So, I posted about my good fortune winning ejuice from Kidney Puncher on Mod Envy, again, props to all involved and a big thank you.
Now, I don't use my dripper much since it eats juice, and I've only gone down to .6, so not very aggressive. My question is two fold. First, if I wrap my typical kayfun build at 1.2 ohms, my dripper will naturally burn less juice since it is putting out less wattage, that's my assumption at least. Now, to test flavors, not looking for clouds, will 1.2 ohms be better, and I know it will fire fine, but will an rda do well that high. Again, going for flavor testing, and trying to use up as little as possible.
Next I won't do this for the flavor testing, but I do want to build my first dual coil, and aside from matching the ohms, and dividing by two to get the desired resistance, my concern is in how you accurately read each coil, since they'll be attached to my Igo, at least that's the only way I can think to do it. I'm guessing I build one coil, and test that, then build as identical as possible wrapping etc... for the second one, and if my ohms read half of my first, I'm good? I can build 1.2 ohms almost perfectly every time at this point, so I'm guessing what I asked should work, and if it reads .6 after I've wrapped and read ohms with coil two I'm good. Also, what happens if your coils don't match ohms perfectly?
Any answers or suggestions for both questions are much appreciated, mainly on the dual coil, since I'm pretty confident in my flavor testing build. I just have a desire to step up my game a bit, so to speak, and the only thing preventing me from dual coiling is matching ohms accurately between coils.
Now, I don't use my dripper much since it eats juice, and I've only gone down to .6, so not very aggressive. My question is two fold. First, if I wrap my typical kayfun build at 1.2 ohms, my dripper will naturally burn less juice since it is putting out less wattage, that's my assumption at least. Now, to test flavors, not looking for clouds, will 1.2 ohms be better, and I know it will fire fine, but will an rda do well that high. Again, going for flavor testing, and trying to use up as little as possible.
Next I won't do this for the flavor testing, but I do want to build my first dual coil, and aside from matching the ohms, and dividing by two to get the desired resistance, my concern is in how you accurately read each coil, since they'll be attached to my Igo, at least that's the only way I can think to do it. I'm guessing I build one coil, and test that, then build as identical as possible wrapping etc... for the second one, and if my ohms read half of my first, I'm good? I can build 1.2 ohms almost perfectly every time at this point, so I'm guessing what I asked should work, and if it reads .6 after I've wrapped and read ohms with coil two I'm good. Also, what happens if your coils don't match ohms perfectly?
Any answers or suggestions for both questions are much appreciated, mainly on the dual coil, since I'm pretty confident in my flavor testing build. I just have a desire to step up my game a bit, so to speak, and the only thing preventing me from dual coiling is matching ohms accurately between coils.
