Become a Patron!
Efusion duo 133
- Thread starter SteelDriver
- Start date
Thanks. Yes I also ended up there after a google search but they only have the yellow panels in stock. I'm looking for the green ones. Cant find them anywhere.
Definitely, yes, anyone?
You could also try messaging Lost Vape and see if they will sell them separately or point you in the direction of someone who does.Was offered to buy those side panels for £199..love them but quite a bit too expensive for me
Cheers,
Steve
Edit Here's their link:
http://www.lostvape.com/index.php
Yes, strange that wasn't the first thing I thought of.
Oh well, sent them an e-mail. I'll post their answer if they reply. Thanks.
Your welcome. Good luck, I hope you find what you're looking for.Yes, strange that wasn't the first thing I thought of.
Cheers,
Steve
As I'm here and have he experts here I'll take the opportunity to ask if it's true that I'll will blow a fuse on the board if I happen to put the 18650's in the wrong way? No reverse battery protection at all, is that true? If so, it sounds really scary..
I'm not sure whether Lost Vape is using a daughter board to provide reverse battery protection as Evolv suggests companies do when making a DNA200 mod that uses 18650's. I know Hcigar is using one in the VT133 (2 x 18650 DNA200). If you are using a 3s Lipo pack (the way the board was originally intended to be used), the daughter board is unnecessary because there is only one way to plug in the pack. Wismec/Joyetech chose to go in a cheaper route with the DNA200 Reuleaux. They used rings around the positive connection (mechanical protection) to prevent the fuse blowing if the batteries are inserted incorrectly. Unfortunately they tend to rip your battery covers when removing the batteries and for some batteries make the connection unstable.
Cheers,
Steve
Edit Since I've never seen mention of reverse battery protection, combined with the fact it can also be used with a 3s Lipo. My guess is they aren't using the daughter board. I don't have the mod so I can't open it up to look. That's just my guess.
Last edited:
Yes, I know about the wismec "protection" as I've one, never ripped my battery covers though. Well they probably don't have any protection at all then on the efusion, maybe I should stick to the lipo pack..even though a big reason for me getting it was the 133/18650 option.
Last edited:
Ok, thanks but so do I.I still have my
CARBON FIBERS
VAPE ON
I'm not saying you have to do that. Just make sure you insert the batteries observing the correct polarity. I have a DX200 that is sold with the 3s Lipo. At a later date they came out with a 2 x 18650 battery compartment. It doesn't have the daughter board or the mechanical protection. I use to use it in the 2 x 18650 configuration all the time without any issues. I'm just extra careful when inserting new batteries to observe proper polarity (It's marked on the sled) since I know I'll be replacing the fuse if I don't.
Cheers,
Steve
Yes, maybe I shouldn't worry. I've put in batteries in the wrong direction before on protected mods. Guess I just have to be more careful. But I think it's a really big flaw on a device like this that it doesn't have reverse battery protection. I don't blame evolve of course but lost vape. Thanks for all help
I just want to be clear - I don't know for a fact they (Lost Vape) aren't using a daughter board. Until I was sure one way or the other I would just be extra vigilant when inserting the 18650's. Like they say an ounce of prevention is worth a pound of cure (or a pack of spare fusesYes, maybe I shouldn't worry. I've put in batteries in the wrong direction before on protected mods. Guess I just have to be more careful. But I think it's a really big flaw on a device like this that it doesn't have reverse battery protection. I don't blame evolve of course but lost vape. Thanks for all help
)Cheers,
Steve
I will stick my neck out and say they do not have a daughter board. I still believe that's why the one member in this thread had that issue with it not turning on and the manual clearly states if you reverse the polarity it will not work.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I emailed lost vape about battery protection. Nothing yet 5/30/16
Last edited:
Would like to know about the Triade as well...
Hvymtl you get your 75 yet. If so how is it.
Yeah man. It's just ok. I shoulda known better getting something under a hundred watts for me, but it's ok. Looks awesome. Performs well. I've only used 18650's so battery life isn't much. It gets warm fast since I mostly chain vape on a rda. Built well.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I might get one next mod purchase but thinking I like the hotcig one.
So
Those yellow sheets that came with my duo are the fucking 3m tape needed for my carbon fiber panels to stick
All this time I was thinking how the fuck do I install those carbon fiber?!
Sure enough today while re building my stuff I accidentally scratch the yellow panel it came off very easy, I was like wtf is this stick thing... Shit, it was the 3m I was asking for..
carbon n paper wood on each side LOL
VAPE ON
Those yellow sheets that came with my duo are the fucking 3m tape needed for my carbon fiber panels to stick
All this time I was thinking how the fuck do I install those carbon fiber?!
Sure enough today while re building my stuff I accidentally scratch the yellow panel it came off very easy, I was like wtf is this stick thing... Shit, it was the 3m I was asking for..
carbon n paper wood on each side LOL
VAPE ON
found these wraps online for Efusion duo
http://zapwrapz.co.uk/products/efusionduo
http://zapwrapz.co.uk/products/efusionduo
I bought this wrap from here: https://www.vaporskinz.com/products/textured-dark-tamo-wood-efusion-duo-dna200
Really nice quality, a lot better then the original.
Really nice quality, a lot better then the original.
I'm just using what came with mine but will make some out of wood veneer down the road. If any of you know anyone that does woodworking as a hobbie they should be able to hook you up with a set for a couple bucks.
I plan on making a block the size I need then double sided tape the vaneer to it and use the router to trim it... Quick fast and easy.
I plan on making a block the size I need then double sided tape the vaneer to it and use the router to trim it... Quick fast and easy.
Same one I was going to get from them. Love your Rda, too.I bought this wrap from here: https://www.vaporskinz.com/products/textured-dark-tamo-wood-efusion-duo-dna200
Really nice quality, a lot better then the original.
Sent from my iPad using Tapatalk
Eh it's pretty nice.So
Those yellow sheets that came with my duo are the fucking 3m tape needed for my carbon fiber panels to stick
All this time I was thinking how the fuck do I install those carbon fiber?!
Sure enough today while re building my stuff I accidentally scratch the yellow panel it came off very easy, I was like wtf is this stick thing... Shit, it was the 3m I was asking for..
carbon n paper wood on each side LOL
VAPE ON
That white Kbox doh, pimpin.
How's it holding up?I bought this wrap from here: https://www.vaporskinz.com/products/textured-dark-tamo-wood-efusion-duo-dna200
Really nice quality, a lot better then the original.
Sent from my iPad using Tapatalk
It keeps up real good, have used it for about a month now with juice pouring over it and more... It looks like new and doesn't come off at all.
Highly recommended.
Hey guys, I am new to this but I just got my Efusion today. What is the best way to get this carbon fiber skin off?
I don't think you're supposed to take it off? I just put the skin over the carbon fiber.
I used an Xacto knife and took my time. Once you get enough of it off you can just pull it up. I did use the back of the blade not the sharp side. My adhesive stayed intact so I can reuse them. I just stuck them on a piece of paper that had stickers on it prior.
Mine came with carbon fiber look alike I wouldn't exactly call it carbon fiber.
Sent from my SAMSUNG-SM-N910A using Tapatalk
Sent from my SAMSUNG-SM-N910A using Tapatalk
I know it had to come off because I've read that if you try and lay it over the carbon fiber that you would have a little lip that would be raised up. Thanks for all of the input guys. Very much appreciated!
Success. Hair dryer for a few seconds and it came off perfectly. All I did was stick the carbon fiber on the back of the wood panels and it actually is bad ass because it is keeping the wood from bowing on the box...
Attachments
Sent from my SAMSUNG-SM-N910A using Tapatalk
Both of my Duo's came with carbon fiber side panels installed and no button rattle 
Vt133 in the middle for size reference
Vt133 in the middle for size reference
MFS & vapeNW had them for 128.00 on Monday. Came with all the covers and the 3s lipo. I love to get the Silver Duo.... one day
MFS & vapeNW had them for 128.00 on Monday. Came with all the covers and the 3s lipo. I love to get the Silver Duo.... one day
Any coupon?
VAPE ON