Become a Patron!

Looking for a few new mods under 100w

Garemlin

Gold Contributor
Member For 4 Years
ECF Refugee
Decided to upgrade some of my dated mods. Just picked up a Pico to take to work but I'd like to get a few more for home and going out. Don't care about TC ability and how good TC works. I only use wattage. Does not really need to be any higher than 80w as I rarely go above 30-40w. I don't want to mess with anything in low wattage because I would like to have the ability to go 50-60w when the mood strikes me. Must use an 18650 or have the ability with an adapter. Would like it to fit a 25mm tank without overhang.

I've been looking around and ones like the Vaporesso Target, Fuchai Mini, Vaporshark SwitchBox, IPV D3 and HCigar VT75.


Suggestions???
 

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
Vaporesso Target Pro is the update to the previous but even though it reduces from the 200 watt to 160 watt, it now no longer is under powered.
 
Last edited:

EMusic

Gold Contributor
Member For 3 Years
Member For 2 Years
Vaporesso Tarot Nano. It is very small and goes up to 80W and works great in wattage mode. I love mine.
 

Garemlin

Gold Contributor
Member For 4 Years
ECF Refugee
Vaporesso Target Pro is the update to the previous but even though it reduces form the 200 watt to 160 watt, it now no longer is under powered.

The Vaporesso Target Pro I was looking at is 75w. Are there different versions?


Tap'd from my 7+
 

Garemlin

Gold Contributor
Member For 4 Years
ECF Refugee
Vaporesso Tarot Nano. It is very small and goes up to 80W and works great in wattage mode. I love mine.

Doesn't take an 18650. I don't want to mess with anything with a built-in battery. Shame because I kinda like the look with the atty in the center.


Tap'd from my 7+
 

Mike H.

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
The IPV D3S is a solid power mod...I got mine for 19.99 a ecig.com but only available in blue or silver...Uses the Yihi SX150 chip so it should be reliable...Its good for 80w on a single 18650.

Worth a look if you like a compact mod..certainly wont find anywhere near a better price for one.
https://www.ecig.com/pioneer-ipvd3s-mod.html
 
Last edited:

Mike H.

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Mistake made..its saying blue or white...I was fortunate enough to get one in silver...they ship from USA as well..got mine in about 4 days..i think its a USA based company.
 

Garemlin

Gold Contributor
Member For 4 Years
ECF Refugee
The IPV D3S is a solid power mod...I got mine for 19.99 a ecig.com but only available in blue or silver...Uses the Yihi SX150 chip so it should be reliable...Its good for 80w on a single 18650.

Worth a look if you like a compact mod..certainly wont find anywhere near a better price for one.
https://www.ecig.com/pioneer-ipvd3s-mod.html

That's the one I really want and want it in blue. Most places seem to be out of stock. For that price I might grab two. Would a 25mm fit without overhang or is it meant to work more with a 22mm?

Is ecig.com a US vendor? never dealt with them.


Tap'd from my 7+
 

Mike H.

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
That's the one I really want and want it in blue. Most places seem to be out of stock. For that price I might grab two. Would a 25mm fit without overhang or is it meant to work more with a 22mm?

Is ecig.com a US vendor? never dealt with them.


Tap'd from my 7+
hold on ill check...id snap a shot but I haven't replaced my phone.
 

Mike H.

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
I tried a Billow V3 plus and a Crius Plus and both fit exactly flush with the edges so id have to say yes 25mm fits it...its a tiny mod and looks pretty good with a 25mm tank.
 

Mike H.

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
screw it, im ordering another one just to have it..Be back in a few minutes..lol
 

Mike H.

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
they are USA based from what I can see..I got mine in 4 days my last order from them..Chinas not that fast...lol
 

Mike H.

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
ok, now I have a silver and a blue one..wish they had one in white:(
 

skt239

VU Donator
Platinum Contributor
Member For 4 Years
Dang that's cheap...

I should have included the IPV D2, its my oldest and most reliable single 18650. I don't use it much anymore but its still a good one.

I think I'm getting one of those blue D3's.
 

Mike H.

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Dang that's cheap...

I should have included the IPV D2, its my oldest and most reliable single 18650. I don't use it much anymore but its still a good one.

I think I'm getting one of those blue D3's.
JUST DO ITTTTTTTTTT!!!!!!!!!!!!...Its really nice and you cant beat the price anywhere.
 

Garemlin

Gold Contributor
Member For 4 Years
ECF Refugee
I love single 18650 mods. Here are my 3 current favorites...

View attachment 74264

HCigar Nano DNA75
Evic VTC Mini
Snow Wolf 75w

IMO the best of the three is the evic VTC. It's also the least expensive.

I've had an Evic Mini for about a year. I like it but I don't use it much because many of my attys do not screw all the way down and they have a slight wobble. It is only if I push on them. Not just moving it around. Still messes with my OCD. LOL


Tap'd from my 7+
 

Garemlin

Gold Contributor
Member For 4 Years
ECF Refugee
Dang that's cheap...

I should have included the IPV D2, its my oldest and most reliable single 18650. I don't use it much anymore but its still a good one.

I think I'm getting one of those blue D3's.

I still have and use my IPV Mini 30w. Always liked the form factor. It looks like it has been through a war but still works fine. Finish peeled off so I took my dremel to it. The only issue I ever had with it is the pitch on the battery cap is really fine and hard to catch.


dd118f8f1c25594f8d85a30a3563bc19.jpg



Tap'd from my 7+
 

Mike H.

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
I still have and use my IPV Mini 30w. Always liked the form factor. It looks like it has been through a war but still works fine. Finish peeled off so I took my dremel to it. The only issue I ever had with it is the pitch on the battery cap is really fine and hard to catch.


dd118f8f1c25594f8d85a30a3563bc19.jpg



Tap'd from my 7+


I like that finish.
 

Mike H.

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
I have a
It's a work in progress. Gonna do a bit more to it and get some of the nooks and crannies when I get a chance.


Tap'd from my 7+
I have a SX mini M class coming to me that im going to refurbish...I was thinking the center fully polished with a black, blue or red carbon fiber for the sides.
 

skt239

VU Donator
Platinum Contributor
Member For 4 Years
I have a

I have a SX mini M class coming to me that im going to refurbish...I was thinking the center fully polished with a black, blue or red carbon fiber for the sides.
Did you get one of birds?
 

Mike H.

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Did you get one of birds?
yea..I got the one with the silver center but all the scratches/chips on the sides...not a fan of all black mods although I did buy one of the Hcigar VT75,s that was on here as well that's all black..just wanted a dna device and price was right.
 

skt239

VU Donator
Platinum Contributor
Member For 4 Years
yea..I got the one with the silver center but all the scratches/chips on the sides...not a fan of all black mods although I did buy one of the Hcigar VT75,s that was on here as well that's all black..just wanted a dna device and price was right.
Well done.

I had my eye on both of those.
 

skt239

VU Donator
Platinum Contributor
Member For 4 Years
I still have and use my IPV Mini 30w. Always liked the form factor. It looks like it has been through a war but still works fine. Finish peeled off so I took my dremel to it. The only issue I ever had with it is the pitch on the battery cap is really fine and hard to catch.


dd118f8f1c25594f8d85a30a3563bc19.jpg



Tap'd from my 7+

That finish does look great.

When my IPV Mini 70w's paint chipped away, I just slapped a stupid sticker on it. Still runs like a champ...

The ultimate beater setup...

IMG_8922.JPG
 

Eskie

Silver Contributor
Member For 3 Years
The IPV D3S is a solid power mod...I got mine for 19.99 a ecig.com but only available in blue or silver...Uses the Yihi SX150 chip so it should be reliable...Its good for 80w on a single 18650.

Worth a look if you like a compact mod..certainly wont find anywhere near a better price for one.
https://www.ecig.com/pioneer-ipvd3s-mod.html

That's a really nice price. I had to grab a silver one. I'll only use it in wattage, but for $20 ($22.15 with shipping after the 10% off) it's hard to complain. I love Ecig. I got my Alien from them on a flash sale for ~$40 mod only but 2 LG batteries. When they have a deal, it's almost always a good one.
 

Mike H.

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
That's a really nice price. I had to grab a silver one. I'll only use it in wattage, but for $20 ($22.15 with shipping after the 10% off) it's hard to complain. I love Ecig. I got my Alien from them on a flash sale for ~$40 mod only but 2 LG batteries. When they have a deal, it's almost always a good one.
I would post 2 more deals I found but having communication issues with this particular company and still don't have my order but its an IPV5 for $29.99 and an they also offer the IPV400 for $29.99..if they don't screw me and I get my item ill post up a link to the site...Also I know a place that's selling the Joyetech Cuboid 150 for $29.99 but only in black.
 

chris.ardito.3

Silver Contributor
Member For 4 Years
Another option is the Coolfire 4 18650. Up to 75W and takes 1 18650 battery.

Edit:Forgot another one, the Wismec Presa 100, 1 18650 or 26650

The presa 100w has the battery issue with 26650. Weak battery


Sent from my iPhone using Tapatalk
 

CDroverNL

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
I have been using a UD Balrog for more than a year now and it's still going strong. I can't speak for the new version, but the first one without SS temp control is the one I've been using.
 

snake94115

Diamond Contributor
Member For 4 Years
I have been using a UD Balrog for more than a year now and it's still going strong. I can't speak for the new version, but the first one without SS temp control is the one I've been using.
Could have sworn the original had SS temperature control

Sent from my HT3 Pro using Tapatalk
 

VU Sponsors

Top