Jumpin jehosafat

[Vape7od]

I built a dual fused clapton 2x26ga ni80 fused with 32 ga.. It was a 3mm ID 5 wraps spaced that first came to 0.51 on my kayfun 5 clone. Then at next look the resistance jumped up to .63 than to .57 and it continues to jump around. I made sure the leads for tightly secured and still the resistance jumped uo n down. Then i checked to make sure my 510 pin was tightened up.. Still jumpin like a 64 chevy in east LA.. So i cant come up with anything else.. The wire i used was a pre-fused geekvape wireshot, the only conclusion i could think of is that maybe its a bad wire but it appears to be ok by the looks of it.. You guys have any thoughts on maybe something that i am not seeing...

Sent from my LGMS631 using Tapatalk

 

[mikekscholz]

I believe its just the nichrome rising in resistance relative to the temperature. when you fire it the ohms go up as it heats, and back down as it cools. when you click the button again it will re-read the resistance,

 

[Vape7od]

I believe its just the nichrome rising in resistance relative to the temperature. when you fire it the ohms go up as it heats, and back down as it cools. when you click the button again it will re-read the resistance,

I think you were right because i went ahead and wicked it and juiced it now its holding an even resistance reading

Sent from my LGMS631 using Tapatalk