Become a Patron!
Boreas RTA O-ring
- Thread starter John M
- Start date
Drip tip (2) 8 x 1
Top of chimney stem (where fill ports are) 9 x 1
Top cap 18 x 1
Glass tank seals (2) 24 x 1
Bottom of chimney stem 10 x 1
Top of afc ring 18 x 1
Below afc ring, on chamber (2) 17 x 1
510 base: large one is 18 x 1, in bottom is 11 x 1.2
Deck 12 x 1
Would be one of these, no? I have a Boreas, but don't use it....this is all I have regarding orings.
510 base: large one is 18 x 1, in bottom is 11 x 1.2
Deck 12 x 1
Whoops...I meant 11 x 1.2
Got this a while back from Roxy
O RING SIZES
Drip tip (2) 8 x 1
Top of chimney stem (where fill ports are) 9 x 1
Top cap 18 x 1
Glass tank seals (2) 24 x 1
Bottom of chimney stem 10 x 1
Top of afc ring 18 x 1
Below afc ring, on chamber (2) 17 x 1
510 base: large one is 18 x 1, in bottom is 11 x 1.2
Deck 12 x 1
O RING SIZES
Drip tip (2) 8 x 1
Top of chimney stem (where fill ports are) 9 x 1
Top cap 18 x 1
Glass tank seals (2) 24 x 1
Bottom of chimney stem 10 x 1
Top of afc ring 18 x 1
Below afc ring, on chamber (2) 17 x 1
510 base: large one is 18 x 1, in bottom is 11 x 1.2
Deck 12 x 1
There are actually 2 o-rings on the bottom cap. Look again. there is one inside small o-ring that butts up against the 510/bottom of the deck AND one that goes on the outer threads of the bottom cap.
The person who provided the list of o-rings for the Boreas is the woman that designed it...I think she knows. Also I just took the bottom of mine and...there they are, 2 o-rings.
Take a closer look. It could be you are missing BOTH of them. But that would probably be leak city.
John M
Member For 4 Years
OK wait Sorry my Bad.
The one I Need is the inside small o-ring that butts up against the 510/bottom of the deck,
I was getting confused it didn't seem like the replies I was getting were related to what I needed..
I do see the other one now, Sorry.
So it the inside oring I need then it FITS Very Loose and Real Easy Lose!
Sounds like its the 11 x 1.2
And I had no idea I was communicating with the designer Sorry for my Misunderstanding!
The one I Need is the inside small o-ring that butts up against the 510/bottom of the deck,
I was getting confused it didn't seem like the replies I was getting were related to what I needed..
I do see the other one now, Sorry.
So it the inside oring I need then it FITS Very Loose and Real Easy Lose!
Sounds like its the 11 x 1.2
And I had no idea I was communicating with the designer Sorry for my Misunderstanding!
No problem JM66...that outside one is easy to miss! Especially if you have the black Boreas with a black o-ring!! LOL
Yeah, the one you want is the 11x1.2 that fits the inside ... yes, easy to lose when washing up the unit. I keep my thumb in there when I am rinsing it out!
The designer is a woman named Roxy...you can see her name on the bottom of the Boreas AND Merlin. She used to be on this thread all the time and was extra helpful to all of us Boreas owners.
Good luck with yours, my 3 are fantastic vapes.
Yeah, the one you want is the 11x1.2 that fits the inside ... yes, easy to lose when washing up the unit. I keep my thumb in there when I am rinsing it out!
The designer is a woman named Roxy...you can see her name on the bottom of the Boreas AND Merlin. She used to be on this thread all the time and was extra helpful to all of us Boreas owners.
Good luck with yours, my 3 are fantastic vapes.
John M
Member For 4 Years
Well it Looks Like a Very Very SAD Day!!!
3 Hardware Stores Latter and a Good Google Hunt
NO LUCK!!!
Sorry but it looks like its going in the Discard Pile.
I wont Ever Purchase another one.
Must be a China Only O-ring
Biggest Waste of my $
I am disabled on SDI I cant afford this kind of stuff...
3 Hardware Stores Latter and a Good Google Hunt
NO LUCK!!!
Sorry but it looks like its going in the Discard Pile.
I wont Ever Purchase another one.
Must be a China Only O-ring
Biggest Waste of my $
I am disabled on SDI I cant afford this kind of stuff...
John M
Member For 4 Years
I am pretty I sure I read that whole thread also and I didn't see anything.
I even wrote Augvape So I will wait and hear from them.
Its sad I like the tank a lot.
I just don't have a lot of $ for shipping costs..
TY if you have the time, don't go out of your way for me please...
I even wrote Augvape So I will wait and hear from them.
Its sad I like the tank a lot.
I just don't have a lot of $ for shipping costs..
TY if you have the time, don't go out of your way for me please...
I actually think either of these will work.
https://www.fasttech.com/products/3023/10006430/4616908
https://www.fasttech.com/products/3023/10006430/2066607
https://www.fasttech.com/products/3023/10006430/4616908
https://www.fasttech.com/products/3023/10006430/2066607
jackmormon
Member For 4 Years
I think these would also work:
http://www.oringsandmore.com/metric-buna-o-rings-11-x-1-2mm-price-for-25-pcs/
http://www.oringsandmore.com/metric-buna-o-rings-11-x-1-2mm-price-for-25-pcs/
John M
Member For 4 Years
Thank You for the Links.
I had closed my Fasttech account.
So I will save the 2nd link
I cant afford them right now but I know where to get them..
You know what for almost $7. for a not even .5 cent part I need
Its not even worth fixing to me...........
Thank you all for your time..
I had closed my Fasttech account.
So I will save the 2nd link
I cant afford them right now but I know where to get them..
You know what for almost $7. for a not even .5 cent part I need
Its not even worth fixing to me...........
Thank you all for your time..
Last edited:
John M
Member For 4 Years
Well I may just be saved
Will this one work?
They are kind of local to me.
https://www.fastenal.com/products/d...egoryl3:"603580 O-Rings"|~ ~|sattr05:^11mm$|~
Will this one work?
They are kind of local to me.
https://www.fastenal.com/products/d...egoryl3:"603580 O-Rings"|~ ~|sattr05:^11mm$|~