Question regarding KangerTech Subox Mini

[k_tran94]

1. Do I ever need to soak the cotton with ejuice after I assemble the tank in? The tank where I fill with ejuice is naturally going to soak the cotton as I go, right?

2. What are the best settings for maximum vapor production? I am currently using 100% VG. Is it possible to change the ohms? Also, there are 4 holes for air control: 2 on the left, 2 on the right. Is the hole farthest right the one with the maximum air flow?

3. I want a lung hit, so how do I change the settings to do so?

As you can tell I'm a beginner vaper.

 

[SnapDragon NY]

Hi k_tran- Yes you need to prime the coil with eliquid, a few drops on the outside holes on the white cotton and a drop or 2 down the center but close to the edge not right down the middle Also start out slow like 20w and then go up 5w at a time to break in the coil. Ohms are changed by the coil you use like 0.5 sub ohm and the 1.5 above ohm. You will get more vapor from the 0.5 ohm. I only use kanthal coils- NO NI in temp control. The coils list the watts range on the coil
Didn't you get an instruction booklet, really nice to read about it. Also there are many You Tube videos for the beginning Vaper that are very helpful. Type in KangerTech Subox Mini and there will be many You Tube videos showing you how it works.

 

[avyrus666]

As you can tell I'm a beginner vaper.

Subox kits are great for beginners btw. I still use my nano daily. Person before me pretty much covered it though.

Sent from my LG-K550 using Tapatalk