we are designing a mech mod, any suggestions? we will send sample to the best suggester. Thanks!
Become a Patron!
we are designing a mech mod, any suggestions?
- Thread starter CthulhuMod
- Start date
Make it small, 2 batteries and a squonker. Parallel and series versions or convertible.
Sent from my SCH-I605 using Tapatalk
Sent from my SCH-I605 using Tapatalk
UncleRJ
Will write reviews for Beer!
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Reviewer
Moderator
Do a high quality compact and lightweight build.
Also provide a permanent finish to the outside that will not wear off over time.
And a easy to remove battery cover that will not fall off during use!
Also provide a permanent finish to the outside that will not wear off over time.
And a easy to remove battery cover that will not fall off during use!
- Create one that has three tubes 350/500/650, with different styles on the outside. (Clean, Flashy, Bright, Rough textured, Copper) Each sold separately or bought as a package deal for all styles in one box.
- Parallel wired battery bank
- Have several colors to choose from, a splatter look as optional maybe.
- Have it sit flush with whatever popular mm wide tank/RDA that sits on top.
- Having a switch that is made with a silver plated spring and a copper contact
- Being able to replace the firing springs with two different tension options for adjustable throw
- Being able to choose between hybrid atomizer-to-battery or standard 510 adjustable topcaps.
- Having a connection pin for the atomizer that is fully adjustable
- A lock for the firing button.
- Must have vents or air holes for batteries.
- Having telescopic and collapsible options.
Last edited:
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Box mod dual 18650 style, no squonk
Parallel for lower voltage and safer
locking firing pin
lightweight (rubberized plastic maybe or rubberized zinc alloy)
volt meter
pot for adjustments
replaceable fuse for safety
centered 510 pin for larger tanks with no overhang
wide enough to handle 30mm attys
air vents for batteries
magnet battery door
replaceable battery door and side face plates (like the limitless box mod)
options for stabilized wood, leather, and abalone plates
magnetic fire button with replaceable button to match side plates
comes with matching 510 drip tip (and other options to match the plates and fire button)
wide variety of colors
gold plated copper 510 pin spring loaded for a wide range of attys
shrink tubing on all soldered areas
large surface area battery contacts
nice looking logo on box
Parallel for lower voltage and safer
locking firing pin
lightweight (rubberized plastic maybe or rubberized zinc alloy)
volt meter
pot for adjustments
replaceable fuse for safety
centered 510 pin for larger tanks with no overhang
wide enough to handle 30mm attys
air vents for batteries
magnet battery door
replaceable battery door and side face plates (like the limitless box mod)
options for stabilized wood, leather, and abalone plates
magnetic fire button with replaceable button to match side plates
comes with matching 510 drip tip (and other options to match the plates and fire button)
wide variety of colors
gold plated copper 510 pin spring loaded for a wide range of attys
shrink tubing on all soldered areas
large surface area battery contacts
nice looking logo on box
Thank you!Just some stuff I pulled from other mods that I have seen in the past that caught my eye.
- Create one that has three tubes 350/500/650, with different styles on the outside. (Clean, Flashy, Bright, Rough textured, Copper) Each sold separately or bought as a package deal for all styles in one box.
- Parallel wired battery bank
- Have several colors to choose from, a splatter look as optional maybe.
- Have it sit flush with whatever popular mm wide tank/RDA that sits on top.
- Having a switch that is made with a silver plated spring and a copper contact
- Being able to replace the firing springs with two different tension options for adjustable throw
- Being able to choose between hybrid atomizer-to-battery or standard 510 adjustable topcaps.
- Having a connection pin for the atomizer that is fully adjustable
- A lock for the firing button.
- Must have vents or air holes for batteries.
- Having telescopic and collapsible options.
Thank you.
Honestly, your company is named after a being created by H.P. Lovecraft. Do the man proud and give the mod a design aspect of Lovecraft horror, possibly include the runes and the Great Old Ones. It would honestly look sick as hell. If you are making a tube mod, maybe base the outside design on the Cthulhu statue. Maybe come out with a few different mods, each named after the Old Ones. Just a thought.
@CthulhuMod How has the mech mod design process been going so far?
Parallel/series design.
Rounded sides.
Volt meter.
NOT a hybrid.
Can accommodate 25mm atty.
Leather panels/body cover.
Silver contacts.
Rounded sides.
Volt meter.
NOT a hybrid.
Can accommodate 25mm atty.
Leather panels/body cover.
Silver contacts.
They designing a mech.... your description is for a regulated or wired mod... mechs don't have electronics or wires. Therefore no pots or meters. Magnetic switch would be of no benefit to a wired mod.
Sent from my SCH-I605 using Tapatalk
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
I kinda mixed together a bunch of ideas os stuff that's good for unregulated mods and a mech mod. It's all just suggestions
Sent from my SM-G935V using Tapatalk
If its a tube mod have nice deep engraved logos or designs so when cleaning no worries of anything wearing off over time .
Also no finicky battery rattle adjustments, something like the AV Able top cap design or Kennedy Ruby/Roundhouse button that you simply tighten to eliminate the rattle.
I don't even mess with Mechs now if the battery adjustment is a pain.
PM for discounted EV Liquids
50ml for $13 !!!
Also no finicky battery rattle adjustments, something like the AV Able top cap design or Kennedy Ruby/Roundhouse button that you simply tighten to eliminate the rattle.
I don't even mess with Mechs now if the battery adjustment is a pain.
PM for discounted EV Liquids
50ml for $13 !!!
If a box design would be nice to have a quality sleeve not cheap silicone crap that you could use to protect the finish when you want but also have easy access to the batteries at the same time .
I can handle bottom of mod getting marks since you never really see that part of it .Dealing with those damn silicone sleeves when switching batteries on the fly though is a pain in the ass lol
PM for discounted EV Liquids
50ml for $13 !!!
I can handle bottom of mod getting marks since you never really see that part of it .Dealing with those damn silicone sleeves when switching batteries on the fly though is a pain in the ass lol
PM for discounted EV Liquids
50ml for $13 !!!
This!