Have you tried turning the bottles with each refill?....the bottles last much longer.Anyone found any softer bottles that can be used with the Coppervape and still retain the screw on top cap? The first bottle I used eventually started to stay in a semi-squeezed status.
Chris
Hey Res,
PM your address, if you are in the US I will PIF you a bottle
Have you tried turning the bottles with each refill?....the bottles last much longer.
Thanks for the info. I do turn the bottles in my Pico Squeeze and Sonic squonkers. But, the Coppervape bottle is threaded into the cap which is threaded into the 510. I don't see how I can turn it without unscrewing it and losing the seal.
Is this wrong?
Chris
It could be harder to rotate than other squonk bottles, where you can rotate the bottle by rotating it by the tubing
The tube is attached to the inside of the bottle cap and turning the tube doesn't change the orientation of the bottle to the cap. The cap is screwed onto the bottle and if I leave it less than tight then air escapes. The cap is screwed onto the bottom of the 510 and it provides tension to the flat spring that holds the fire button up and if left less than tight then the fire button won't return properly.
I just don't see any way to turn the bottle on this mod.
Chris
Obscenely over priced...
Obscenely over priced but they are the best you can find. Made from surgical Silicon and work absolutely wonderful.
http://www.vapinart.com/cart/Sunbox-Cappy-V4-bottle-10-ML-P3941.aspx
Sent from my Nexus 6 using Tapatalk
Dainty?Wow. Thanks for the heads up but my hands aren't that dainty. I'll find a way to handle the harder bottles.
Chris
Dainty?
It's a 10ml bottle
Sent from my Nexus 6 using Tapatalk
Yeah, exactly. I can't see paying $28 (which is what I paid for the mod) to get a softer bottle. I'll just use the stock bottles and replace them when they go bad at $.60 each.
Chris
So much for that idea....I wasn't familiar with that mod, even though I have four of them in unopened boxes.....Thanks for the info. I do turn the bottles in my Pico Squeeze and Sonic squonkers. But, the Coppervape bottle is threaded into the cap which is threaded into the 510. I don't see how I can turn it without unscrewing it and losing the seal.
Is this wrong?
Chris