A Few Postless RDA

[MyMagicMist]

I have the following that I can recall at the moment.

1 Elder Dragon

1 Tobhino

Do not have any original packing but they are lightly used and I'm reasonably sure I can locate their "spares" packs. They are ultimately up for P.I.F. though as they are both mid range RDAs I might like a trade for one, of roughly half retail value.

For example say the Tobhino goes for about $20 retail. Fast Tech has Narda clones or did for roughly $10. If someone wanted to trade such as that I'm not adverse, yet still both of these are up to be sent out.

Find myself not too keen on post-less style decks, that's the only reason I'm passing them up. I used the Elder dragon a bit until I decided to swap the coil it had been shipped with. Silly me. Wanted to try and see if I could manage not fumbling on building post-less. Well, ... gee. *chuckles* So, these style decks are out of bounds for me.


PM with shipping address, first come, first serve. I'll let everyone know here if something gets shipped out, what remains.

 

[MyMagicMist]

I have some interest. We'll see if they desire one, or both. Update will follow ASAP.

 

[MyMagicMist]

Here's an update, rather addition.

I also have 1 Athena RDA which come with the Athena kit. It was not used. Again, no original packaging as I usually need to keep rubbish minimized. And again, think I can reasonably locate a "spares" pack for this one.

You can take one, or all three for one lot. Again, first come, first serve.

Only still 1 "interest". What that means is that's what they expressed, "interest". They're not saying they'll take yet.

These are good RDAs, if not fully new, only lightly used. Again, only passing them up because for me post less decks are not a cup of tea. I'm sure many love post less decks. C'mon and get sum!

I ship via USPS, even international. No, I do not charge for shipping. I perhaps should but I have not, see no reason to start. All I ask is you pm me with a shipping address. I can send to a P.O. Box if you want, doesn't need to be a home address. Besides, worst case I ship out some goodies for you sometime as just simple "care" packages. You never can tell.

 

[Rhianne]

Do you still have the ED? No joking. Lol

 

[MyMagicMist]

Do you still have the ED? No joking. Lol

I do but I have Interest pending. Whoever is first with a Pmed shipping address and specific what they want get it shipped to them. Sorry its first come first serve but i don't know any fairer way.


UPDATE --- Person expressing interest is nabbing up the lot, all three. If he doesn't like one he'll pass it along too.

I'll update that person with a tracking number ASAP and will get them shipped out this week ASAP. Your Welcome.

 

[Rhianne]

I do but I have Interest pending. Whoever is first with a Pmed shipping address and specific what they want get it shipped to them. Sorry its first come first serve but i don't know any fairer way.


UPDATE --- Person expressing interest is nabbing up the lot, all three. If he doesn't like one he'll pass it along too.

I'll update that person with a tracking number ASAP and will get them shipped out this week ASAP. Your Welcome.

Thanks, wonder twin. I have a feeling I know to which quarter this will go.

 

[Bigrick]

You are very generous. I am glad your rta's found a good home. You have blessed me past and a pillar of the community. Thank you for you.

 

[ChainVapeS]

Thank you @MyMagicMist for this. I'll be sure to give them a good home. If I dont like one or all, I'll put them back up for pif. Very generous, and very awesome of you.

 

[Rhianne]

Thank you @MyMagicMist for this. I'll be sure to give them a good home. If I dont like one or all, I'll put them back up for pif. Very generous, and very awesome of you.

He is awesome, Chain. You’re a good guy, as well. I hope you really enjoy them, brother.

 

[MyMagicMist]

You have blessed me past and a pillar of the community. Thank you for you.

Very generous, and very awesome of you.

He is awesome, Chain.

Shh. All this kind of talk might give people the idea I live to what I believe, and am "something special". I am not anything special at all. These RDA were in part P.I.F'ed to me with kits or as extra gear and a kit.

As I said I tried their post-less design. Physical limits and spacial relations get jumbled, keep me from enjoying post-less RDAs. Why let them collect dust? Instead let others have use and share as I've been shared with.

One of the RDA had a 510 drip tip oh how do you say conversion piece? Well, I had it but it went M.I.A as I was packing them up to get escorted out. I looked today for a bit to see if I could locate, no joy. Will try again more adamantly tomorrow.

Apologies, heat here has been terrible to say the least, humidity along with it. Rain hangs in the air but it just will not come. Even if it does we'll get broiled after immediately. This is why I'm slow moving in the search of that piece. It's somewhere on the floor and me squating, bending is no good in the heat. It'll be cleaned when located and put with the rest. I know it's general location.

Not "dragging my heels" without undue cause and no, not making an excuse either. *chuckles* I'm sure many understand our lovely friend high blood pressure.

Shipping out no later than Wednesday though. Hate to ship something missing only a single piece. May need to though. Not sure if it was for the Dragon or the Athena RDA, one of them though had that. The Tobhino already has a 510 tip.

 

[MyMagicMist]

@ChainVapeS, I'll do this in the open because it is right to do. I apologize if this is not shipped out until Thursday. My wife needs to pick up a bubble mailer. She simply didn't get that far yet. With her working I'm understanding of her not recalling. But yes, I apologize I told you today and may not do that, but at its latest tomorrow it will go out. I tell you openly as I rather stay honest. I dislike breaking a word like this, it's not usual for me. As John Lennon said though, "life is what happens when you make other plans."

 

[ChainVapeS]

No worries! Im a very patient and understanding man.

 

[Rhianne]

No worries! Im a very patient and understanding man.

What is postless? I bought two of these from Wotofo. Now I’m scared since MMM said he didn’t like them!

 

[ChainVapeS]

Flat deck for building. No posts.
The coil leads go into holes sunk into the deck surface. A little more tricky to build on.

Sent from my SM-N950U using Tapatalk

 

[Rhianne]

Flat deck for building. No posts.
The coil leads go into holes sunk into the deck surface. A little more tricky to build on.

Sent from my SM-N950U using Tapatalk

Well then I won’t be starting building with those, but I’m glad I got them, anyways.

How’s things, Chain? Hope you and Mrs. Chain are doing good.

 

[Creature0069]

Well then I won’t be starting building with those, but I’m glad I got them, anyways.

How’s things, Chain? Hope you and Mrs. Chain are doing good.

Postless aren't really difficult. You just have to trim the coil legs before you install them. Wotofo is pretty good about giving something to measure the legs with.

Make sure to check which pin is installed in the 510. A lot of Wotofo atty's come with the BF pin installed. If you're not using a squonker, things could get messy pretty quick.

 

[MyMagicMist]

Postless aren't really difficult. You just have to trim the coil legs before you install them. Wotofo is pretty good about giving something to measure the legs with.

I bought a coil trim tool. Not to sound a buffoon but I could not make leads or coils from it. *chuckles*

But I agree it looks pretty simple to do. For me the finesse is not quite there in dexterity any more. Gee, grabbing up six chicken legs each hand, and other odd stuff might have contributed. *lol* Oh well, live once, live it hard.

 

[Creature0069]

I bought a coil trim tool. Not to sound a buffoon but I could not make leads or coils from it. *chuckles*

But I agree it looks pretty simple to do. For me the finesse is not quite there in dexterity any more. Gee, grabbing up six chicken legs each hand, and other odd stuff might have contributed. *lol* Oh well, live once, live it hard.

Yeah, not all atty's work for everyone. I have a few that I want to throw every time I build on them. Damn tiny flat head screws are the bane of my existence. I like postless mostly because the screws are usually recessed so I don't need to see them.

I just didn't want Rhianne to feel intimidated by them.

 

[MyMagicMist]

I just didn't want Rhianne to feel intimidated by them.

Oh no, me either. I was just expressing "not all atties are for everybody".