Single coil flavor atty

[cswed]

I'm in love with my Entheon, running it with the Hadeon top cap and got it set up for squonk mode. Have a KA1 28ga*2 twisted wrapped in 32ga fused clapton in it reading at .34 ohms and vaping at 43 watts. It is so far my favorite RDA ever in this set up with the Hadeon cap.
So what is everyone's favorite single coil flavor atty? Have you tried the Entheon/Hadeon and what do you think?

 

[Heartsdelight]

I’m enjoying my SXK Entheon clone.

 

[sickbxy]

My ADV rotation is the AlianceTech Flave 22mm on the Dotsquonk and the ESG Skyline RTA on the Dicodes Dani 3. Both are running SS Clapton variants between that ohm out between 0.4 and 0.6.

 

[cswed]

I’m enjoying my SXK Entheon clone.

Awesome. Just recently sold an SXK Entheon, loved it enough to purchase an authentic Entheon. I will say that the clone is scary close to the authentic. However the RDA is good enough to me that the authentic was a must have. The Hadeon cap, which turns the Entheon basically into a squonk friendly Hadaly is 100% the price of admission for the authentic in my opinion.

 

[cswed]

My ADV rotation is the AlianceTech Flave 22mm on the Dotsquonk and the ESG Skyline RTA on the Dicodes Dani 3. Both are running SS Clapton variants between that ohm out between 0.4 and 0.6.

The flave looks like a great single coil atty. It looks very similar to the Entheon, My go to RTA is the Wake RTA. Do you have any experience with Psyclone mod products? What do you like about the Flave?

 

[inspects]

I bought a half dozen of the Le Supersonic's....pretty damn good attys, being clones.

Flavorful indeed......

 

[inspects]

Hard for me to beat the Narda's...but haven't tried a clone, I assume their prolly just as good, and 90 bucks less.

Wasp Nano is pretty damn good too....and CHEAP.

 

[cswed]

Hard for me to beat the Narda's...but haven't tried a clone, I assume their prolly just as good, and 90 bucks less.

Wasp Nano is pretty damn good too....and CHEAP.

Recently just sold a Wasp Nano, I agree it was great for a cheap atty. I've heard good things about the Narda, I'd like to check one out but they are hard to find now aren't they? Since I got my Goon 1.5 and LP and not really falling in love with them, I've been on the hunt for higher end, single coil flavor attys. However I think I may have found my go to in the Entheon/Hadeon.

 

[inspects]

However I think I may have found my go to in the Entheon/Hadeon.

Yup, those are good too.

 

[choderfett]

Anyone try that ReCurve yet?

 

[inspects]

Anyone try that ReCurve yet?

Was thinking about it, but I've gone backwards, to tottle puffin again.....

 

[Heartsdelight]

My ADV rotation is the AlianceTech Flave 22mm on the Dotsquonk and the ESG Skyline RTA on the Dicodes Dani 3. Both are running SS Clapton variants between that ohm out between 0.4 and 0.6.

So I imagine the flavor is great on the Flave 22mm rdta?

 

[stanglifemike]

Anyone try that ReCurve yet?

I've checked all of my local shops and no one has it, and online sites only have gold and rainbow left. I'm expecting to be able to get one in black later today at Vape Showcase in Atlanta, so I'll be super disappointed if not. Hopefully I'll have an opinion on it within the next 12 hours!

Sent from my SM-N950U using Tapatalk

 

[Heartsdelight]

I've checked all of my local shops and no one has it, and online sites only have gold and rainbow left. I'm expecting to be able to get one in black later today at Vape Showcase in Atlanta, so I'll be super disappointed if not. Hopefully I'll have an opinion on it within the next 12 hours!

Sent from my SM-N950U using Tapatalk

On this thread I asked Anthony aka Sir Richard Rear about the Recurve, this is what he had to say

http://vapingunderground.com/threads/anthony-vapes-augvape-templar-rda-review.410376/#post-2133324

But, I think a tighter draw would be something I would enjoy.

 

[stanglifemike]

On this thread I asked Anthony aka Sir Richard Rear about the Recurve, this is what he had to say

http://vapingunderground.com/threads/anthony-vapes-augvape-templar-rda-review.410376/#post-2133324

But, I think a tighter draw would be something I would enjoy.

That's odd, I haven't heard anyone NOT impressed by it. Everybody has been raving about the Recurve, and many are saying it's the best flavor they've ever had in any RDA.
I'm sold, just gotta find one

Sent from my SM-N950U using Tapatalk

 

[Matty Vapes]

I got my eye on the Dead Rabbit SQ 22 just haven't pulled the trigger yet

 

[stanglifemike]

I got my eye on the Dead Rabbit SQ 22 just haven't pulled the trigger yet

You should look elsewhere

Sent from my SM-N950U using Tapatalk

 

[Matty Vapes]

You should look elsewhere

Sent from my SM-N950U using Tapatalk

why's that? looks good to go

 

[stanglifemike]

why's that? looks good to go

Not if you're after flavor. Coil in the center with airflow slots on the side nowhere near it = subpar flavor. Check around and you'll see others agree

Sent from my SM-N950U using Tapatalk

 

[sickbxy]

So I imagine the flavor is great on the Flave 22mm rdta?

It is a very nice restricted DL

 

[SnapDragon NY]

My favorite is the Vandy Vapes Pyro RDTA
It can run in single or dual coil with the postless deck- I have been using mine as a single coil RDTA for months now, great flavor is easy to build and wick and refill and no leaking! I have 2 Pyros that I use with my Therions.
I am waiting for the Kindbright Flave RDTA single coil from FT to use with my Vt Inbox BF- right now I am using the Wasp Nano with that and I think I will like the Flave RDTA BF with the Inbox much better.
Should be at my house sometime next week. I hope!!!!

 

[CrazyChef v2.0]

Anyone try that ReCurve yet?

Yup. Got it in yesterday. It's a pretty good flavor atty.

 

[Carambrda]

Not the cleanest build I put in there, but... the Deathwish Modz 24mm Deathtrap RDA.

 

[cswed]

There's a couple I've been meaning to try too. Pulse 22, Recurve and a Kennedy 24 even though its not a single coil atty. Anyone have any experience with the Pulse or the Kennedy?

 

[CrazyChef v2.0]

I have both, and they're both great atties. But they each have their own distinct uses. But as for single coil RDAs, the Pulse 22 is fantastic. The Pulse 24mm kinda sucks compared to the 22mm, but is a dual coil RDA geared more towards squonking.

The Kennedy is one of the best RDAs out there - my personal preference being the 2 post version. But it's not a single coil RDA.

 

[cswed]

I have both, and they're both great atties. But they each have their own distinct uses. But as for single coil RDAs, the Pulse 22 is fantastic. The Pulse 24mm kinda sucks compared to the 22mm, but is a dual coil RDA geared more towards squonking.

The Kennedy is one of the best RDAs out there - my personal preference being the 2 post version. But it's not a single coil RDA.

My LVS has the Pulse 22. I guess I will be picking one up when I stop in there next, I've heard alot of good things about it and for the price it's worth a try. Debating whether I want to spend the money and order a Kennedy as well.

 

[CrazyChef v2.0]

My LVS has the Pulse 22. I guess I will be picking one up when I stop in there next, I've heard alot of good things about it and for the price it's worth a try. Debating whether I want to spend the money and order a Kennedy as well.

I''ll be adding a couple in my for sale thread. A red one and a blue one.

 

[Carambrda]

I have the 2-post Kennedy 24 (and 25), but I skipped the Pulse 22 because I really don't like the idea of a single round air tube placed vertically right at the center of the deck... I mean, it's got to leak if you just dump juice down the middle, and I think it limits options with regards to flavor as for how you want to build your coil, as there can be problems with spitback getting blown directly from the bottom up into your mouth as well as the airflow is focused too much towards the center of your coil and not enough towards the edges so, for me, it is just a poor attempt at trying to borrow─or steal─the bottom airflow design principle of the Kennedy RDAs. Granted, the Kennedy does not have a single coil option, but the Deathtrap RDA is a dedicated single coil RDA, it comes with a squonk pin as well, and, lo and behold, it does not have the aforementioned problems about the airflow, and also I find that the flavor is hard to... ehh, escape from with the Deathtrap RDA so that is why I skipped the Pulse.

EDIT: Sorry I got the Pulse 22 mixed up with the Govad RDA.

 

[CrazyChef v2.0]

I have the 2-post Kennedy 24 (and 25), but I skipped the Pulse 22 because I really don't like the idea of a single round air tube placed vertically right at the center of the deck... I mean, it's got to leak if you just dump juice down the middle, and I think it limits options with regards to flavor as for how you want to build your coil, as there can be problems with spitback getting blown directly from the bottom up into your mouth as well as the airflow is focused too much towards the center of your coil and not enough towards the edges so, for me, it is just a poor attempt at trying to borrow─or steal─the bottom airflow design principle of the Kennedy RDAs. Granted, the Kennedy does not have a single coil option, but the Deathtrap RDA is a dedicated single coil RDA, it comes with a squonk pin as well, and, lo and behold, it does not have the aforementioned problems about the airflow, and also I find that the flavor is hard to... ehh, escape from with the Deathtrap RDA so that is why I skipped the Pulse.

Have you even seen the Pulse 22?

 

[JuicyLucy]

More excellent single coil RDAs - yep Hadaly, but authentic beats all the clones I've also tried

Odis 16, and Chalice IV are fantastic, as is the super small Tiny Demon Killer, which is also very inexpensive

Small chamber single coil atties are they way to go - especially if you are a squonker

 

[Carambrda]

Have you even seen the Pulse 22?

Yeah my mistake sorry got it mixed up with the Govad RDA. I tried the Pulse 22 several many months ago... I remember it now, but I didn't care much for that one either─which is probably why I couldn't remember it right away.

 

[Heartsdelight]

It is a very nice restricted DL

Thanks!

 

[sickbxy]

Thanks!

The 24 is much more open of a draw but still maintain quite a bit of flavor.

 

[Michael H.]

Great...more to add to the list to try.

 

[Heartsdelight]

The 24 is much more open of a draw but still maintain quite a bit of flavor.

Great to know!

 

[Heartsdelight]

Great...more to add to the list to try.

 

[gopher_byrd]

I'm liking the GAS GR1. It comes with two airflow inserts, one for restricted DL that could maybe do MTL and a full DL insert. 22mm single coil and a very small chamber. It comes with a squonk pin which is mandatory for me. You can also get different colored top caps in both 22mm and 24mm for your larger mods.

For 24mm single coil my fave is the Gorge. There's lots of metal for the posts so the chamber is reduced producing good flavor.

Both atty's can fully close off the air so you can pocket them without leakage. Another plus is both can be purchased for under $30 for the authentics.

 

[Michael H.]

Pulse22 and Entheon I think will be a next purchase.

Is the SXK the best version or clone of the Entheon or something else?

Psyclone Entheon authentic $85 but who knows if I like a clone of it.

 

[uansari1]

why's that? looks good to go

Mike is right on...he tried to warn me and I didn’t listen. Sold the DR SQ for a loss within 4 days. The $12 Wasp destroys the DR SQ in terms of flavor. I’m really enjoying my Entheon clone with Hadeon cap and Flave 22 clone.

 

[cswed]

Pulse22 and Entheon I think will be a next purchase.

Is the SXK the best version or clone of the Entheon or something else?

Psyclone Entheon authentic $85 but who knows if I like a clone of it.

I had the SXK Entheon. I liked it so much I spent the money on the aunthentic. I must say, the SXK Entheon is pretty close to the authentic. What made a standout difference to me was when I used the Hadeon cap on my authentic. Also the SXK doesn't come with everything you get with an authentic in terms of drip tips and adapters and so on. Also yes, Pulse 22 will be my next purchase as well, followed by a Kennedy haven't decided on 24mm or 22mm yet though.

 

[Michael H.]

I had the SXK Entheon. I liked it so much I spent the money on the aunthentic. I must say, the SXK Entheon is pretty close to the authentic. What made a standout difference to me was when I used the Hadeon cap on my authentic. Also the SXK doesn't come with everything you get with an authentic in terms of drip tips and adapters and so on. Also yes, Pulse 22 will be my next purchase as well, followed by a Kennedy haven't decided on 24mm or 22mm yet though.

I found 3 more Entheon clones...shenray, kindbright and ytfk....might try the Shenray version as they ended up with the best Hadaly clone so maybe another great one there.

I've been using a Kennedy 25 with dual post (copper) on my dual battery mech mods...I got a cheap fasttech version but man I'm impressed with both flavor and cloud production...I'll bet an authentic is amazing.

 

[Heartsdelight]

Pulse22 and Entheon I think will be a next purchase.

Is the SXK the best version or clone of the Entheon or something else?

Psyclone Entheon authentic $85 but who knows if I like a clone of it.

I have the SXK ENTHEON & I’m real happy with it.

 

[Michael H.]

I can't wait to try one

 

[PoppaVic]

I'm actually shopping for one more rta.. Single coil.. Something with a bit more airflow than the Rose v3, Taifun gt III, or Monster v2's.. I think that Coil Master rta might be the ticket - the Ammit single just strikes me as a bit pricey and too weird to trust.

 

[Michael H.]

I have an Ammit...air flow isn't that bad...it's certainly more than my GT3 provides.

 

[PoppaVic]

I have an Ammit...air flow isn't that bad...it's certainly more than my GT3 provides.

Yeah, I figured that much - but Elfy about $10 cheaper and looks simpler (to me). I may be wrong, but I am definitely getting into my cheap side again: I can try more for less, and PIF or sell the stuff I am unenthusiastic about.

I'm not sure "360 airflow" is worth $10 more of my hard-earned dollars. And, heh - I'm looking for a nice fit on the Sx-Mini, (which will likely see a stripping and paint tomorrow ;-).

 

[Dropmyload]

I have a Narda clone that I love. But I also have narca and entheon clones incoming, so will decide which authentic to buy after comparing all 3.

 

[cswed]

A little off topic, but has anyone had any experience with the Tsunami? Perhaps as a cheaper alternative to a Kennedy? Maybe someone who has a Tsunami and Kennedy can chime in.

 

[cswed]

I have a Narda clone that I love. But I also have narca and entheon clones incoming, so will decide which authentic to buy after comparing all 3.

Seems that all the really good single coil flavor attys tend to be higher end and higher priced. I wouldn't mind trying out a NarDa or a Le Supersonic as well.

 

[stanglifemike]

I finally got the Recurve on Saturday!! I was happy to see Wotofo had a booth at Vape Showcase Atlanta. I've been using the Recurve for a couple days now and really love it.

I think the curves look really good

Sent from my SM-N950U using Tapatalk