, 2*Coils, 4*Screws, 3*O-rings

At that Fastech price, I think, if necessary, I could come up with a drill & bit.
Certainly would be easier not to though....

Edit: looking over at your suggestion, I did see...
1x Velocity RDA Bottom Feed 510 Pin
...listed at the one from eciggity

Ron
---
"There is nothing worse than a sharp image of a fuzzy concept."- Ansel Adams

 

[lordmage]

i read these work so picked up two for my silver dripbox when i get it that is
https://www.angelcigs.com/catalogsearch/result/?cat=&q=zorro

 

[nightshard]

Tsunami RDA:
http://www.heavengifts.com/Geekvape-Tsunami-RDA-Atomizer.html

Hollow pin:
http://www.heavengifts.com/GeekVape-Tsunami-RDA-Hollow-Positive-Pin.html

The Tsunami24 already comes with a hollow pin but it's too wide for the dripbox.

 

[Doc Roland]

So I read cinnfuls post and I did exactly what she did about 5 days ago and today I'm sitting here with my hobo v3 rocking it. Thanks cinnful!

 

[cinnful]

You are very welcome, Doc Roland!

 

[Doc Roland]

Btw, the new kanger 160 is probably the best mod I've ever used. So in love. Battery life is a bit garbage thoufh but it's great otherwise. The drip box has nothing on it.

 

[Faust]

Waiting to get the 160w, but currently have the original dripbox. Switched out the stock RDA for a Tobecco mini Velocity and it's way better now. It came with the bottom feeder pin already. The Tobecco version of the mini is the only one I've seen listed that comes with the feeder pin.

 

[Train]

Found another "squonk-ready" clone I can definitely recommend!
Pancake - vaping VERY nicely...$21

 

[cinnful]

Waiting to get the 160w, but currently have the original dripbox. Switched out the stock RDA for a Tobecco mini Velocity and it's way better now. It came with the bottom feeder pin already. The Tobecco version of the mini is the only one I've seen listed that comes with the feeder pin.

The Hobo v3 comes with a bottom feeder pin as well.

Where did you buy your Tobeco Mini Velocity? I would really like to pick one up that I know will have the bottom feeder pin included.

Edit - I did notice eciggity listed, but is that where you got yours?

 

[cinnful]

Found another "squonk-ready" clone I can definitely recommend!
Pancake - vaping VERY nicely...$21

I am really considering getting one of these - have you experienced much spit back from this RDA ?

 

[Train]

No, I haven't...
And I thought I might squonk out the airslots, as it's pretty low profile - but that hasn't happened either.
I'm thinking bout getting another - even though I have too many RDA's.
Trying to figure out if Fasttech and 3F are the same or not - they LOOK it, except for the writing on the bottom. Wouldn't care, but I have other stuff sitting in a Fasttech cart...

I am really considering getting one of these - have you experienced much spit back from this RDA ?

 

[jcash74]

Found another "squonk-ready" clone I can definitely recommend!
Pancake - vaping VERY nicely...$21

Have you used the ultem cap as well? I just ordered 1 of these for my brass coppervape.
Sorry for the thread jack but I had to get 1 of these!

stand up and fight for your right to vape!

 

[LarryPer123]

Moving this to bottom feeders ;-)

The Tobeco velocity mini should work with the dripbox. I use one on a Reo, and it works well.

Hi
I have a Reo standard not LP
Is yours a LP?
Do you think it will work on mine?

 

[Train]

The Ultem cap has the same side airflow slots, AND this weird top airflow - you turn the tip to uncover more slots.
If you want HUGE airflow, it'd probably be good - but it's a bit much for me!
So I haven't really used it - I've got the metal cap on, and even then I run the AFC about 80% open...

Have you used the ultem cap as well? I just ordered 1 of these for my brass coppervape.
Sorry for the thread jack but I had to get 1 of these!

stand up and fight for your right to vape!

 

[jcash74]

The Ultem cap has the same side airflow slots, AND this weird top airflow - you turn the tip to uncover more slots.
If you want HUGE airflow, it'd probably be good - but it's a bit much for me!
So I haven't really used it - I've got the metal cap on, and even then I run the AFC about 80% open...

That's a bummer I was planning on using the cap on it as well. Oh well looks like a great rda wither way.
Thanks for the link, I watched a couple reviews and bought it. Hopefully epacket doesn't take a month but I have a velocity v2 bf for now to use.

stand up and fight for your right to vape!

 

[jcash74]

Does anyone have a lowpro bf rda? I have 1 on the way and can't wait to try it out. I was just curious as to what others experience with this was and if anyone has the cap accessory top. I can't find one of these caps anywhere. I have been in contact with vapor dna and they sent me a link to the manufacturer, whom I've emailed also.
https://www.e-cigarette-forum.com/forum/index.php?threads/755491/
This link is to my thread inquiring about the cap.

stand up and fight for your right to vape!

 

[KentA]

Hi
I have a Reo standard not LP
Is yours a LP?
Do you think it will work on mine?

I do believe the Tobeco Velocity Mini is 22mm, so no, it would not fit a non-LP Reo unless you give the Reo a "haircut".
The "standard" Reo was designed back in the days when cartomizers were popular, & they need a 14mm or smaller atty like the RM2, Cyclone, Chalice, Hellfire Viper....

 

[PreparationHero]

Tsunami RDA:
http://www.heavengifts.com/Geekvape-Tsunami-RDA-Atomizer.html

Hollow pin:
http://www.heavengifts.com/GeekVape-Tsunami-RDA-Hollow-Positive-Pin.html

The Tsunami24 already comes with a hollow pin but it's too wide for the dripbox.

I put the tsunami 24 bf pin on my 160 and it just sucks the juice as I inhale. It's pretty nice actually, I won't worry about the bottles as much.

 

[MyMagicMist]

The velocity mini comes with an extra BF pin.
At least the one I got from eciggity did.

Even the clones of the Velocity V2, and one of them a standard Velocity, the Velocity minis on FastTech come with bf pins. As a reminder & note, you need to unscrew a tiny grub screw out of the bottom end of the positive pin. Don't pull my mistake and squonk away and not figure out why you're not getting juice. *chuckles*

 

[MyMagicMist]

Found another "squonk-ready" clone I can definitely recommend!
Pancake - vaping VERY nicely...$21

Hey, @Train Kind of got my interest with these low profile decks. Can a person build & use say 28awg Kanthal vertical coils in these, or is the top cap too close down on it to risk shorting? *sits imaging three vertical coils acting like three mile island and vaping off of it* If not that's alright, too. I might still want to consider one of these low profile decks. Hear tale that a reduced chamber seems keen to hammer more flavor, not doubting that either as I can see how it would. Sure the Velocity is great & all but well, person needs to have options.

 

[MyMagicMist]

I do believe the Tobeco Velocity Mini is 22mm, so no, it would not fit a non-LP Reo unless you give the Reo a "haircut".
The "standard" Reo was designed back in the days when cartomizers were popular, & they need a 14mm or smaller atty like the RM2, Cyclone, Chalice, Hellfire Viper....

You can use an adapter well with a Reo Grand or Reo Grand style and use 22mm or larger diameter decks.

http://ecblendflavors.com/adapter-smoktech-ego-to-510/

There's one which ought to work effectively. I got one with a Smok X-Pro M22 kit. It was a pleasant surprise for me that it worked. It is currently on my Reo Grand clone that I did not file down to make into a Reo Low Profile mod. I'm topping it off with a Velocity V2 deck. Granted it's extra parts to get there, still gets there.

Watch though, some adapters are closed pins. You'll easily see which is which. All in, adapters don't cost too much & might be useful otherwise.

 

[Train]

There's someone I bump into on forums, who's a huge Pancake fan - he's got multiple authentics, and builds verticals in there...
(@inswva, it's you, right?)

Hey, @Train Kind of got my interest with these low profile decks. Can a person build & use say 28awg Kanthal vertical coils in these, or is the top cap too close down on it to risk shorting? *sits imaging three vertical coils acting like three mile island and vaping off of it* If not that's alright, too. I might still want to consider one of these low profile decks. Hear tale that a reduced chamber seems keen to hammer more flavor, not doubting that either as I can see how it would. Sure the Velocity is great & all but well, person needs to have options.

 

[inswva]

There's someone I bump into on forums, who's a huge Pancake fan - he's got multiple authentics, and builds verticals in there...
(@inswva, it's you, right?)

Yep, that's me. I run dual verticals in all three of my Pancakes. Works very, very well.

 

[jcash74]

Yep, that's me. I run dual verticals in all three of my Pancakes. Works very, very well.

I'll have to try this^^
I hope this saves my pancake. I haven't found a build I like in it yet. It doesn't help it's very tough to build on (for me).

stand up and fight for your right to vape!

 

[MyMagicMist]

Yep, that's me. I run dual verticals in all three of my Pancakes. Works very, very well.

Awesome! Shows me exactly what I wondered about. I could build some decent verticals. Also I see while a third might be possible, two will be the better call. Even that would rock.

 

[MyMagicMist]

There's someone I bump into on forums, who's a huge Pancake fan - he's got multiple authentics, and builds verticals in there...
(@inswva, it's you, right?)

Thank you.

 

[Timmerz]

Velocity V2 works great. Tsunami 24, Cthulu Hastur works but i had to find a longer pin because the one that came with it was way way too short. Should have asked though. original dripbox or 160?

 

[MyMagicMist]

I'll have to try this^^
I hope this saves my pancake. I haven't found a build I like in it yet. It doesn't help it's very tough to build on (for me).

stand up and fight for your right to vape!

Use a hand held non-powered mandrel. Wind your wire round it first. Then attach the legs, the portion left over from the coils on each end, to the screws. Use your mandrel put through the coil to help set your coil in place. Know this might sound simplified or "duh" obvious, not meaning it in a belittling way though.

 

[jcash74]

Use a hand held non-powered mandrel. Wind your wire round it first. Then attach the legs, the portion left over from the coils on each end, to the screws. Use your mandrel put through the coil to help set your coil in place. Know this might sound simplified or "duh" obvious, not meaning it in a belittling way though.

Not taken that way at all. Thanks, I appreciate the help. I've been spoiled with the velocity deck and have been having a tough time with the pancake.

stand up and fight for your right to vape!

 

[MyMagicMist]

Not taken that way at all. Thanks, I appreciate the help. I've been spoiled with the velocity deck and have been having a tough time with the pancake.

stand up and fight for your right to vape!

Might find out I'm spoiled by the velocity decks too. *chuckles* I was trying to find a video showing a basic tutorial on how to build verticals on the pancake deck, to no avail. I think the way I'm describing ought to work out alright though. Might be frustrating trying to get the legs to hook on the grub screws. Some trail and error will probably lead us to finding an easy method to it.

Only recently, genuinely learned more in depth about using rayon as wick. I had been doing a few things what made it sub par. Got it sorted out and now I get better vaping all around. Put two vertical coils on my velocity deck this morning. The single coil was doing fine, merely felt a desire to swap out.