My guy at the vape shop just gave me this RDTA because he didnt feel like playing around with it and he doesnt have any RDTA's in his shop. So i took it because it was free. But now i dont know anything about it. Its not like my other tanks
Become a Patron!
how the hell do i build on this!
- Thread starter chasingclouds93
- Start date
@pulsevape, paging @pulsevape
Reminds me of an old school genny. ALMOST looks like there's a hole in front of one of the posts, hard to tell.
@chasingclouds93 can you post a pic of the top view?
@chasingclouds93 can you post a pic of the top view?
The screw comes off and this is whats under it.
For the outer posts simple, unscrew, wrap the coil leg around the pole and screw back down.
For the center post will have to see it from a better angle or unscrewed more to know.
For the center post will have to see it from a better angle or unscrewed more to know.
lordmage
The Sky has Fallen. the End is Here.
Staff member
Senior Moderator
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
Send it over, I'll test it for you and let you know 
it appears to be a dual coil genny with a fill hole..what is the name of the atty?usually built with two stainless steel mesh vertical wicks.dual coil gennys are a pain in the ass for even experinced genny users for a newbie they'f be maddening....there is no reason you are forced to us both wick holes, if you want you could just use one of the wickholes and leave the other one alone....however unless there is a fill screw for one of the wickholes it appears to be for the exclusive use of dual wicks...or for making "U" wicks..regardless it is a queer looking duck and if it is a genny I'd suspect its one of the first incarnations or some chinese atty.it is very odd that the negative leads are trapped so far from the base of the deck.also it seems the groove in the center post should run in the same line as the wickholes and not perpendicular to them.
Last edited:
where did you get that picture? if those are ceramic wicks the only white ceramic wick I know of is the BD 13 which only a few people every had acssess to, or they are homemade wicks.....though I recently came across somebody selling a white ceramic wick recently...
not the best but gives you an idea of how it should look if a genny rdta
lordmage
The Sky has Fallen. the End is Here.
Staff member
Senior Moderator
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
bd13 is exactly what that is http://www.head-fi.org/t/664515/vape-fi/1590#post_12126947
Genny.....or also called a genesis atomizer....If it came from a vape shoppe its probably an RSST....worth the time to learn to wire it, but mine is a lounge chair companion as they are fidgety and leaky...
Dont get me wrong, the flavor is amazing and the vape is thick.
Youll need either Stainless steel mesh or ceramics for wick, some cotton to wrap the top and about 2 hours to view all of the Youtube video's.
Or, buy a Boreas and skip the endless hair pulling!
Dont get me wrong, the flavor is amazing and the vape is thick.
Youll need either Stainless steel mesh or ceramics for wick, some cotton to wrap the top and about 2 hours to view all of the Youtube video's.
Or, buy a Boreas and skip the endless hair pulling!
Messed around with it for a few hours. Got it figured! I was using 24g wire and apparently that was too much so instead I used 28g and it works like a charm! Gonna take some practice but that's what this hobby is about haha thanks guys!
yeah gennys as a rule are a MTL vape there are some exceptions like the Origenny, or the kraken,but as a rule they are not a sub ohm set up...I usually vape a modified single coil genny at about .75-.8 but it for stock gennys a lot of people vape them .1-1.2 so with a dual coil genny you can half that......if you can get the airflow.
Last edited:
I was lucky enough to be one of the beta testers for that wick...it's a great wick unfortunately the guy who made them never went into mass production